PDA

View Full Version : Millertime1028's 20K summer build



Millertime1028
05-19-2010, 11:34 PM
Allright, so the time has come to do another setup in the Jeep and decided to switch things up a little bit. Will be shooting for the same idea of peaking low but doing respectable #'s. I will update this thread as different parts of my setup arrive in the mail:cool:.

Sub Stage will consist of :

- Audioque 20k :cool:
- (2) Mechman 270 amp alts externally regulated at 16.5v (Big thanks to Matthew @ Mechman)
- (8) Powermaster d1400's (14v batts)
- (2) DC Level 6 18's as soon as Rusty hurrys those baskets up:p:
Box will be a secret !
- and a whole bunch of good ole 0 gauge runs to the rear


Front stage consists of :
- (4) Sets of Pioneer Premier d series components
- (2) Elemental Designs NINe.4's
- Running off a Pioneer Premier 880 PRS

http://i45.tinypic.com/2ed3x9j.jpg
-
http://i45.tinypic.com/8x3dq8.jpg
-
http://i45.tinypic.com/2lqmtk.jpg
-
http://i46.tinypic.com/2mrh4dg.jpg
-
http://i47.tinypic.com/33xbts6.jpg
-
http://i48.tinypic.com/2yzleld.jpg

More pics to come soon!

DB-Audio
05-19-2010, 11:36 PM
sweet should get loud cant wait to see numbers

Ronny
05-19-2010, 11:38 PM
Tuned in :)

Litunerkid
05-19-2010, 11:38 PM
Well god dam keith lol,you better swing by when this is done.!

connersdad19
05-20-2010, 01:01 AM
jeep looks clean...love the deck as well cant wait to see it finished.

Beerdrnkr
05-20-2010, 02:09 AM
Audioque 20k? Is it specially built for you?

GetLikeMe
05-20-2010, 02:13 AM
No the AQ 20k is for sale on there website for 1799 shipped. But it does 20k @ 18v / ~14k @14.4.. this should be a nice build.

Beerdrnkr
05-20-2010, 02:16 AM
No the AQ 20k is for sale on there website for 1799 shipped. But it does 20k @ 18v.. this should be a nice build.

I seem to be behind the times. Looking forward to this build.

AudioDave
05-20-2010, 03:18 AM
I know they test them but its scary sending that kind of money for items with no warranty.

Millertime1028
05-20-2010, 12:36 PM
Appreciate all the comments! As for the warranty, I guess its all apart of the game if something goes wrong with it. I'm confident that it shall perform nicely. UPDATE : Both alts are in and sitting right at 16.5v via the ext reg. Will be running 0 gauge within the next few days.

528hz
05-20-2010, 01:11 PM
:omg::bowdown:

Jaredturp
05-20-2010, 01:16 PM
Subscribed. **** nice amp. **** nice subs.

filtor1
05-20-2010, 01:53 PM
Tuned in to this!

Suicide Bobb
05-20-2010, 02:07 PM
Jesus, you aren't skimping at all! Tight amp, tight subs, tight comps, tight deck, ample electrical system...*******!

Davecubs14
05-20-2010, 02:22 PM
When I saw the title.....I just knew you were gonna run the new audioque 20k.

mlstrass
05-20-2010, 03:21 PM
should be a killer set up when it's done as you're taking the right steps.

Tonight I'm installing the first 20k sold...

RAB
05-20-2010, 03:29 PM
how long is the amp?

IMOVeCHICKENS!
05-20-2010, 03:59 PM
in 4 pics of gigantic amp

1rockford1
05-20-2010, 04:42 PM
should b pretty nasty.

LDW3RD
05-20-2010, 07:43 PM
Sounds awesome.

SonicBoomAudio
05-20-2010, 09:03 PM
System should be a beast

Millertime1028
05-21-2010, 10:25 PM
Thanks for all the feedback guys. Box design is complete and hoping to have some time and start building that over the next week or so ! Rab, the amp is a tad bit over 38 inches long and 63 lbs.

should be a killer set up when it's done as you're taking the right steps.

