PDA

View Full Version : AQ SDC2.5 12" Build Designs



MONSONwarrior
05-03-2010, 10:41 PM
I am planning on doing a build for an Audioque SDC2.5 12" and was wondering what kinda space other people are running. I was looking at doing a 2.2 cu. ft. vented enclosure tuned to 35 hz. Before sub and port displacement it would be right around 4.1 cubes. I am working on some sketch-up designs that I will post on here when I get time.

Thanks for whatever help I get!

Millertime1028
05-03-2010, 10:47 PM
I've found that with 2.0 cu/ft net yeilded the flattest response from the SDC's. You'll be quite fine at 2.2 cu/ft @ 35hz. That tuning suits them well also

mlstrass
05-04-2010, 01:12 AM
your design will work, could even go 2.5net and tune to 38hz for daily as the SDC's hit the lows very well...

MONSONwarrior
05-04-2010, 08:29 AM
your design will work, could even go 2.5net and tune to 38hz for daily as the SDC's hit the lows very well...

Okay, thank you. I'm going to play around with designs today and I'll upload some pics of the Sketch-Up's on here when I'm done. :crazy:

MONSONwarrior
05-04-2010, 09:46 AM
Here is the 2.2 cu. ft. design tuned to 35 hz. The dimensions without the second baffle are 36L x 21D x 14H.

The second is the 2.5 cube design I came up with. It's tuned to 38 hz like mistrass stated would be good. The outside dimensions minus the second baffel are 37.5L x 18D x 14H.

MONSONwarrior
05-06-2010, 10:14 AM
Those boxes were way off cause I don't know what I was thinking but I had a very wrong displacement. Here is the final design and I will start next week.

mlstrass
05-08-2010, 12:00 PM
how much port area per net cube? port looks WAY long if doing 16^2 per cube...should be 18" long for 38Hz tuning...

justafifteen
05-08-2010, 12:52 PM
I have my single sdc 15" tuned to 38hz and I love it. gets the lows really well but still has a wide range

MONSONwarrior
05-08-2010, 01:17 PM
The port is 3 wide, 12.5 tall and 23 long. The 12 volt told me that.

RAM_Designs
05-08-2010, 02:56 PM
how much port area per net cube? port looks WAY long if doing 16^2 per cube...should be 18" long for 38Hz tuning...

Depends on the port proportions as well. Skinnier ports need to be longer, and with a 2ft^3 box and a 16"x2" port, 18" long gives you a 42-43hz tune. A 8"x4" port 18" long drops the tuning one cycle. Neither of them really work out to 38hz.