PDA

View Full Version : dd 1508 box help



IbSlamn
04-07-2010, 10:21 PM
just wondering if anybody has any expierence with them. i jus bought one and got a little 300.1 kicker just for a little sound. should i go by dd specs on the box or wat?

modskwod
04-07-2010, 10:23 PM
I had an AQ SD8 (very similar to the DD, smaller motor w/lower power handling) and it liked the .8 cube box tuned to ~37 hz.
.8 after all displacements btw.

Sancho86
04-08-2010, 12:37 PM
0.8 would work just fine for one 1508 tuned somewhere in the 37-40 range

RAM_Designs
04-08-2010, 07:36 PM
I'd go with a slightly bigger box since you're not working with a lot of power...1ft^3 at 36-37hz seems about right.

IbSlamn
04-10-2010, 02:44 AM
i built one yesterday. 1.4 cubes @ 38 hz and it gets nasty for an 8" on 300rms

Tw1st3d13
04-10-2010, 02:46 AM
i built one yesterday. 1.4 cubes @ 38 hz and it gets nasty for an 8" on 300rms

Video Please

gunz4me2
04-10-2010, 03:02 AM
I'm actually running the junkyard special with mine in a 1.0 cubic foot enclosure tuned to 35 Hz that was originally designed for a 10. I keep saying I am going to build the proper enclosure, but this one has been working out great for me:

http://i24.photobucket.com/albums/c42/gunz4me2/Civic_system_revamp/1508_hack_job.jpg

Edit: It is powered by a 25 to Life Punch 150 that is good for 930 watts RMS @ 4 ohms.

IbSlamn
04-15-2010, 07:50 PM
http://i278.photobucket.com/albums/kk81/IbSlamn/th_100_7300.jpg (http://s278.photobucket.com/albums/kk81/IbSlamn/?action=view&current=100_7300.flv)

Fuknmovin
04-16-2010, 10:28 AM
Hey for what its worth you can actually fit a nice box behind the seats in back, I got mine in there a single 10 and it SLAMS, flexes the roof like an inch!

http://caraudio.com/forum/enclosure-design-construction-help/468574-fixed-image-need-advise-please.html