Tonight I'm installing the first 20k sold...

Thanks man. I was originally going to go with (4) 18 inch XL's but I would have absolutely no room left in my Jeep with just the box in it, let alone trying to fit the amp and batteries in after. So I figured stick with less cone area but just go with subs that will take some power, build an efficient box, and call it a day. And yea, I had a feeling you would beat me to the amp lol. On a side note: I have (2) BNIB DC level 4 xl 18's for those who are interested! PM me.

tez4life
05-22-2010, 12:08 AM
Literally jizz in my pants when saw what your planning on running, makes me very happy!!

I'm currently running the exact same comps right now, thanks to your vid on youtube and review on them!! Subscribed!!

hatedonmostly
05-22-2010, 12:13 AM
That's the cleanest mid-'90's Chrysler paint I have ever seen...lol

1rockford1
05-22-2010, 02:23 PM
meh mayb mid 40's set up at best. lol

Ali1
05-22-2010, 02:49 PM
nice equipment... looking forward to the build

Millertime1028
05-22-2010, 05:16 PM
meh mayb mid 40's set up at best. lol

That is pushing it Joe lol :p:


nice equipment... looking forward to the build

Thanks man

tukn18s
05-22-2010, 05:20 PM
definitely looking forward to more pics. I want to see a 20k, and the level 6s. Awesome!

blazron22z
05-22-2010, 06:30 PM
nice cant wait to see this... what are the lvl6?? lvl5 with ti baskets??

Millertime1028
05-22-2010, 08:22 PM
^ Larger motor than the level 5. 4 inch coil. 10 inch spiders. Larger coil gap helping it do quite well on music. You may have seen the few "prototypes" pics floating around. The baskets on the official level 6's will be CNC machined.

dub22
05-23-2010, 12:22 PM
man cant wait to see this done nice equip

schrummy
05-24-2010, 01:41 AM
i want to see that beast of an amp

IMOVeCHICKENS!
05-30-2010, 11:49 AM
beast amp there yet?

blackxj
06-06-2010, 09:36 PM
u gona need to lift the back end up on that thing now for shure hahah lmk ill help ya if u need....2 in shackels should be fine

silvercookie
06-06-2010, 09:40 PM
jesus christ, why am i just seeing this now.
if you ever need help with anything, feel free to shoot me a pm, im always down to help out.

revrider1
06-06-2010, 09:43 PM
Setup sounds amazing, nice equipment...

blazron22z
06-20-2010, 07:38 PM
updatess???

Project_dog
06-21-2010, 02:31 AM
looking foward to see what you do.

schrummy
06-21-2010, 03:24 AM
updates???

Litunerkid
06-21-2010, 10:49 PM
Millertime1028 has been on vacation but is getting back tomorrow if im correct.on a side note: keith glad to see this build in progress!

schrummy
06-22-2010, 03:29 AM
a vacation is no excuse.......

1rockford1
07-04-2010, 07:14 PM
so any updates bro?? i sent you a pm just to see whats good.

Millertime1028
07-08-2010, 11:20 PM
UPDATE: Allright well I have decided to do a temporary setup while im still in the waiting line for the Level 6's as the baskets are still in production:crap:.

-RD d9 @ 16.5v running at .5 ohms.
-DC XL 18's
-Using the same box I had my BL's in. Just added a few things inside the box to help efficiency.

Big thanks again to Matthew @ Mechman. If anyone needs an Alt or Battery, or even custom brackets, etc.. he's the man to talk to!

