View Full Version : I have an 04 honda accord lx 4 door sedan. I want to put a double din in lower cubby

05-04-2010, 11:30 AM
My first idea was to take one of the single din kits and cut the hole so that it will be long enough to fit a double din. The problem with that is the bottom of this kit would be realllly flimzy and probably look like **** once i cut it out.

Ive been reading up on it, and a few people have done it with the oem 6 cd changer kit. The problem with that is, I dont want the 6 cd changer, just the kit, and it would cost me an arm and a leg to get it just to throw the little bastard away. :(

So my new idea is to try and use the original oem cubby hole with the flip down cover and try and fabricate my own kit inside of it. (fiberglass possibly?)

This would be my first fiberglass application, Im kind of nervous to mess it up.

Has anyone accomplished this? The cubby seems like it would be a tight fit. I think after i do this, it will look really clean, but its gonna take some work.

I would appreciate the help.

05-04-2010, 11:33 AM
The inside of the cubby is around 6 inches wide, 5 1/4 tall, and 5 1/2 deep.

That being measured, i doubt a double din will even fit inside. Maybe it i cut the back off and open it up?

05-04-2010, 11:37 AM
pics would help.

05-04-2010, 11:39 AM

thats the factory one for the cd changer

05-04-2010, 11:40 AM
my cameras down so im trying to find pics from net lol

05-04-2010, 11:51 AM
It looks like it will fit with minor mods

05-04-2010, 11:52 AM
I'd go this route if it was my car....

Honda Accord 03-07 Double Din Radio Kit & Harness - eBay (item 380212217391 end time Jun-02-10 06:00:34 PDT) (http://cgi.ebay.com/Honda-Accord-03-07-Double-Din-Radio-Kit-Harness-/380212217391?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item58866a062f)

05-04-2010, 11:55 AM
jesus i feel like a ******* that you found that on ebay in like 30 sec and i couldnt find it at all

been searching for one all day

the problem with that is that its 129 dollars

kinda looking to spend less than that