PDA

View Full Version : Sundown Sa12 box build



302yota
02-28-2010, 10:36 PM
i will start building a box for a sundown sa12 tomorrow and i wanted to show everyone the design before i started, just incase there is something wrong with it, that may cause some output loss....the design comes out to be 2cubes at 30hz before sub and brace displacement....and will be going in the trunk of a mustang firing into the cabin..(port on driver side)

26516805

302yota
03-01-2010, 04:26 PM
well i'm about to begin building the box....so i guess the design will have to work, i was just a little curious as to where the sub cutout should be....so i placed it as far from the port opening as possible

DS Autosports
03-06-2010, 12:48 AM
go for it, the design looks good and the placement of the sub is fine...I finished my box and it's loud, but it needs to be tuned lower. My poor honda is rattling apart, can't wait to put the full 1400wrms to it on sunday...

302yota
03-06-2010, 01:53 AM
yeah...i just got it built and hooked up, and it's a lot louder than i imagined....i'll post some pics tomorrow of the build