PDA

View Full Version : boom 24s rebuild (again) 4 15s



boom24
02-03-2010, 04:35 PM
so i was suppoista start walling my car but some finacial issues came along and it change the whole build

so whats gunna be in the car
kenwood excelon x-991
14 runs of knu 1/0
2 runs of 4ga knu
rush power systems trippel alt setup...3 300amp alts externaly regulated
4 15in dc audio lvl4xls custom painted and built by me 5 stiif spyders and so on
box will be tuned to 38hrz yes 38 iam building this car to be badd *** on music
i started to matt the car then ran out so i started building my door pods each front door will hold 5 6 1/2s and 5 1inch tweets

here is some pics of the prgress
http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00263.jpg[http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00265.jpghttp://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00273.jpg

boom24
02-03-2010, 04:37 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00271.jpg
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00273.jpg[/img
http://[img]http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00272.jpg

boom24
02-03-2010, 04:38 PM
http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00272.jpg

boom24
02-03-2010, 04:38 PM
http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00271.jpg[/IMG][/IMG]

boom24
02-03-2010, 04:40 PM
wtf it wont let me load pics iam getting really ****ing pissed after they updateted this ****ing forum it blows...ill try this 1 more time

boom24
02-03-2010, 04:49 PM
http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00273.jpg

boom24
02-03-2010, 04:49 PM
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

boom24
02-03-2010, 04:51 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00273.jpghttp://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00276.jpg

hatedonmostly
02-03-2010, 04:56 PM
youre doin it wrong

spltuscon
02-03-2010, 05:18 PM
If your pics are hosted somewhere (like photobucket) just right click on it and click on Copy Image Location, then on here click the picture icon and right click then paste.

Hope that made sense...

boom24
02-03-2010, 05:23 PM
If your pics are hosted somewhere (like photobucket) just right click on it and click on Copy Image Location, then on here click the picture icon and right click then paste.

Hope that made sense...



ill give it a shot ...i called rusty hes gunna get back to me tommarow ...also when u start building can u send me pics as u go???please

boom24
02-03-2010, 05:25 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/img00273.jpg

boom24
02-03-2010, 05:25 PM
wtf it still isnt working wtf

spltuscon
02-03-2010, 05:58 PM
ill give it a shot ...i called rusty hes gunna get back to me tommarow ...also when u start building can u send me pics as u go???please

No problem, I'll keep you updated.

bhsdriller
02-03-2010, 06:02 PM
pics fail

boom24
02-03-2010, 06:02 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00273.jpg

boom24
02-03-2010, 06:03 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00272.jpg

boom24
02-03-2010, 06:03 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00276.jpg

boom24
02-03-2010, 06:04 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00278.jpg

boom24
02-03-2010, 06:04 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00279.jpg

boom24
02-03-2010, 06:04 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00282.jpg

boom24
02-03-2010, 06:05 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00285.jpg

boom24
02-03-2010, 06:05 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00291.jpg

boom24
02-03-2010, 06:05 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00294.jpg

boom24
02-03-2010, 06:06 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00300.jpg

boom24
02-03-2010, 06:06 PM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/IMG00309.jpg

Bobby322
02-03-2010, 06:34 PM
looks sick..hell of alot of wire! Liking the blue basket too. Think you messed up on image tags. its before pic then after

boom24
02-03-2010, 08:58 PM
looks sick..hell of alot of wire! Liking the blue basket too. Think you messed up on image tags. its before pic then after

yea i ****ed it up

Bfat567
02-03-2010, 09:07 PM
Love Jeep builds

boom24
02-04-2010, 02:57 PM
Love Jeep builds

thanks should turnout nice...i hope

Goldtaz1
02-04-2010, 03:36 PM
Can't say anything other than "Nice" about the quality of work being done here. However, I'm trying to figure out why in god's name you are using that many power and ground wires. I would think 2-3 of each would more than sufficiently transfer the current right? Maybe I'm more of a noob than I thought.