On to the pics and vid of temp setup.
1
http://i31.tinypic.com/14cbmh3.jpg
2
http://i27.tinypic.com/2cxvzg0.jpg
3
http://i25.tinypic.com/20kxggi.jpg
4
http://i26.tinypic.com/25pr9f6.jpg
5
http://i25.tinypic.com/13yijc3.jpg
VIDEO
YouTube - NEW SETUP- DC sounds - 7/ 8/10 (http://www.youtube.com/watch?v=MXl6nZYfF6U)

1rockford1
07-08-2010, 11:26 PM
nice

mobeious
07-08-2010, 11:37 PM
where u get the batts?

thericanballer
07-08-2010, 11:45 PM
the system you have now is amazing, i can only imagine the new one...i cant wait to see

Millertime1028
07-08-2010, 11:51 PM
where u get the batts?

Ordered them through Matthew @ Mechman.


the system you have now is amazing, i can only imagine the new one...i cant wait to see

Thanks man lol. I have to say the XL's suprised me to say the least. The level 6 should be fun to mess around with.

Millertime1028
07-08-2010, 11:53 PM
DBL post FTL

thericanballer
07-08-2010, 11:54 PM
Thanks man lol. I have to say the XL's suprised me to say the least. The level 6 should be fun to mess around with

i have a 15" xl and its loud as balls to me. i wish i could do two or even lvl 6s. i love how dc subs sound so good at the same time tho

Millertime1028
07-08-2010, 11:57 PM
Yea from what Rusty is saying the level 6 will be in the ballpark with the xl as far as "musical" properties go so I'm looking foward to that.

thericanballer
07-08-2010, 11:59 PM
Yea from what Rusty is saying the level 6 will be in the ballpark with the xl as far as "musical" properties go so I'm looking foward to that.

yah cus i heard the lvl 5 was straight up raw spl. if he made the lvl 6 both like the xl, should be one hell of a sub

thericanballer
07-08-2010, 11:59 PM
Yea from what Rusty is saying the level 6 will be in the ballpark with the xl as far as "musical" properties go so I'm looking foward to that.

yah cus i heard the lvl 5 was straight up raw spl. if he made the lvl 6 both like the xl, should be one hell of a sub

emilimo701
07-09-2010, 10:23 PM
hey if you don't mind could you explain the components in your doors!? sound/size/imaging

i only see two tweeters! is there one up higher?

killer video with the pink floyd. everything looks really clean so far. nice job

Millertime1028
07-10-2010, 12:50 AM
The tweeters for the component set furthest to the front of the truck is up right next to the door handle. Basically about a foot above the mids. As far as imaging goes... Considering I've run 3 way active in the past this does not suffice when compared to that sound stage when all sets are playing. Now if I use the fade on the HU and just play through the front set, imaging improves .

treylittlefield
07-10-2010, 04:43 PM
would the 16.5 volts not hurt the batteries?

emilimo701
07-11-2010, 03:05 AM
The tweeters for the component set furthest to the front of the truck is up right next to the door handle. Basically about a foot above the mids. As far as imaging goes... Considering I've run 3 way active in the past this does not suffice when compared to that sound stage when all sets are playing. Now if I use the fade on the HU and just play through the front set, imaging improves .

gotcha.

so in theory, would it have been better to bunch the three tweeters together, higher up?

Mr. Slate
07-11-2010, 05:56 AM
Who designed the box?

misfit138
07-11-2010, 06:09 AM
****** build is ******.

thericanballer
07-11-2010, 12:24 PM
****** build is ******.

****** build is ******? lol

emilimo701
07-12-2010, 02:26 AM
****** build is ******? lol

it's a LolCat paraphrase

Millertime1028
07-13-2010, 09:42 PM
:ohsnap:

1.
http://i25.tinypic.com/2vtbhhf.jpg
2.
http://i30.tinypic.com/awtjzp.jpg
3.
http://i31.tinypic.com/8wz1fk.jpg

LDW3RD
07-13-2010, 10:23 PM
Oh snap indeed. Thats nice, congrats.

schrummy
07-14-2010, 12:19 AM
http://i261.photobucket.com/albums/ii65/schrummy_14/forum%20gifs%20and%20pixs/Icame.gif

