PDA

View Full Version : Need enclosure design, for 2 10" subs



kawana
02-27-2010, 01:54 PM
I need some blueprints for an enclosure built to these specs:

2 10" subs
The recommended enclosure specs for 1 of these subs is: 1.25 cu.ft. @ 28-33hz
Id like to make it into 2 seperate enclosures, and have each of them port through the top, with a round port. The idea is that im going to remove the rear speakers, and port through the openings. So the enclosures should be 15.5" tall by 18" wide (outside dimentions, not inside, (assuming im using 3/4" MDF)) and as deep as is needed to meet the cu.ft. Something like this (pardon my crude paint drawing)

http://i4.photobucket.com/albums/y110/kawana/subbox.jpg

The round ports will go through the old speaker openings in the rear parcel shelf.

Im willing to pay a couple of bucks for your troubles, if needed.

supermaxx123
02-27-2010, 05:21 PM
why 2 seperate enclosures?

kawana
02-27-2010, 07:17 PM
well i suppose it doesn't have to be, just solong as it ports through top.

mobeious
02-27-2010, 07:32 PM
i can help ya out... PM me or get with me on AIM my name is the same on AIM

kawana
02-27-2010, 08:50 PM
PM sent

kawana
02-27-2010, 09:39 PM
Hey, mobeious. Your inbox is full, i cant reply to your pm.