PDA

View Full Version : Box Build For 06Titan



DonH
03-29-2010, 10:07 PM
in the words of Wiz Khalifa "OKAAAAAY" here is a nice fun little build for a local guy sn is 06Titan. Box will be a ported, under seat box, forward firing for two 10" custom OEM subs from ssackett.


2.5ft^3 @ 33hz
http://i368.photobucket.com/albums/oo125/don_hampton90/design.png

stay tuned more to come tom. put on hold as i have to run to the doctors to get a cut checked out :furious:

edit: ok got ALLLLLLLL the cuts done today. switched up the design a bit. it will now have a straight face instead of that bump inward to gain more cubic feet.

52 degree cut o_0
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4697.jpg

lil miter jig i made real quick to make accurate cuts
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4696.jpg

what the front will look like except for the middle hump cutout not done yet. not assembled
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4698.jpg

1 of two identical pieces. this is the bottom leading to the middle hump
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4699.jpg

will try to finish up ton. as i have the whole day. had class today

Blove1991
03-29-2010, 10:27 PM
Nice, what kind of power are we going to have on tap?

DonH
03-29-2010, 10:29 PM
the subs will be pushed by a aq 2200. in the design the double baffle is not shown aswell as an internal brace in the middle

Ray21
03-29-2010, 10:38 PM
Sweet. Does that require a seat lift at all?

DonH
03-29-2010, 10:53 PM
Sweet. Does that require a seat lift at all?

yeah it did. contact him for more info on how high etc.

ThumpinTitan
03-29-2010, 10:55 PM
If all goes well one day you'll build me a box too lol

06Titan
03-29-2010, 11:41 PM
**** drawing man! I am excited and can't wait to pick it up.

Cali_Screw
03-29-2010, 11:43 PM
gonna be bad ***

James Bang
03-30-2010, 12:22 AM
looks like a pta to build.

DonH
03-30-2010, 12:42 AM
If all goes well one day you'll build me a box too lol

sweet u can get my celly from 06titan if u want


**** drawing man! I am excited and can't wait to pick it up.

will be sexyness :)


gonna be bad ***

indeeeeeed


looks like a pta to build.

hah i know lol. always fun. gotta make a couple jigs to flush trim **** but meh w/e always fun

supermaxx123
03-30-2010, 01:17 AM
looks like a lot of cuts, wanna see the final product:)

ThumpinTitan
03-31-2010, 12:27 AM
sweet u can get my celly from 06titan if u want

yeah, ill probably do that... just gotta build up a lil more funds :)

Cali_Screw
03-31-2010, 04:20 AM
More pics!

Plottin4success
03-31-2010, 04:58 AM
That should get decently loud to tthe ear. I have one of the OEM 12's from ssackett and it pounded pretty good off of only 320wrms in my truck. I'm still waiting on my DSC2000 to come in to really wail on this thing. lol


Nice box man.

06Titan
03-31-2010, 01:37 PM
After the installation is done on my truck, I will be posting a full build log in another thread in this section. Stay tuned if you want to see what I have done with the truck. :)

Wkbdkid
03-31-2010, 01:51 PM
Nice looking box. I jus bought an 06 titan as well. Real curious how this turns out. You raise the seat 2"

06Titan
03-31-2010, 03:28 PM
Nice looking box. I jus bought an 06 titan as well. Real curious how this turns out. You raise the seat 2"

Yeah, pretty much. I put 5/8" MDF square blocks where the rubber squares are by the seat latches. The seat won't latch anymore, but I don't care. You could always add 1/2" so they can latch.

Here are two pictures of the carpet I picked up. It's an almost identical match, the flash lightens the floor a bit.
http://i150.photobucket.com/albums/s96/warp09/Audio%20Rehab/IMG00106-20100330-1907.jpg
http://i150.photobucket.com/albums/s96/warp09/Audio%20Rehab/IMG00105-20100330-1907.jpg

DonH
03-31-2010, 08:31 PM
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4701.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4702.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4703.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4704.jpg

test fit
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4705.jpg

where ports will be
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4706.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4707.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4708.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4709.jpg

DonH
03-31-2010, 08:31 PM
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4713.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4715.jpg

Cali_Screw
03-31-2010, 08:38 PM
Looking real good!

JL Audio
03-31-2010, 10:04 PM
ssackett never responds to any of my PMs.. blah, tried to run his woofers numerous times but no luck so I gave up, all his woofers i've seen look insane though.

tc3k101
04-01-2010, 01:10 AM
ssackett never responds to any of my PMs.. blah, tried to run his woofers numerous times but no luck so I gave up, all his woofers i've seen look insane though.

Shoot me a pm with what you are looking for, Scott doesn't respond to any of his messages haha. Email is best way or through me haha.

And who is building these subs hrmmmmm...

Looking good Don I'll stop by sometime and check it out. Maybe when you stock up on some tea mofo

sacking74
04-01-2010, 01:15 AM
looks good bro!

Blove1991
04-01-2010, 01:57 AM
ssackett never responds to any of my PMs.. blah, tried to run his woofers numerous times but no luck so I gave up, all his woofers i've seen look insane though.