DonH
07-14-2010, 12:24 AM
a temp setup? wtf! haha sick as temp setup! cant wait for the legit setup. what numbers you hoping to do?

hatedonmostly
07-14-2010, 12:34 AM
Are all AQ amps made in Korea? :confused:

thericanballer
07-14-2010, 01:34 AM
http://i261.photobucket.com/albums/ii65/schrummy_14/forum%20gifs%20and%20pixs/Icame.gif

http://i269.photobucket.com/albums/jj67/therican33/a1cc55f652bc1ebb3586f831943a4feb.jpg

chevyrider96
07-14-2010, 04:01 AM
Made in Korea???

na_rsx
07-14-2010, 10:29 AM
:ohsnap:

1.
http://i25.tinypic.com/2vtbhhf.jpg
2.
http://i30.tinypic.com/awtjzp.jpg
3.
http://i31.tinypic.com/8wz1fk.jpg


http://i261.photobucket.com/albums/ii65/schrummy_14/forum%20gifs%20and%20pixs/Icame.gif


http://i269.photobucket.com/albums/jj67/therican33/a1cc55f652bc1ebb3586f831943a4feb.jpg

http://www.kaosradioaustin.org/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=4204&g2_serialNumber=2

wu501
07-14-2010, 11:55 AM
crazy **** bro....

O.G. D-Wet
07-14-2010, 04:42 PM
LOVE it! How much do XLs go for?

thericanballer
07-14-2010, 11:03 PM
LOVE it! How much do XLs go for?

prices are confidential just call or email dc

Litunerkid
07-17-2010, 09:38 AM
keith we heard you demoing at autozone yesterday.We were 2 miles down the road at the mastic movies lol.I wanna hear this in person!

blackxj
07-17-2010, 10:12 AM
lookin good as always...

Skip01
07-25-2010, 07:32 PM
hurry upppp

Litunerkid
07-28-2010, 12:42 AM
well im glad i went to bald hill tonight lol.Your jeep was hands down the loudest one at the show tonight.I think this is close to a 156 on the TL.I sat in Wes's truck and he said hes doin a 153 with his solo x 18's.I couldnt sit in yours lol.thanks again for the demo

1rockford1
07-29-2010, 07:54 PM
so when am i gona get a demo? i drive past the road to go towards your house everyday lol.

schrummy
07-30-2010, 12:12 AM
VIDS NOW!!!!!


please

Millertime1028
08-17-2010, 12:42 AM
Heres a quick vid as per request of the XL's YouTube - Quick vid of the Jeep Demo'ing. (http://www.youtube.com/watch?v=femFNU5q1l8) LvL 6's shall be here soon!

Millertime1028
08-17-2010, 12:43 AM
so when am i gona get a demo? i drive past the road to go towards your house everyday lol.

Give me a ring when your near by. Or stop by the shop. PMing you...


a temp setup? wtf! haha sick as temp setup! cant wait for the legit setup. what numbers you hoping to do?
Thanks man lol. Looking forward to those Lvl 6's myself. As for #'s . Really not too sure as of right now. The XL's with 8k are doing 154.8@38hz. TL meter on the dash, driver window down. The truck absolutely hates being sealed up due to the low tuning. I would assume the lvl 6's in the more efficient box on the 20k should bump that score up a litte bit.



well im glad i went to bald hill tonight lol.Your jeep was hands down the loudest one at the show tonight.I think this is close to a 156 on the TL.I sat in Wes's truck and he said hes doin a 153 with his solo x 18's.I couldnt sit in yours lol.thanks again for the demo

Appreciate the good word man lol. Glad you enjoyed the demo.

lookin good as always...

Thanks Mike, now I need to bring the Jeep over to the Truck Stop and get that rear lifted an inch or two ..

AQHDC3
08-17-2010, 01:04 AM
Looks pretty good. In for more vids.

audiobahngods
08-17-2010, 01:50 PM
Thats BAD A$$. If you dont mind me askin how much was your budget for all that?

