PDA

View Full Version : Need a simple box blueprint made.



lil azn 06
04-05-2010, 06:31 PM
The subwoofer is a newer Diamond D1 10inch and i am looking to make a ported box for it. I am working with 35 inches wide, 12 inches height, and 16 inches depth. I prefer the box to be more wide if possible taking less depth (like around 10 inches depth if possible, subwoofer is 5 inches depth plus 1.5in for the vent hole i am assuming)

I got like 6-7 bucks in paypal if someone wants it as well for the plan lol.

Thanks.

themgators511
04-05-2010, 06:35 PM
What would you like it tuned to?

Bumpin' Goalie
04-05-2010, 06:42 PM
Preference for compact/efficient?

lil azn 06
04-05-2010, 06:55 PM
35 Hz please.

Well i figure the box should be rather small anyways since it is a 10 inch subwoofer. I believe the D1 manual states 1 CF.

customsoundz
04-12-2010, 08:59 AM
Contact Diamond! Ive been running a D612.2 in their spec box design that i had to build and its loud!

Fuknmovin
04-13-2010, 12:41 PM
Did you ever get help with this? I can design it for you if not, I have done a ton of designs and builds with good success. I would recommend if you want it to play nice and deep to go a bit larger than the recommended size unless you plan on trying to kill it with more power than its designed for...