PDA

View Full Version : Question about using two aeros and port length



gsuchyta
07-02-2010, 08:43 PM
I just have one quick question about port length... * I am building a ported box for a single 12 it's 2.4 cubic feet at 35 hz using two 4 in aero ports now every port calculator I use says the port length should be 20.11 inches long with 2.4 cubic feet and two 4 inch aeros. My question is does that mean each aero port is 20" long ?or each is 10" long for a combine port length of 20"?*

nissanrider06
07-03-2010, 12:47 AM
no each is 20" long use this calc it works great for aero's
Products Menu (http://www.psp-inc.com/tools.html)

nissanrider06
07-03-2010, 12:48 AM
Idk why it says prduct menu but thats the link...

pm me wit any questions ill help you as much as i can I know how it is trying to figure that type of stuff out is. Its way easier when you have someone with some experience to talk to directly...

RAM_Designs
07-03-2010, 02:02 AM
Length is per port. I personally use the CarStereo.com - Car Stereo is the #1 Car Audio Online Resource (http://www.carstereo.com) calculators, click on the "how to guide" tab, then the "loudspeaker design and construction" link, and you'll see box volume calc as well as port calc. Very easy to use.

aussiek2000
07-03-2010, 07:34 AM
no each is 20" long use this calc it works great for aero's
Products Menu (http://www.psp-inc.com/tools.html)

where it says "flare length port required", do you measure from flare to flare or what?

spltuscon
07-03-2010, 08:13 AM
That is the total length with the flares on. The straight tube should be cut to 6" less than that to come out right.

aussiek2000
07-03-2010, 09:37 AM
OK, thank you.

gsuchyta
07-05-2010, 12:24 AM
alright cool thank you I was almost positive each was 20" long.