PDA

View Full Version : help on making my ported box



El_dorado
01-22-2004, 08:53 PM
Hello I have question on making a ported box and I have my external dimm. are 38 WIDTH x 17 DEPTH x 14 HEIGTH and I divided and gave me 5.2 cuft. after dis I suppose?<---,, I want to make a port in between the subs can u help me out on the port how long or by wxhxd? thanks... note I tried making one that would bend in the coner but it's kind of complicated , and I want to make theport that has a long rectangular one in the middle of subs so how long in(DEPTH) would this be ??? and also (HEIGHT) and (WIDTH) THANKS .........:)

KARLEON
01-22-2004, 09:10 PM
i cant exactly help you with the port question, but i noticed you took the measurements of the outside of the box.

Assuming you will be using 3/4 MDF your internal dimensions would be
36.5L x 15.5D X 12.5H that number = 7071.875 divided by 1728 gives you about 4.09 cubic feet instead of 5.2

I think you forgot to take off the 3/4 for the wood

El_dorado
01-22-2004, 09:22 PM
is it ok if I use the 15 mm type of mdf on what dimm would it be ?and sorry yes I forgot to subtract the wood. and this will be on my hx2 dvc subs rfd2212 recomm. 2.0 cu ft. per chamberwill this be ok thanks again :)

Trixter
01-23-2004, 10:59 AM
Check your PM's.

El_dorado
01-23-2004, 07:08 PM
hey trixter check this out and tell me what u think?

El_dorado
01-23-2004, 07:49 PM
I think is to big it dont want to open :( How can this be

Trixter
01-24-2004, 10:11 AM
Yeah, I can't get it to open or unzip.

El_dorado
01-24-2004, 01:21 PM
[IMG] trixter let's see

El_dorado
01-24-2004, 01:25 PM
ok again lets see