Goldtaz1
02-04-2010, 03:36 PM
Can't say anything other than "Nice" about the quality of work being done here. However, I'm trying to figure out why in god's name you are using that many power and ground wires. I would think 2-3 of each would more than sufficiently transfer the current right? Maybe I'm more of a noob than I thought.

kingkon68
02-04-2010, 03:59 PM
I was wondering that myself as well maybe you know something we dont know besides the wire being very expensive:cool: Kudo to you looks clean hope it pounds hard

boom24
02-04-2010, 06:14 PM
Can't say anything other than "Nice" about the quality of work being done here. However, I'm trying to figure out why in god's name you are using that many power and ground wires. I would think 2-3 of each would more than sufficiently transfer the current right? Maybe I'm more of a noob than I thought.


I was wondering that myself as well maybe you know something we dont know besides the wire being very expensive:cool: Kudo to you looks clean hope it pounds hard


well we have done alot of testing with car off (db drag style) and we have proven that the more runs u have the higher ur number is with car off car running we have never seen a dif at all...thats why if u look at alot of the serious db drag guys they can have 36-48 runs....but thair becoms a point were u dont gain anymore...and they way u gain is by a reserve basicly thats the easyest way to explane it u will have a **** ton of power stored in the wire alone...enough some time for a few tenths on the meter

______
02-04-2010, 08:10 PM
well we have done alot of testing with car off (db drag style) and we have proven that the more runs u have the higher ur number is with car off car running we have never seen a dif at all...thats why if u look at alot of the serious db drag guys they can have 36-48 runs....but thair becoms a point were u dont gain anymore...and they way u gain is by a reserve basicly thats the easyest way to explane it u will have a **** ton of power stored in the wire alone...enough some time for a few tenths on the meter

Wow...Good to know

Cant wait to see it finished, what kind of numbers your going for??

boom24
02-04-2010, 09:10 PM
Wow...Good to know

Cant wait to see it finished, what kind of numbers your going for??

depend on amps ...iam hopeing to do 53-55s on music on about 7-8k and the box will peak below 38 hrz:)...hair trick baby:)

NoPh33rRaCiNg
02-05-2010, 01:23 AM
this is gonna be siick when its done

baker08
02-05-2010, 11:54 AM
epic fail!!

TeamElite-Mike
02-05-2010, 04:08 PM
You should post some of the box pics, coming out sick :D :D

boom24
02-07-2010, 07:58 AM
epic fail!!


hey if u dont have something nice to say how about u go **** your self waile i **** your mother...mr i have 11 post and no gear or build to show how about you ****ing **** a **** you homo

boom24
02-07-2010, 08:03 AM
this is gonna be siick when its done

thanks

boom24
02-07-2010, 08:13 AM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/3.jpg

boom24
02-07-2010, 08:14 AM
http://http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/1.jpg

boom24
02-07-2010, 08:15 AM
http://http://i204.photobucket.com/albums/bb19/davef249/5.jpg

boom24
02-07-2010, 08:16 AM
http://http://i204.photobucket.com/albums/bb19/davef249/6.jpg

boom24
02-07-2010, 08:16 AM
http://http://i204.photobucket.com/albums/bb19/davef249/7.jpg

boom24
02-07-2010, 08:17 AM
daves doing a grate job on this everything will be doubled up and the face will be 3 sheets:)

spltuscon
02-07-2010, 08:18 AM
No worries, this build is going to be nuts! You've got killer equipment AND the setup will be great too...big builds just take a while to finish.

spltuscon
02-07-2010, 08:28 AM
Still have lots of work to do on the box, but it'll be very strong and its well planned out to make the best use of his space. I'll try to provide some good in progress pics this week.

boom24
02-07-2010, 08:32 AM
thanks dave ...no worries about the time i just want it done rite...ill call u later

thericanballer
02-07-2010, 03:19 PM
beastly

RWAUDIO
02-07-2010, 03:21 PM
Dam everything looks really good.
Can't wait to see it finished.

boom24
02-07-2010, 04:24 PM
Dam everything looks really good.
Can't wait to see it finished.

thanks...hope we can make a deal on some amps soon thanks man

kingkon68
02-08-2010, 11:26 AM
Hey boom kon68 here nice box did you make those braces your self real tight dude real tight question? why not double the baffle?