Litunerkid
08-18-2010, 04:51 PM
lol @ the hairtrick with the door open

jdmferio13
08-18-2010, 09:48 PM
how big is box

Millertime1028
08-18-2010, 10:25 PM
^ If your asking about the box the XL's are in it is 15.4 cu/ft net. Same box that the BL's were in. The level 6's will be in a 15.7 cu/ft net box. Will be using (2) 12 inch flared sono tubes for the ports.

1rockford1
08-19-2010, 08:25 AM
im still workin out in riverhead, mayb one day befor i go to work i could stop by if your home to check it out.

Jroo
08-19-2010, 10:16 AM
do you have any pics showing how you made and attached your door panels. I want to do something similar in my pathfinder and do 2 pairs of seperates up front

1rockford1
08-23-2010, 04:21 PM
keith you got a pm bro, im lookin to do somthing in my car but im throwin around a few diff ideas. i would like to go over it with you if you see this pm me please. thanks bro

Millertime1028
08-23-2010, 10:06 PM
do you have any pics showing how you made and attached your door panels. I want to do something similar in my pathfinder and do 2 pairs of seperates up front

Here are pics of the build process. With the speakers not installed I attached them to the doors by using self tapping 1 inch screws.

http://www.caraudio.com/forum/car-audio-build-logs-cars-trucks-suvs/361147-2-18-inch-fis-jeep-cherokee-more-build-24.html


keith you got a pm bro, im lookin to do somthing in my car but im throwin around a few diff ideas. i would like to go over it with you if you see this pm me please. thanks bro

PMed you back.

Millertime1028
08-25-2010, 12:59 AM
lol @ the hairtrick with the door open

Decaf songs FTW :) !

blackxj
08-30-2010, 05:41 PM
decaf songs are ftww......lmao if u buy the add-a-leaf ill put it in for u you can just swing by my shop save urself like 100 bucks

Millertime1028
08-31-2010, 01:07 AM
^ Yea I'll Let ya know what I decide to do. Not sure what route I'm taking yet.

1rockford1
09-05-2010, 09:03 PM
more vids???

TnT_Sounds
09-06-2010, 01:44 AM
^ Yea I'll Let ya know what I decide to do. Not sure what route I'm taking yet.

stay away from airbags, unless you plan on hardlining everything

ThatChevyGuy
09-06-2010, 01:49 AM
what did you do to get 16.5v?

blackxj
09-06-2010, 02:08 AM
stay away from airbags, unless you plan on hardlining everything

airbags on a unibody is a fail in itself........

Millertime1028
09-06-2010, 08:43 PM
stay away from airbags, unless you plan on hardlining everything

Yea no Airbags. Just trying to decide the amount I will lift it. I'm thinking a 2 inch leaf spring kit in the rear will level things out back to stock ride height.

what did you do to get 16.5v?

Using an External regulator..

IMOVeCHICKENS!
09-07-2010, 02:05 AM
where did you get you lift kit from im having some issues with my rear suspension of course from too much weight

1rockford1
09-15-2010, 03:59 AM
bro i wana check this out u should sell me some wire , i should b free some time next week. pm me to set up a time and if u can get me the wire. if u guys dont know keith is a good guy and he is allways willing to help out someone
.

Millertime1028
09-27-2010, 10:39 PM
Little Update: XL's are now beefed up with upgraded lvl 5 spider packs, different coil assemblys, and expoxied glue joints. Reason being is during testing a few weeks back one of the xl's coils ripped itself right from the cone. Had a d9 on each xl ;-) . Rusty had a nice laugh with that one. Big thanks to him I recieved some nice recones for these. Testing on new recones will be done over the weekend. Seem to be a bit louder then the stock xl's. More vids will be up of the Xl's with 4k to each. Stay tuned!

1rockford1
09-28-2010, 11:23 AM
***** about the coil but thats cool about the recone.

Boldtothemax
09-28-2010, 09:10 PM
Wow mang, sick install! Nice clean arse Jeep to boot! Very impressed!

