PDA

View Full Version : Gluing Port to Box



undeadxsunshine
03-29-2010, 09:10 PM
I used pvc cement to glue my pieces of port together. What type of glue should I use to attach the port to the mdf box? The pvc cement again or wood glue or something else?

marcotheclepto
03-29-2010, 09:34 PM
what kinda port...? (material) if mdf use titebond II wood glue good stuff.

Plottin4success
03-29-2010, 10:01 PM
Its an aero. I would just use screws and some silicone around the inside if it to seal it up.

undeadxsunshine
03-29-2010, 10:05 PM
port is plastic made by precision port

undeadxsunshine
03-29-2010, 10:06 PM
eh didn't really wanna use screws, i think it'll look a lot cleaner without them.

phemps
03-29-2010, 10:29 PM
I dont know i stick to slot port but im thinking your not going to be able to get the hold you want being the port is plastic and box mdf. i think your gonna have to go with the screws and silicone as mentioned

soundstreamer
03-29-2010, 10:31 PM
If you use silicone, the port will be removable for use in another box at a later date. Titebond II might not let it go without damage.

RAM_Designs
03-29-2010, 11:12 PM
Or use some skinny weatherstripping from Home Depot...that's what I use for my subs that don't have a rubber gasket.