PDA

View Full Version : WTB box design



michaellane
06-14-2010, 05:15 PM
well first it needs to be from a senior member or from someone who has proven that they know what they are doing. box is for:

two DD3510C's reconed with dd3510E parts
will be ran off a mb quart dsc2000.1 proto :)

i want a regular slot ported box, tuned to 38, ports in the middle of the box between both subs. no port divider unless it will mess up tuning (so oine big opening for both ports. get it?)

34 long, 13 tall and however deep. dont have a real idea about size and what not..im guessing about 1.15cubes each after displacment??? anyways i have paypal. so ask away and ill do my best to answer.

OH going in a 2002 accord trunk sealed off

michaellane
06-14-2010, 05:33 PM
ffffffeeeeeeeeggggggggssssssssssss

rosshimself13
06-14-2010, 05:45 PM
honestly i read up on it and did my own design and feel very happy those 10's you sold me hit pretty hard in 2.5 tuned to 36hz on about 1000w each

bassman3
06-14-2010, 05:49 PM
I could do it for you bud. Shoot me a PM.

MONSONwarrior
06-14-2010, 06:26 PM
I can too, I'm doing one for Snakeye atm but shoot me a pm and if you want you can ask him about it after I get the design and cut sheet emailed over to him.

michaellane
06-14-2010, 06:34 PM
well can you guys mock it up in google sketch and also do cutout sheets and everything? and whats the price. let me know

AudioDave
06-14-2010, 06:40 PM
I wouldnt trust anyone on here. Go local so you know or do it yourself.

michaellane
06-14-2010, 06:42 PM
I wouldnt trust anyone on here. Go local so you know or do it yourself.

there are a few senior members who can do better then most local shops no matter where you live. i can get the box built i just want someone who will run all the numbers and make sue it will do what i need it to. dman is my normal choice but he is laid up in the hospital so im here looking for a design

MONSONwarrior
06-14-2010, 06:43 PM
well can you guys mock it up in google sketch and also do cutout sheets and everything? and whats the price. let me know

Google Sketchup is all that I use and I do cut sheets. I can do probably 10 dollars for it all because I'll spend close to an hour on it.


I wouldnt trust anyone on here. Go local so you know or do it yourself.

Fukk off, no one trusts you and that's why you say that.

michaellane
06-14-2010, 06:48 PM
Google Sketchup is all that I use and I do cut sheets. I can do probably 10 dollars for it all because I'll spend close to an hour on it.



Fukk off, no one trusts you and that's why you say that.

who have you done a design for? i need to know you know what youre doing. i dont want someone who is going to use online calcs to figure my box out. pencil, paper and a calc is what im looking for

MONSONwarrior
06-14-2010, 06:53 PM
I just did one for Snakeye but I have yet to give it to him, I did mine and a family member's. I use the12volt for a calc and then double check everything on pen and paper, they're actually very accurate with their from what I've seen but if I'm doing it for a customer I double check.

michaellane
06-14-2010, 06:55 PM
I just did one for Snakeye but I have yet to give it to him, I did mine and a family member's. I use the12volt for a calc and then double check everything on pen and paper, they're actually very accurate with their from what I've seen but if I'm doing it for a customer I double check.

if you can do mine with all pen, paper and hand held calculator and dont mind me posting it for someone else to double check then im down. and ill do $13.00 as a gift. if youre sure and are interested pm me and lets talk

MONSONwarrior
06-14-2010, 07:00 PM
if you can do mine with all pen, paper and hand held calculator and dont mind me posting it for someone else to double check then im down. and ill do $13.00 as a gift. if youre sure and are interested pm me and lets talk

ygpm, I forgot to ask what size wood and if you wanted a double baffle/flush mount?

michaellane
06-14-2010, 07:04 PM
ygpm, I forgot to ask what size wood and if you wanted a double baffle/flush mount?

.75mdf...no flush...just simple slot ported box.

mobeious
06-14-2010, 08:21 PM
i can hook ya up send me a PM

michaellane
06-14-2010, 08:24 PM
i can hook ya up send me a PM

PMed man i didnt think you were still active on here

michaellane
06-14-2010, 08:47 PM
clear PM's

on1wheel01
06-14-2010, 10:38 PM
the online calcs are pretty close. I use them to get a basic idea, then do the math myself to fine tune it and get it straight.

michaellane
06-14-2010, 10:44 PM
the online calcs are pretty close. I use them to get a basic idea, then do the math myself to fine tune it and get it straight.

ya i know. i just want it double checked. im going to try to keep this setup for a year or so if i can so i want it done right

ltr450racer690
06-14-2010, 10:47 PM
why not a port off to one side if i can ask. if so i make u a design for nothing

ltr450racer690
06-14-2010, 10:52 PM
if u can use a port off to the side. heres one. kinda small on the port area but should sound good

michaellane
06-14-2010, 11:00 PM
if u can use a port off to the side. heres one. kinda small on the port area but should sound good

honestly just figured my meter better with port firing between the two front seats...and i just prefer the look...you know...no divider but one port opening for both subs...nasty looking and every newb can tell it was built not bought

on1wheel01
06-14-2010, 11:23 PM
what program is that