PDA

View Full Version : tunning question



bigmike71
02-18-2010, 06:10 PM
hey guys i have a question. i have a box i built in my 97 accord and i am trying to find out what i have it tuned to. the o.d. is 33x15x28 port is 6.25wx13.5hx19d. i have 2 APX 12s in it slot port on drivers side sealed off from trunk. any help would be appreciated. thanks i almost forgot it has a double front baffle which makes the depth 28

RAM_Designs
02-18-2010, 06:44 PM
6.34ft^3 gross
-.96ft^3 for port
-.4ft^3 for subs
-----------------------
~5ft^3 tuned to ~39hz


Might be a little different if there's bracing taking up some space...I'm also just guessing on the sub displacement, but it should be fairly close. Also, this is assuming the 19" port length is from the back of the port to the face of the double baffle, so only 17.5" of it is taking up space in the box.

bigmike71
02-18-2010, 07:21 PM
thanks man so what would i need to do to make it 41hz. i do have bracing so will that lower tunning

RAM_Designs
02-18-2010, 08:18 PM
It'll raise the tuning a little. Taking away air space raises tuning given that the port stays the same.