Also that vid to pink floyd was the bee's knees!

Millertime1028
09-28-2010, 09:35 PM
***** about the coil but thats cool about the recone.
Yea the recones turned out to be a benifit. Here was the aftermath of 6k @ 30 hz... :-)
http://i53.tinypic.com/6z22oh.jpg

Wow mang, sick install! Nice clean arse Jeep to boot! Very impressed!

Also that vid to pink floyd was the bee's knees!

Appreciate the comments! That video had funny story behind it.... That is my O so sweet girlfriend in which she was not in any mood to be filmed that day lol. We were driving and I decided to pull over on a back road and shoot a quick vid ;)

Wingsfreak9
09-28-2010, 09:45 PM
sounds a little excessive =)...then again theres no such thing in the car audio world so carry on.

Millertime1028
09-28-2010, 09:50 PM
lol trueness^

Buck
09-28-2010, 09:51 PM
Ya, that would definitely do the sub some harm, lol.

Millertime1028
09-28-2010, 09:59 PM
Yea, they took it like a champ for a few rounds of testing. It was about the 6th time metering that night when all of a sudden it sounded like a car crash in my back seat . lol

1rockford1
09-30-2010, 02:08 PM
Yea, they took it like a champ for a few rounds of testing. It was about the 6th time metering that night when all of a sudden it sounded like a car crash in my back seat . lol

Well i got a little demo today, not only does everything look good but it gets loud and sounds great. the voltage staying so high was the best part of the demo. let me know when that meter comes i wana stop by for sure.

Millertime1028
09-30-2010, 09:22 PM
Thanks Mang ^ Will surely hit ya up when it comes in

Millertime1028
10-10-2010, 02:52 AM
Level 6's are finally on their way!

*SlappinAzz*
10-10-2010, 02:53 AM
Level 6's are finally on their way!

spare me one.

Litunerkid
10-10-2010, 02:57 AM
me too :) can i has one?Cant wait to see these in person...........

1rockford1
10-10-2010, 02:18 PM
Level 6's are finally on their way!

c oolz

blazron22z
10-11-2010, 07:44 PM
Can't wait to see pic of them beast

jbizzle
10-18-2010, 10:08 PM
I heard this thing is doing some pretty nasty #s... Keep up the good work, get some pics in this bish.

PioneerSPL1990
10-18-2010, 10:31 PM
where the **** are the six's lets see some pics!

Litunerkid
10-20-2010, 07:33 PM
I heard this thing is doing some pretty nasty #s... Keep up the good work, get some pics in this bish.

yea seen this metering on the TL the other night. 155+@ 37hz :crazy: lol.We grabbed some pics and vids so Millertime should be posting up soon.

blazron22z
10-25-2010, 03:56 PM
Updatesssssss

adio
10-29-2010, 09:22 PM
double bump!!!!

Buck
10-29-2010, 09:31 PM
Pics of the lvl 6's, and not in the box. We need them nudez :fyi:

power-fanatic07
10-29-2010, 09:38 PM
Pics of the lvl 6's, and not in the box. We need them nudez :fyi:

This

1rockford1
11-11-2010, 02:09 PM
new vids???

blackxj
11-25-2010, 03:43 PM
buy these.....i will put them in....ya leaves are hurtin man lol

http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=RC-2121&Category_Code=LEAF

1rockford1
11-25-2010, 03:45 PM
^^^hmmm

thegr8cody
12-16-2010, 11:05 PM
what kind of step downs are you running also how many.and what size batery is under the hood i see you got four 1400's in the rear

Litunerkid
12-19-2010, 01:10 PM
^hes not running any stepdowns.luckly the jeeps are ok up to 17v on the stock electrical.ive spoken with mechman about this s i have a jeep as well.He has a d1400 under the hood.well the last time i saw his truck in person he did.

