PDA

View Full Version : vent tuning help



evanirr
03-28-2010, 07:22 PM
ok i have a 10 cubic foot box, the vent length is 20 inches, 40 inches wide, with a 2 inch opening, i need to know what it is tuned to, can anyone help?

evanirr
03-28-2010, 07:55 PM
someone please help!!

ahole-ic
03-28-2010, 08:04 PM
if what you said is 100% true and your sub displacement were 0 then it would be around 30-31 hz. It will probably be more like 32hz when you mount your subs.

evanirr
03-28-2010, 08:11 PM
yea thats the dimensions, so its going to be a little low for my subs then.

RAM_Designs
03-28-2010, 08:24 PM
Is the 10ft^3 before or after port displacement?

Oh, and your port is way too skinny. I'd recommend building a new box.

evanirr
03-28-2010, 08:34 PM
it is after

RAM_Designs
03-28-2010, 08:40 PM
it is after

So it's tuned right around 28hz before you put the subs in, which would still leave you at 29-30hz after sub displacement, which is too low for those DD's. I'd scrap the box myself. It's too big and tuned too low, and the port is entirely too skinny. Shoot for 8.5ft^3 tuned to 35-38hz, depending on your tastes, and keep the port opening ratio lower than 1:8.

evanirr
03-28-2010, 08:45 PM
hmm ok, got any designs you could post up here???

RAM_Designs
03-28-2010, 09:27 PM
My designs aren't free and without knowing your vehicle and the dimensions you have to work with I can't do anything anyways.

Buck
03-29-2010, 12:38 PM
evanirr you have a PM