PDA

View Full Version : RAM_Designs feedback thread



RAM_Designs
08-26-2010, 07:03 PM
Figured I'd start one to keep track of the boxes I help people with(a little late now, but whatever)...if I've done something for you, please post your experience here whether it be good or bad.

Deeper_shades
08-26-2010, 07:22 PM
Good Guy here,

My past experience with other box builders had been not very good, barley any information was asked from me, and wham heres your design, dont ask me anymore questions.

Ram_designs was not like that at all, he asked me alot of questions I failed to even consider, and he spent time trying to figure the best possible box design for my specs, goal, and MY ideas. Altho I haven't decided what I will go with yet, he has given me a few options to think about. I like that he takes the time to explain his ideas and his knowledge of building a great box.

anyways,

So far so good, updates to come

BigSix
08-27-2010, 02:27 AM
Figured I'd start one to keep track of the boxes I help people with( a little late now, but whatever)...if I've done something for you, please post your experience here whether it be good or bad.


man I have been meaning to pm you......well the design i got for you for those two 9515g's...well the box was made back in may.....however I just installed the box and subs in my suburban the other day and maaan.......they are still breaking in but wow.....the box sounds great! sad thing is i have them hooked up on a aq2200d but only at 2 ohm because of my ****** stock electrical system at the moment but even at that this box wangs!!! cant wait to get another 2200 and upgraded electrical system......thanks for the design!

Sweet'n Low
08-29-2010, 10:09 PM
Very helpful. First Non-Fabracated Box. Did/Doing a great job walking me though it. Putting it together tomorrow, hopefully it looks and sounds as good as the design looks. $10

nateberrier
08-31-2010, 02:31 AM
I have paid 10 bucks for some wayyyy crappier box designs. Gave me very detailed drawings and accommodated my parameters well. box is solid and takes a beating and is loud as balls. I have recommended him to others and with good result.

Wolverine19D
09-01-2010, 11:02 PM
I am new to car audio and got a box design from him and must say I am impressed. I haven't built the box yet but the design is very detailed and all of the measurements will help a great deal. Thanks for the box design! Next time I need a box design I know who to look for!

hrtbrk1
09-01-2010, 11:13 PM
this u ryan? if so man u do good work!

RAM_Designs
09-01-2010, 11:21 PM
this u ryan? if so man u do good work!

Indeed it is...and thank you.

Streetglow304
09-02-2010, 06:47 PM
I've gotten 3 box designs from Ryan and he's the only one I'm ever going to use. Designs are great, it really couldn't get any better! Highly recommended

info
09-02-2010, 09:58 PM
Well , I must say the design and prompt service , A++++ . Highly recommend his design . I post here how to build a box and ram e mailed me with in one hour i had a great design .4-8" sub box design
I started a blog on his design . If you want to see and follow my build .
http://www.caraudio.com/forum/car-audio-build-logs-cars-trucks-suvs/487735-1999-ford-escort-first-sub-box-build.html
Again thank you
Ram Design

pelekeliko
09-02-2010, 10:09 PM
just like everyone else is saying. great guy to deal with and asks plenty of questions. doesnt seem to just want to design boxes for a quick buck but takes the time to ask what your realling looking for and gives you his two cents.

first time dealing with him was about a week ago and I will never go to anyone else again.

jdmferio13
09-12-2010, 09:25 PM
x2^ awesome guy great designs. Thanks again man will do business again prolly something different but will do again.

stangman67
09-29-2010, 11:16 PM
Great designer here. I employed him to design me a box for my 4 sa-8's with pretty strict workable dimensions. He was able to design a really sweet box within one day. I highly recommend Ryan !

bhsdriller
09-29-2010, 11:34 PM
Great guy to deal with here. He's designed 2 boxes for me already.
super fast (same day), always responds to pms, and will work with you on the design

Thanks

Febrewary
10-01-2010, 06:30 PM
Would Definately reccomend, very professional and quick, great to work with. Has designed two boxes for me and will go back to RAM_Enclosures for more designs.