thegr8cody
12-25-2010, 08:36 PM
lucky bastard wish my sierra would take 17 volts daily

joe14
01-03-2011, 03:38 PM
hey...umm when u install u alternator....you didnt have any problems making the alternator to charge...cuz i have the same style jeep...mine is a 94 but when i got my mechman alty l couldnt make it charge... i have like a black module box tht goes to the back of the stock alty but when i got the mechman alty it came with the plug with two wires..but didnt knw where to hook them up..because the stock alternator only has the one wire charging cable...so i called mechman and he told me to rewire direct to an on off switch 12volts....so i did tht and it charge but my vltage would fluctuate and then sometimes my voltages would be all the way down and stay like tht...and well my friend told me maybe i needed a external regulator...i just want to figure it out because i took the alty off been sitting in my closet for like 4 months now...idk if u can give me some advice wht it could be since i see u have two alty and an external regulator and its a jeep lol... would appreciate it

Millertime1028
01-05-2011, 11:44 PM
hey...umm when u install u alternator....you didnt have any problems making the alternator to charge...cuz i have the same style jeep...mine is a 94 but when i got my mechman alty l couldnt make it charge... i have like a black module box tht goes to the back of the stock alty but when i got the mechman alty it came with the plug with two wires..but didnt knw where to hook them up..because the stock alternator only has the one wire charging cable...so i called mechman and he told me to rewire direct to an on off switch 12volts....so i did tht and it charge but my vltage would fluctuate and then sometimes my voltages would be all the way down and stay like tht...and well my friend told me maybe i needed a external regulator...i just want to figure it out because i took the alty off been sitting in my closet for like 4 months now...idk if u can give me some advice wht it could be since i see u have two alty and an external regulator and its a jeep lol... would appreciate it

In your case your best bet would be to run an ext regulator and bypass the truck factory regulator all together. I'm very glad I did this on my truck. The black plug you are talking about does not get used. I'll PM you in a few...

Millertime1028
01-05-2011, 11:51 PM
Just a few new updates.
http://i55.tinypic.com/2vsm07k.jpg
http://i55.tinypic.com/30ni5pe.jpg
Getting ready to remove transistor for 16.5v operation.
http://i54.tinypic.com/ws5lee.jpg

joe14
01-06-2011, 03:04 PM
ok thnk man i would really appreciate it

joe14
01-06-2011, 03:07 PM
In your case your best bet would be to run an ext regulator and bypass the truck factory regulator all together. I'm very glad I did this on my truck. The black plug you are talking about does not get used. I'll PM you in a few...


thnks man i would really appreciate it..i guess i am better off with a regulator...ummm do u think i would have to send the alty in the get a regulator modd to fit the alty

LDW3RD
01-07-2011, 08:59 PM
Nice stuff.

Millertime1028
01-11-2011, 11:45 PM
Little change of plans. What can these be :idea:

http://i52.tinypic.com/152z7s2.jpg
http://i54.tinypic.com/1tnfoo.jpg

p3bumpin
01-12-2011, 12:13 AM
Little change of plans. What can these be :idea:

http://i52.tinypic.com/152z7s2.jpg
http://i54.tinypic.com/1tnfoo.jpg

neos?

1rockford1
01-12-2011, 12:21 AM
hmmmmzz

Millertime1028
01-12-2011, 01:05 AM
http://i54.tinypic.com/25qra1d.jpg
http://i55.tinypic.com/szdeyq.jpg
http://i55.tinypic.com/975qvt.jpg

More Pics to Come! and good guess P3bump

1rockford1
01-12-2011, 01:07 AM
nice

LDW3RD
01-12-2011, 04:12 AM
Skeet skeet!! :drool:

Litunerkid
01-12-2011, 01:33 PM
Holy **** Keith lol.Those are f Ucking ****~!!The carbon fiber caps are ballin

Millertime1028
01-13-2011, 02:29 AM
Thanks for the comments guys! Should have them hooked within a few days, letting them soften up a a little and then the testing shall commence! Will be doing a direct comparising against the last (4) different models/brands of subs that I have used and tested in the same box, on the same power.

jdmferio13
01-13-2011, 02:01 PM
you selling the xl's

boom24
01-13-2011, 05:51 PM
what brand subs are those?

blazron22z
01-13-2011, 06:19 PM
there the DC neos

jbizzle
01-13-2011, 06:26 PM
Those subs would be great with my 2 4500s ;)

Millertime1028
01-13-2011, 08:17 PM
you selling the xl's
Going to hold on to them for alittle while.

