PDA

View Full Version : Connersdad19's 01 Blazer



connersdad19
02-08-2010, 09:53 PM
SYSTEM CONSISTS OF:

Alternator: SAAB 9-7X 200AMP Alternator fits a bunch of different vehicles.

Battery: Deka Intimidator 9A78DT (Under the Hood)

Battery Terminals: Tsunami Side mount posts

Voltage Meter: STINGER SVMB BLUE

Power Wire: KLMX Kable 1/0 Metallic Blue Power/Ground (50 Feet) Knukonceptz and KLMX 4 Gauge.

Fuse & Fuse Block: 2 0 Gauge Install Bay Fuse holders with Fuses

Head unit: Sony CDX-GT710 ( I have had this for years and is a great unit)

Ipod Classic Black 120gb

Rca’s: eKo 5 Meter RCA Cable (x2) Knukonceptz

Speaker Wire: Klear Kable Blue 16 Gauge Speaker Wire (50 Ft.) Knukonceptz

Speakers: 4 Pioneer 6.5s

Speakers Amp: Audiopipe AP-2002

Subwoofers: Anything that can handle the sub amp.

Subwoofers Amp: Audiopipe AP-3001D (in the future)

Rear Battery: Deka Intimidator Battery - 9A31 (in the future)

PICTURES WILL BE UP AS SOON AS EVERYTHING ARRIVES......I KNOW ITS NOT MUCH BUT THIS WILL BE BETTER THAN MY FIRST SYSTEM FOR SURE.

connersdad19
02-09-2010, 02:29 PM
So far today i have received my battery, power wire, speaker wire, and rca's onto the pictures.....

http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/1.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/2.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/3.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/4.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/5.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/6.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/7.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/8.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/9.jpg

connersdad19
02-09-2010, 09:47 PM
does anyone know where i can get a good alternator without spend an arm and a leg? mine has just crapped out on me.

mbrooky
02-09-2010, 10:14 PM
does anyone know where i can get a good alternator without spend an arm and a leg? mine has just crapped out on me.

How To: High Output AD244 Alternator for ~$80 - S-10 Forum (http://www.s10forum.com/forum/f27/how-to-high-output-ad244-alternator-for-80-a-376788/)

For those of you with H.O. Alternators.... - S-10 Forum (http://www.s10forum.com/forum/f27/for-those-of-you-with-h-o-alternators-365674/)

connersdad19
02-09-2010, 10:32 PM
thanks. now i just need to read through all of it and see if it gives models of cars that it came on.

rival904
02-09-2010, 10:45 PM
hope you enjoy those 6.5s ;)

connersdad19
02-09-2010, 10:58 PM
me to lol.

connersdad19
02-10-2010, 02:40 PM
I just had to order a 4 gauge amp kit from knukonceptz i thought i could get by using my 0 gauge with some 4 gauge reducers but did not know that the amp was set up this way...no biggie...onto the pics

http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/10.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/11.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/12.jpg

has a fan for this little amp
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/13.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/14.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/15.jpg

here is a picture to show that it will be able to breath...
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/16.jpg

connersdad19
02-12-2010, 09:43 PM
Got my mids, alternator, voltmeter, and fuse holders in today.....

http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/17.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/18.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/19.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/20.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/21.jpg

I have to get rid of the powerbass's as they don't fit i had to go out and buy some shallow mount pioneers...no biggie...

connersdad19
02-12-2010, 09:45 PM
here are the fuse holders ^^^^^^^^^^^

lilkman2202
02-12-2010, 09:49 PM
good start cant wait to see it all done

pressnic38
02-12-2010, 09:53 PM
How much were the components?

connersdad19
02-12-2010, 10:05 PM
they are just mids and i paid 150 for all 4

i want to deaden but i cant as its only like 17 degrees and i have no garage just an apartment parking lot

connersdad19
02-13-2010, 02:21 PM
just my **** luck the powerbass speakers are to deep and dont fit so now i have to try to find some shollow speakers...

rival904
02-13-2010, 02:37 PM
Make some MDF rings?

If you dont have a jasper jig I can make some for you for cheap outta 1/2in MDF.

connersdad19
02-13-2010, 08:39 PM
nope wont work...they stick out like 3/4 to an inch and with the door panel on it wont fit the the way they have this **** setup....i have never had this many problems...i sent you a pm.

on a better note got the alternator on and i can tell a huge difference...so at least something has gone good.

connersdad19
02-15-2010, 12:14 AM
Went out and bought some shallow mount 6.5 inch pioneers for now............got some pics of the alternator....major improvement....now i am working towards getting the power wire ran ( once i find out where its going ), voltmeter, rca's etc....

if anyone knows the answer to this please let me know....Do you have to adjust the voltage on these voltmeters? i remember seeing something briefly on the sheet it came with but my son got a hold of the **** thing and i cant find it.

http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/22.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/23.jpg
http://i26.photobucket.com/albums/c119/connersdad19/2001%20BLAZER/24.jpg

NoPh33rRaCiNg
02-15-2010, 12:43 PM
look good. you can pop off the front part of the volt meter and there is a knob you turn to adjust the voltage, just use a dmm and match it to it. where did you get that deka from and how much was it?

connersdad19
02-15-2010, 01:52 PM
i got the deka from remy...here is the link..

i think with shipping it was around 160.....got one for my wifes impala a while back when i had a system in it so i said why not...great batteries..when i put it in the blazer i just had to cut some of the battery tray away close to the radiator..just used a grinder and it fit perfect...it fits without that but not to my liking.

Deka Intimidator 9A78DT Battery | Absorbed Glass Mat Battery - Remy Battery (http://www.remybattery.com/Products/Deka-Intimidator-AGM-Battery__9A78DT.aspx)

connersdad19
02-16-2010, 07:01 PM
admist all of the snow i was able to get the rcas ran as well as the amp turnons and last but not least i got the voltmeter hooked up....i still need to run the rcas and all of those wires to the back....i got my 250 amp fuses in today as well as my hammer crimper....one question i have though is should i fuse my alternator to battery part of the big 3? i have an extra fuse and holder...just not sure if its worth it? any input?

connersdad19
02-18-2010, 08:08 AM
I cant edit my first post for some reason.....i am going with a kinetik hc1800 in the back.....because i am getting a good deal onit.

connersdad19
02-23-2010, 07:28 PM
got the kinetik hc1800 in yesterday have yet to be able to get out there and put in because of the rain....i still need to get under the blazer and run my wire for pos and neg then hook the battery up. I also still got one more 6.5 to hook up as well as the amp.....