Yeah, I get same day responses through e-mail.

[email protected] IIRC.

supermaxx123
04-01-2010, 02:01 AM
while your there cut out an mdf ring... i need one lol. box looks good btw.

06Titan
04-01-2010, 02:32 AM
Box looking sweet man!

ThumpinTitan
04-01-2010, 05:56 PM
coming together quite nice!

DonH
04-01-2010, 08:48 PM
while your there cut out an mdf ring... i need one lol. box looks good btw.

what u need? ask 06Titan how many circles i have to make cutouts lol

jasonjs
04-01-2010, 08:51 PM
Nice ima hit you up for a box later

DonH
04-01-2010, 08:52 PM
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4716.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4719.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4720.jpg

before roundover
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4721.jpg

carpet almost done :) have ish to do will get back at it later in the pm
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4722.jpg
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4722.jpg

Doola36
04-02-2010, 12:05 AM
Great job bro!!!!!!!! Looks really good. I may need you to make me a box.......:)

supermaxx123
04-02-2010, 04:37 AM
what u need? ask 06Titan how many circles i have to make cutouts lol

It's for an 8" sub. i havent measured it but i know OD would be 8" maybe a little under that. I'm not sure about ID. I'll measure it tomorrow, if it's not too much trouble. I am planning on buying a jig soon, just need to get paid then i place the order ha.

Cali_Screw
04-02-2010, 04:43 AM
i cant wait to do mine!

06Titan
04-02-2010, 01:30 PM
Looking forward to picking this baby up today!

DonH
04-02-2010, 03:44 PM
It's for an 8" sub. i havent measured it but i know OD would be 8" maybe a little under that. I'm not sure about ID. I'll measure it tomorrow, if it's not too much trouble. I am planning on buying a jig soon, just need to get paid then i place the order ha.

lmk dude. i have a jig and cutouts. buy me lunch and ur good to go. will take bout 5 mins tops. can even do flushmount ring if you want. but thats lunch and a black and white arizona iced tea! lmfao


i cant wait to do mine!

indeed. indeed.


Looking forward to picking this baby up today!

he arrived, he saw, he loved the box! hahaha here are pics ppl:
all done :)
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4724.jpg

shows the roundover on the side with the carpet
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4726.jpg

clean *** fit!
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4727.jpg

perty
http://i368.photobucket.com/albums/oo125/don_hampton90/100_4728.jpg

first titan box down many more to come im sure lol

jasonjs
04-02-2010, 03:50 PM
came out clean NICE WORK gotta get some videos with subs in

Ray21
04-02-2010, 04:26 PM
Nicely done!! Looks great.

06Titan
04-02-2010, 04:36 PM
Love the box. This is good quality work guys. Glad i went with Don to build it.

06Titan
04-02-2010, 04:37 PM
came out clean NICE WORK gotta get some videos with subs in

Those should be in by next week. Amp comes in tonight, subs next week.

Wkbdkid
04-02-2010, 06:18 PM
Box looks sweet. Is it jus me or does it seem like the back seat is crazy high in the front?

supermaxx123
04-02-2010, 10:57 PM
lmk dude. i have a jig and cutouts. buy me lunch and ur good to go. will take bout 5 mins tops. can even do flushmount ring if you want. but thats lunch and a black and white arizona iced tea! lmfao

well i measured, OD is 8" ID is 7 5/8"
Let me know what you want for lunch! lol

DonH
04-03-2010, 02:45 AM
well i measured, OD is 8" ID is 7 5/8"
Let me know what you want for lunch! lol

arbys, chicken bacon swiss. extra large with them curly fries! **** loads of arby's sauce and a pepsi to go with that. serious business. how does monday sound? hah!

CranberryYumYum
04-03-2010, 09:26 AM
arbys, chicken bacon swiss. extra large with them curly fries! **** loads of arby's sauce and a pepsi to go with that. serious business. how does monday sound? hah!

i fuckin love arby's sauce

Mookie
04-03-2010, 10:31 AM
Box looks sweet. Is it jus me or does it seem like the back seat is crazy high in the front?

I was going to ask the same thing.

DonH
04-03-2010, 11:58 AM
its from the seat lift. in his truck blocks are added where the seats hindge down. theese blocks increase the angle more the larger the blocks are

06Titan
04-03-2010, 12:14 PM
its from the seat lift. in his truck blocks are added where the seats hindge down. theese blocks increase the angle more the larger the blocks are

Pretty much what he said, lol. I have 5/8" MDF blocks. If I were to remove them, the seat would sit and rest on top of the box.

supermaxx123
04-03-2010, 04:39 PM
arbys, chicken bacon swiss. extra large with them curly fries! **** loads of arby's sauce and a pepsi to go with that. serious business. how does monday sound? hah!

i leave for work at 9:50am everyday, that would mean breakfast and getting up early:(

DonH
04-07-2010, 02:15 AM
i leave for work at 9:50am everyday, that would mean breakfast and getting up early:(

well lmk when g