BiaBia
10-02-2010, 01:41 AM
A++++++++++++++

I honestly didn't expect a schematic so in depth. I will be making future transactions with Ryan in the future.

thisistiny
10-02-2010, 03:54 AM
Like everybody says, AWESOME guy here. Ryan gave me exactly what i wanted. Very detailed design. Very quick turnaround.
Worth every penny. Can't beat the price either.
Highly recommended!

SpiderX1016
10-09-2010, 05:18 AM
Nice communication. Cheap price and Like everyone says, a good detailed design. It's hard to beat that.

NATETHEBASSMAN
10-18-2010, 12:23 AM
Awesome design,!! fast communication, fast work, patient with customer, easy transaction, overall a great designer, look no further than RAM_Designs for all you box needs!!! im deffinately coming back in the future thanks Ryan!!

GavinVoy
10-24-2010, 08:41 PM
A+

designed next day, well informed, and very helpful.

thanks.

k3n12ock
10-30-2010, 01:33 AM
Great guy and great designs. Actually took the time and went over what I wanted to accomplish, even though the end result is a total 180 of what I was planning to do. Patient guy and excellent designs. Thanks Ryan!

Bman194
11-03-2010, 11:48 PM
Had a great experience here, worked with me on the dimensions that needed to be precise to cover an entire area and asked questions that I would have other wise just forgotten and left out. Definitely looking forward to putting it together and will recommend to anyone else looking for a design

Mitch86
11-04-2010, 12:04 AM
Good guy IMO. Answered some questions and helped me out even though I didnt buy anything. :)

matt_bennett05
11-04-2010, 12:17 AM
He was truly superb in all aspects with the experience i had. Very informative and quick to respond.

AND i have been recommending him to anyone with any box problems that I have run across.... even noobs hear his name now! :thumbsup:

RAM_Designs
11-04-2010, 12:20 AM
Thanks for the kind words everyone.

1rockford1
11-07-2010, 11:03 PM
hey guys im new to building and i was driving my self nuts about geting a box built. spoke to ryan and after like 5 min we worked out deal. i cant wait to finish what we started. if u guys need help with a box please pm him . thanks bro luv ya

A Zombies Minge
11-20-2010, 12:29 PM
Great design. I have not built the box yet, but will edit my post to include pics when its done. The design was affordable ($10) and it was very nicely presented. The 3D overhead view of all the pieces is going to prove very helpful and the list of pieces and sizes is a just what I was looking for. Thanks a bunch, and if anyone is considering having him design a box for you I would strongly recommend you do it as he puts together great designs.

kr15
11-20-2010, 12:36 PM
I had the pleasure of hearing the box he designed for bhsdriller, and let me say that it was a top notch box to say the least...Most impressive 8 setup I ever heard...

RAM_Designs
11-20-2010, 12:51 PM
I had the pleasure of hearing the box he designed for bhsdriller, and let me say that it was a top notch box to say the least...Most impressive 8 setup I ever heard...

Thanks. Was this the newer one that was tuned higher? He actually metered lower with that one, then we decided to do a port extension outside the box to lower tuning and he gained 2db from it...his truck loves the lower tunings.

kr15
11-20-2010, 12:59 PM
^^ i heard it both times. I was there when he metered like a 145, then I was there when he metered a 147...He should be at the show today also, he has the Sundown 8s now, so we'll see what those can do...and yes, his truck kills notes in the 30s/low 40s

Brewiz
11-28-2010, 07:37 PM
All I can say is WOW,,,,Emailed him yesterday and just got my design, what awesome service. Can't wait to build this thing and see how it sounds, hope I can do it justice when I build it.

Thanks Again
Mike

adixon816
12-03-2010, 12:18 AM
Such great communication with him, I wasn't exactly sure what I needed/what was needed and he helped me through every step and answered all my questions. Awesome looking easy to follow design can't wait to build, when I need a box for my brothers honda later on I know where to go now. I would not hesitate to recommend him to anyone reasonable price and he got my design to me an a very timely manner. Thanks again! - Alex

rangerboy101
12-12-2010, 04:43 PM
Great communication, fast work, VERY detailed plans, and WELL worth the money. I would highly recommend him to anybody looking for a quality design. Thanks again Ryan. Pleasure doing business with you.

bhsdriller
12-14-2010, 11:31 PM
Got another design for some more 8's.....Ryan does quick work, usually get the design done same day, very detailed plans

Can't wait to see what the new box does
Thanks

dpom
12-23-2010, 09:55 PM
He created a great design for a great price. Can't wait to build it.