Those subs would be great with my 2 4500s ;)
Don't make me call you up and work out a deal lol....


--------------------------------------


Some more pics before they go into the box..These are utilizing the new cones and surrounds.

http://i52.tinypic.com/2vijvrn.jpg
...
http://i55.tinypic.com/2ljs2et.jpg
...
http://i56.tinypic.com/2dj124l.jpg
...
http://i55.tinypic.com/drdmrt.jpg

jbizzle
01-13-2011, 08:21 PM
Call me, if not they're going back to Sundown. You're basically getting them HALF OFF so you better get them.

Millertime1028
01-19-2011, 12:22 AM
Stickered em up. Metallic silver...Time to throw some power at them.

http://i54.tinypic.com/sww95s.jpg
...
http://i52.tinypic.com/2j2tfg2.jpg

Toone
01-19-2011, 12:29 AM
Shouldnt this be called an 8k build seeing as those amps do 8k? :just sayin:

Millertime1028
01-19-2011, 12:33 AM
:) ... Pretty sure the amp is called an AQ 20k. I have clamped this with results upwards of 14k. Take into consideration the amp is running in 16.5v setup at .5 ohms. Also, this amp does well above 8k. Many clamp tests have been done on this which yeilded well above 10k with high imp rise and low input voltage. Will be doing some tests with a CS k12 soon so we shall see how the two amplifiers compare.

Toone
01-19-2011, 12:36 AM
Pretty sure the amp is called an AQ 20k. I have clamped this with results upwards of 14k. Take into consideration the amp is running in 16.5v setup at .5 ohms.

So dynamic power means something now? I didnt look into the build enough to see you were running at 16.5v and .5 but it still should be called a 14k build :p

mazdakid
01-19-2011, 12:37 AM
the name of the amp isnt aq 8k, or aq 14k. Why would he name it either of those? He didnt say its a 20,000 watt build

Millertime1028
01-19-2011, 12:38 AM
So dynamic power means something now? I didnt look into the build enough to see you were running at 16.5v and .5 but it still should be called a 14k build :p

lol

Toone
01-19-2011, 12:38 AM
the name of the amp isnt aq 8k, or aq 14k. Why would he name it either of those?
Because thats how much power hes running? I mean shits not too hard to figure out.

Millertime1028
01-19-2011, 12:39 AM
the name of the amp isnt aq 8k, or aq 14k. Why would he name it either of those? He didnt say its a 20,000 watt build

Thanks mang :)

Millertime1028
01-19-2011, 12:39 AM
double post ftl

Litunerkid
01-24-2011, 05:39 PM
Can we say 158+ on the tl :) ! WOOOT Woot on the metering lol.call me when u see this

kingkongjr
03-23-2011, 03:22 PM
anything new with this beast?

The509
03-27-2011, 06:57 PM
Even though this post is kinda old I'd like to see some full pictures of this.
The car looks ****** man :).

Millertime1028
03-30-2011, 07:21 PM
Been very busy with other things lately and have not had much time to rebuild..... But now it is time :) Will be starting an updated thread within the next week or so as I gather some more equipment .

x91evo
07-07-2011, 04:01 PM
yoo sorry if I missed it, but what suspension do you have holding all that weight up?

blackxj
11-10-2011, 02:26 AM
^stock jeep leafs with 2'' aal's, from what i remember

The_Grimy_One
11-10-2011, 02:32 AM
That box has some of the biggest aero ports I have ever seen! Sick build!