PDA

View Full Version : $50 to the winning design



kmanian
06-30-2010, 01:43 AM
I have the custom 10" that is in my avatar. the TS that are below
4" dual 1.5 ohm VC
good for lots and lots a wattz
Series 3ohms
fs-50hz
qts-.49
qes-.543
qms-5.701
vas. .5038cf
cms- .04 mm/n
mms-210.3grams
BL-20.28
le- 1.6mh
89.34db spl

This is all I have for TS measurements.

I want a box that is crazy loud, I will put 3kw+ on this sub.

I am thinking about a horn, but am open. I am a master carpenter and the crazier the better.

So my offer is this:

Send me your designs, to my email (PM me for it) and the one I pick I will pay you $50:greedy: to your PP account.

This is going in a van, just FYI

I will make my decision this Sunday.

rosshimself13
06-30-2010, 10:51 AM
can we all see this when completed?

Tw1st3d13
06-30-2010, 10:58 AM
I would have a box ported at 28hz for the low lows!! I'm not a box designer though =(

bhsdriller
06-30-2010, 11:18 AM
Imageshack - 175cubes32hz26sqin2rg.png (http://img62.imageshack.us/i/175cubes32hz26sqin2rg.png/)

mobeious
07-01-2010, 11:58 AM
I take it ur shooting for spl

brandon_s0854
07-18-2010, 03:54 PM
I would go to PWK If I were you. I've heard nothing but phenomenal things about those designs. Where'd you get the sub by the way?

soundstreamer
07-18-2010, 04:05 PM
I would go to PWK If I were you. I've heard nothing but phenomenal things about those designs. Where'd you get the sub by the way?

I've heard that PWK just puts everything in huge enclosures tuned high for lots of output with little power...