PDA

View Full Version : Need Help Designing TC Sounds 5200 Enclosure



Jybfan04
03-23-2010, 11:32 AM
Whats the recommended box size and tuning for a 5200 ported enclosure?

ciaonzo
03-23-2010, 12:35 PM
Here, let me do the footwork for you.

TC Sounds (TC-5200) (http://web.archive.org/web/20070518053722/www.tcsounds.com/tc5200.htm)

Jybfan04
03-23-2010, 02:13 PM
Here, let me do the footwork for you.

TC Sounds (TC-5200) (http://web.archive.org/web/20070518053722/www.tcsounds.com/tc5200.htm)

Thanks, I pulled up an old archive but the one I looked I didn't see the listings for the large enclosure only the small 2 cu ft one..

I appreciate the help...

What have you ran personally?

BumpinKota
03-23-2010, 04:40 PM
What size 5200?

Jybfan04
03-23-2010, 05:11 PM
I guess that would help lol 15" i'm getting a recone from Teampsi/Fixmyspeaker.com

BumpinKota
03-23-2010, 06:15 PM
**** my one buddy i know had 2x 18's i could have asked him what size box he was using. If i recall is was ~6 cubes per speaker.. Im sure about 3.5 cube would be good for a 15 just make sure you factor in that big *** magnet for displacement. It really depends what you want to do Spl or just daily slamming. Big box tuned lower will sound loud. Smaller box tuned high will give you more spl. Aero ports work very nice with these drivers also iv tested aero's and slots with my revos and my aeroport box was louder on the tl.

tc3k101
03-23-2010, 06:17 PM
I guess that would help lol 15" i'm getting a recone from Teampsi/Fixmyspeaker.com

If you are having David recone it I suggest letting him break it in and pull the parameters. For all you know the tsp's will not be the same and the proper enclosure might not be the same as the original tc drivers.

ciaonzo
03-23-2010, 08:42 PM
If you are having David recone it I suggest letting him break it in and pull the parameters. For all you know the tsp's will not be the same and the proper enclosure might not be the same as the original tc drivers.
Indeed.

This thread is useless without that information.