PDA

View Full Version : Anyone want to check my math?



97srad750
04-15-2010, 07:01 PM
I'm building a box for 2 13W1 for my Durango behind the third row seating. I want to make sure I have the cuts correct

Box is 33" wide x 13" deep x 16" High

Cutlist based on 5/8" MDF (3/4" would be better but I already had this sheet)
2 pcs 33" x 16" front and back of box
2 pcs 33" x 13" top and bottom
2 pcs 14 3/4" x 13" sides

Thanks

97srad750
04-15-2010, 10:41 PM
Somebody, anybody

*SlappinAzz*
04-15-2010, 10:47 PM
3/4 mdf

streetbeater07
04-15-2010, 10:48 PM
33x16 front & back = fail..

97srad750
04-15-2010, 10:48 PM
I have 5/8"

97srad750
04-15-2010, 10:49 PM
33x16 front & back = fail..

How so

streetbeater07
04-15-2010, 10:50 PM
you have to subtract an 1 1/4 from the front and back height wise to get 16 height otherwise you're looking at 17 1/4.

streetbeater07
04-15-2010, 10:52 PM
also 14 3/4 x 11 3/4 = 16 x 13 after top, bottom, front, & back are added

97srad750
04-15-2010, 10:53 PM
you have to subtract an 1 1/4 from the front and back height wise to get 16 height otherwise you're looking at 17 1/4.

With the dimensions I had top and bottom pieces and the sides should make a 33" x 16" box. And then you'd put the front and back on and cut the holes.

streetbeater07
04-15-2010, 10:54 PM
33 x 13 is right on top & bottom

streetbeater07
04-15-2010, 10:58 PM
top and bottom should be the last pieces to go on.

streetbeater07
04-15-2010, 11:01 PM
if you do it your way, the depth of the box will still come out to 33 x 14.25

97srad750
04-15-2010, 11:01 PM
top and bottom should be the last pieces to go on.

I gotcha. I figured it with the front and back being the last pieces

streetbeater07
04-15-2010, 11:18 PM
so, your cutout sheet should look like this:

(2) 33 x 13 (top & bottom)
(2) 33 x14.75 (front & back)
(2) 14.75 x 11.75 (l & r sides)

jdawg
04-15-2010, 11:33 PM
I would just list max dimensions and let someone do it for ya

streetbeater07
04-15-2010, 11:36 PM
I would just list max dimensions and let someone do it for ya

i just gave him all the info he needs

97srad750
04-18-2010, 09:57 PM
top and bottom should be the last pieces to go on.

Thank you by the way. I got it done. I went ahead and got 3/4" MDF and adjusted the dimensions.