PDA

View Full Version : Revised Tool Sale Thread - Tons Of Tools.



Johnny Law.Lulz
08-24-2010, 08:19 PM
I will make deals on multiple items. Jump on these quick if interested, i will have all of these posted on 4 or 5+ different sites and they move quick.

Vintage Snap-On 1/4” Torque Meter, Torque Wrench. Number on it is TQ-3. It is used but is in decent shape and still seems to work perfectly. $50 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060755.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060756.jpg

S&K 1" to 3/8"s Wrench set. Used but all wrenches in pretty good shape. I think there might be slight surface rust on one of them but i mightve switched it out already. $65 Shipped without the organizer.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060753.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060754.jpg

Mac Tools 10-19 Metric Wrench set. Pretty good shape. $55 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060751.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060752.jpg

S&K #4018 8 piece 1/2" drive Impact Set. 7/8"s - 3/8"s. $40 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060750.jpg

S&K #19707 7 Piece 3/8"s Drive screw driver socket set. $35 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060749.jpg

Johnny Law.Lulz
08-24-2010, 08:20 PM
Matco 3/8"s Drive Crows Foot Set. 3/8"S - 1". $100 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060761.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060762.jpg

Craftsman 10-17mm Wrench Set - $40 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060763.jpg

S&K 9-19mm Wrench Set - $60 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060764.jpg

Craftsman Double Box End Set - Wrenches are - $30 Shipped
7 and 9
10 and 11
12 and 14
13 and 15
16 and 18
17 and 19.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060766.jpg

Johnny Law.Lulz
08-24-2010, 08:34 PM
Matco T-150RA Torque Wrench. 30-150 In. lbs. Still has the box. Doesnt seem to be very used at all. $125Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060757.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060759.jpg

Matco TWORAD Torque Wrench. 30-200 In.Lbs. A little used but still works great. $125. Its the one under the one in the box.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060757.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060758.jpg

5 1/2" Ratchets. 3 Draftsman and 2 S&K. The one in the middle was rebuilt right after the picture was taken, i took the pic after to show that all new parts were going in it. The other S&K will also be sold with a brand new rebuild kit, it works great but i have the extra rebuild kit so im throwing it in. All work great now. A little dirty. $20 Shipped a piece. $30 for the S&K with the extra rebuild kit ( I will not include the rebuild kit with the newly rebuilt one ).

http://i92.photobucket.com/albums/l8/worstenemy453/P1060767.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060768.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060767.jpg

Kobalt SAE wrench set. 13/16s - 3/8"s. $20 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060765.jpg

Johnny Law.Lulz
08-24-2010, 08:36 PM
S&K Ratchet wrenches. I dont know the exact name of them but they are as follows. A couple of them are dirty but they all work as they should, i can clean them up better if requested but im sure they'll be dirty again soon. $30 shipped for all of them.
There are 2 of the 5/8 - 3/4. The rest there is only one of.
9mm - 10mm
11mm - 12mm
13mm - 14mm
15mm - 17mm
3/8 - 7/16
1/4 - 5/16

http://i92.photobucket.com/albums/l8/worstenemy453/P1060709.jpg

Badger 150 Airbrush. Works like it should. $125 Shipped. Comes with
- Extra needle, Extra head, air line, regulator, wall mount, wrench, feed cup, top for using paint cups, roll of teflon tape, case.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060715.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060713.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060714.jpg

Johnny Law.Lulz
08-24-2010, 08:56 PM
S&K Factory Sealed 1/2" Impact set. Size 3/8"S - 1 1/16". $95 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060778.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060779.jpg

3/8"s. S&K Swiveling Ratchet, Works great. $20 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060781.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060782.jpg

1/2" Stubby pivoting ratched. Unknown brand. $20 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060780.jpg

Johnny Law.Lulz
08-24-2010, 09:03 PM
S&K 6 piece Impact set. 7/16s-3/4. $30 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060784.jpg

2 Sets of Mac Weatherhead Sockets. $50 Shipped A piece.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060783.jpg

Johnny Law.Lulz
08-24-2010, 09:36 PM
Matco Composite 90 degree Die Grinder. Old but works great. $50 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060789.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060788.jpg

Box of drill bits with the holesaws and new bits included. Hole saws themselves are $8.99 a piece as you can see by the price tags. $20 Shipped for all.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060790.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1060791.jpg

Box of allen Wrenches. $20 Shipped.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060792.jpg

S&K Metric Wrenches. $20 Shipped.
16 and 18
17 and 19
20 and 22.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060794.jpg

Matco Open End Angle Wrenches. $25 Shipped A piece.
WOE A40 - 1 and 1/4
WOE A42 - 1 and 5/16
WOE A46 - 1 and 7/16
WOE A48 - 1 and 1/2.

http://i92.photobucket.com/albums/l8/worstenemy453/P1060793.jpg

Johnny Law.Lulz
08-24-2010, 10:19 PM
Pliers, Screwdrivers, EZ Read sockets, Notched craftsman wrench set and S&K 1/2" drive deep well silver set Sold.

Johnny Law.Lulz
08-25-2010, 09:27 PM
bump.

Johnny Law.Lulz
08-26-2010, 03:01 AM
Make an offer if you dont like my prices.

silenkiller
09-06-2010, 11:54 PM
Bump for some nice torque ratchets.

j1b1e1
09-08-2010, 10:53 AM
Still got the "box of bits?"

Johnny Law.Lulz
09-08-2010, 11:00 AM
nope.

Imtjnotu
09-09-2010, 05:07 AM
20 for the skin ratchet wrentches?