PDA

View Full Version : Help with modifying improving a existing sub design.



Hevychevyjeff
04-25-2010, 04:21 PM
Here it is
http://i496.photobucket.com/albums/rr328/hevychevyjeff/caprice_trunk_box.jpg
How do I figure out the cubic feet on this, it has to many angles I don't know how to do this. I can do a rectangle, but this?
I'd like to add slot ports, how do I figure that out on this box. 30-32 htz.
I'd like to maybe exit the subs, and ports at the top. I have enough room to add 3 inches to the top of the box also. I'm looking for 2 cubes per side 4 total if the depth has to come out thats fine.
The width has to stay the same, and I have 3 inches to play with on the height, and what ever on the front depth. the rear depth 3 inches could be added also.
As it is what's its cubic feet sealed ?
what size would the slots ports need to be?
Is there a formula to figure out port size to hz?
I'm looking to put 12's in there
any help would be greatly appreciated.
Thanks, Jeff

Hevychevyjeff
04-25-2010, 04:25 PM
they have slot ports drawn but no dimensions, or tuning info.