PDA

View Full Version : custom box for sony L1035 10" sub



detroitdiesel
04-28-2010, 09:08 PM
I am building a ported box for a old sony 10" sub rated at 150wrms/600wmax. The box is going to be around 1.3-1.5 cubic feet. My question is, what should i tune it to? The slot port is going to be 1.5"x12", i just have to decide the length. At 1.3 cubic feet, RE enclosure calculator recommend a port length of 25". does this sound right?

detroitdiesel
04-28-2010, 10:42 PM
any Suggestions?

RAM_Designs
04-29-2010, 01:14 AM
That will give you a 37hz tuning, assuming the 1.3ft^3 is after sub and port displacement.

detroitdiesel
04-29-2010, 02:01 AM
will this be a good frequency for my older sony 10"? If not what frequency should i shoot for?

RAM_Designs
04-29-2010, 02:09 AM
I'd go for something around 33-35hz.