View Full Version : BAWKZ for SA8s
nateberrier
05-27-2010, 09:11 AM
Anyone got a good design for two sa8s 30-35hz??
nateberrier
05-28-2010, 08:04 AM
No one wants to help me with this? Noone can make me a simple ported box? Anyone have winisd pro that i can use?
Sneakysh13
05-28-2010, 08:47 AM
what are your max dimensions and would you want a slot or aeroport design
nateberrier
05-28-2010, 08:55 AM
Slot and im going with 40 wide 26 long 14 tall. going in a hatch. Subs up port back if possible, if not thats alright too. 35hz probably
nateberrier
05-28-2010, 01:44 PM
ttt. I need this by tomorrow night. Ill throw a few bucks if noone is gonna do it free.
GAM3OVR
05-28-2010, 01:49 PM
how much power?
nateberrier
05-28-2010, 02:02 PM
Running a treo 750.1 at 4ohms or 2ohms. They will be getting less power till I get a new alt. Probably around 600-750 for time being.
1 or 4 sorry
nateberrier
05-29-2010, 09:23 AM
Someone wanna make me a box? 10 bucks to anyone with plans
nateberrier
05-29-2010, 01:17 PM
ttt
michaellane
05-29-2010, 01:19 PM
Tune to 36--38
Vossy
05-29-2010, 01:33 PM
Well, I'm not gonna do a drawing but here's some dimensions for ya
If you wanna use 14x40x26, and a tune from 36-38 here ya go.
Port facing rear:
12.5 high x 7 wide x 14 deep gives you a tune of 37.26 before sub displacement. and 6.07 cubes after port displacement.
Hope this helps ya.
Port for 34 hz:
12.5 high x 6 wide x 14 deep tune 34.55 hz. 6.18 cubes after port.
mossberg385t
05-29-2010, 01:53 PM
Well, I'm not gonna do a drawing but here's some dimensions for ya
If you wanna use 14x40x26, and a tune from 36-38 here ya go.
Port facing rear:
12.5 high x 7 wide x 14 deep gives you a tune of 37.26 before sub displacement. and 6.07 cubes after port displacement.
Hope this helps ya.
Port for 34 hz:
12.5 high x 6 wide x 14 deep tune 34.55 hz. 6.18 cubes after port.
mmm... 17 wide?
Vossy
05-29-2010, 02:05 PM
mmm... 17 wide?
17 wide..
14x17x26
36.66 hz
port. 12.5 high 2.75 wide 18 long 2.37 cubes after port.
KyleBechtold
05-29-2010, 02:06 PM
Well, I'm not gonna do a drawing but here's some dimensions for ya
If you wanna use 14x40x26, and a tune from 36-38 here ya go.
Port facing rear:
12.5 high x 7 wide x 14 deep gives you a tune of 37.26 before sub displacement. and 6.07 cubes after port displacement.
Hope this helps ya.
Port for 34 hz:
12.5 high x 6 wide x 14 deep tune 34.55 hz. 6.18 cubes after port.
????
nateberrier
05-29-2010, 02:08 PM
Ill pay you for photos.
Vossy
05-29-2010, 02:13 PM
Ill pay you for photos.
I'm heading to the lake in like 15 mins, so I can't do that atm.
I can give you cutouts quick. Also do you want center slot port or side slot port?
Which box design/tune do you want.
nateberrier
05-29-2010, 02:47 PM
side port back subs up. 37hz cutouts work ty
Vossy
05-29-2010, 03:01 PM
side port back subs up. 37hz cutouts work ty
Top/Bottom: 40x26
Back (if you want port towards trunk)- 12.5x40
Front: 12.5x32.25 (port on one side, doesn't matter)
Sides: 12.5x24.5 is the side without port, 12.5x25.25 side with port
Port: 12.5x13.25 (put behind front board)
FYI: Don't worry about paying me. It's all good
h.o. ill design something real quick for you
whats your email so i can send pictures and cut sheet to?
mossberg385t
05-29-2010, 03:52 PM
his email is nateberrier@gmail.com
here is a small picture here of the design :
http://i368.photobucket.com/albums/oo125/don_hampton90/Picture1.jpg
1.85ft^3 with subs loaded @ 30hz with 25in^2 of port
i will be able to send the rest tom. as i have to go to work today. double time! CHEA!