ACE74
12-24-2010, 09:15 AM
big ups to Ram_Designs for the enclosure design he made for me. Will definitely get back with him for more in the future.This will be in a 1989 olds 88 Royale with a DD 2515a d4 sub hooked up to a u.s. audio Ya-X1500 amp


enclosure pictures by aaroncotton1974 - Photobucket (http://s1193.photobucket.com/albums/aa347/aaroncotton1974/enclosure/)

NJack2AF
01-02-2011, 10:25 PM
Got a box design last week, needed it in 24 hrs and offered an extra $5 for the quick notice, he said not to worry about the extra $5, did it for his usual price, in the time I needed, and it's a fantastic, detailed design with cuts provided. A++

Thanks man!

Oh6AcCoRd
01-05-2011, 02:33 AM
Good guy, fast. I gave him the info and it was in my email inbox in under an hour with detail and precision. 5 stars.

daboyfrumdabx
01-08-2011, 03:18 AM
Couldn't ask for more. Had my design within just a few hours of speaking to him, maybe an hour from the time we decided what we were going to do. It was kind of a picky box request but he worked with the space I had available and gave suggestions for what can change for the better. Great service. Thanks!

njknittle
01-10-2011, 12:54 AM
I was at a dead end till i found this guy. PMed him around 10 got my design back within an HOUR! Great service, Great info and Great design. I recommend this man to anyone whos looking for a box design. 5 Stars! Plan on building this box this weekend, and hopefully ill be posting a video of it directally after. Thanks again!

TrakDay
01-19-2011, 11:53 PM
It was well worth having Ryan design the box for me. I have never built a ported box so I was going to ask Ryan some questions and decided to just have him design it for me. I am happy... now I just need to build it! Hopefully I can get it done tomorrow after work.

This box is for my Ported SA-12 setup.

UMWDawg92
01-20-2011, 01:42 PM
Ryan does a great job, detailed cut list and design. He is great about communication and finding out exactly what you're trying to get out of your box. Overall he is a great guy to deal with and his designs are well worth what you pay for them. I will always be a return customer if I need another design.

azphat12
01-21-2011, 04:16 PM
Ram worked with me for some time trying to figure out which box to go with.
He answered all of my questions, and fairly quickly too.

I would absolutely recommend him to anyone looking for a box design.
The design I got was easy to read, and had a cut sheet too.

The design was well worth the price he asked for.

06goat
01-26-2011, 11:07 PM
Great guy, wont hesitate to work with again

kmanian
01-26-2011, 11:11 PM
Well, you know who I am, and may have seen some of my builds. I will say I am not a noob to the car audio scene. Well I thought I would let someone else design me a box, as creativity flows differently through different people. Well Ryan blew my mind with his design. I will leave it at that. I will be building it this weekend, and post some pics.

Thanks Ryan!

RAM_Designs
01-27-2011, 10:56 PM
Well, you know who I am, and may have seen some of my builds. I will say I am not a noob to the car audio scene. Well I thought I would let someone else design me a box, as creativity flows differently through different people. Well Ryan blew my mind with his design. I will leave it at that. I will be building it this weekend, and post some pics.

Thanks Ryan!

Thanks man, I look forward to the pics. :D

hamptodw
02-01-2011, 01:32 AM
Ryan is very professional and has designed me 2 boxes for me. Both boxes were done quickly and at fair prices. He is very patient with questions and designs boxes how you want them. I would definitely recommend his work for anyone needing a box designed.

TrakDay
02-03-2011, 07:23 PM
Well I thought I would update. I am extremely happy with the box Ryan designed, once I finally got my interior back together I realized it was designed and built perfectly for where I wanted it.

http://i2.photobucket.com/albums/y33/TrakDay/Stereo/L1010541.jpg

http://i2.photobucket.com/albums/y33/TrakDay/Stereo/L1010596.jpg

Should have carpet on it in a week or so when I find the time.
Also please realize this is not my daily setup!



Thanks again man...