Annnarbor84
02-08-2010, 12:27 PM
Looks great!!

spltuscon
02-08-2010, 06:38 PM
Hey boom kon68 here nice box did you make those braces your self real tight dude real tight question? why not double the baffle?

I'm building the box for him (The Box Guy). The entire box will be doubled and the top baffle will actually be tripled :) Subs will sit inverted (magnet out) and be recessed into the top baffle.

Here is a pic of the port in progress...

http://c2.ac-images.myspacecdn.com/images02/145/l_f7351b78f2fb4c7a8c7deccd5da2bd85.jpg

boom24
02-08-2010, 06:46 PM
[QUOTE=spltuscon;6955608]I'm building the box for him (The Box Guy). The entire box will be doubled and the top baffle will actually be tripled :) Subs will sit inverted (magnet out) and be recessed into the top baffle.

thanks for the update dave

SAZCLASSD
02-09-2010, 12:07 AM
build looks good.....quick question tho. you think port facing up will be louder than port facing the hatch?? I know I tested both setups in my truck when I had 4 15s and the port aimed toward the rear was louder.....I kno the air space in your vehicles is about the same, but every vehicle is different. I am jus curious

spltuscon
02-09-2010, 04:43 AM
My original design was subs up, port back, but Dave (boom24) spoke to 2 knowledgeable SPL competitors that have grand cherokee's themselves and they both told him subs up/ port up was louder...so we changed the design and hopefully it works out well.

boom24
02-09-2010, 06:30 AM
My original design was subs up, port back, but Dave (boom24) spoke to 2 knowledgeable SPL competitors that have grand cherokee's themselves and they both told him subs up/ port up was louder...so we changed the design and hopefully it works out well.

thats dave...and yes that is suposta be the loudest design in my style jeep...also another factor for me is space i cant have a port pack because the box has to be 6 in or so of the hatch and i cant afford to loose the space in the front of the box

SAZCLASSD
02-09-2010, 01:33 PM
o ok sounds good. I was JW

spltuscon
02-09-2010, 01:44 PM
Close up of the port so far

http://c3.ac-images.myspacecdn.com/images02/125/l_5fed26a1d66749c296fba7accfaa41c2.jpg

Inner box complete

http://c1.ac-images.myspacecdn.com/images02/126/l_5319f3580f854b0ab99b9deaf88914f0.jpg

Working on the outer layers now....doing it in a way that the seems will be overlapped to make it stronger.

boom24
02-09-2010, 06:44 PM
thanks dave looking good

kingkon68
02-11-2010, 12:48 AM
daves doing a grate job on this everything will be doubled up and the face will be 3 sheets:)

Boom question I see no sound deadner or I miss it in the pics if so are you planing on sound deadening it my jeep rattle like crazy with three twelve ported and the jeep soaked up most of the bass so bad it sound like crap so I sold the box and subs to a guy in a bigger truck and it sounded so good and loud bass was so deep it play at 27HZ nasty very nasty

kingkon68
02-11-2010, 12:54 AM
Boom Id love to see pics of the door's and how they turned out post some when you get the chance nice build by the way remembergood things comes to those who wait take your time and check and then recheck and then check agan trust trial and error

kingkon68
02-11-2010, 01:06 AM
Hey box guy if I was wearing a hat Id tip it to you love they way you did the port I must say Im learning a lot as I love builds some guys have all the right stuff now Im bummed if you write a book promise I buy it and read it LOL

boom24
02-11-2010, 05:57 AM
Boom question I see no sound deadner or I miss it in the pics if so are you planing on sound deadening it my jeep rattle like crazy with three twelve ported and the jeep soaked up most of the bass so bad it sound like crap so I sold the box and subs to a guy in a bigger truck and it sounded so good and loud bass was so deep it play at 27HZ nasty very nasty


Boom Id love to see pics of the door's and how they turned out post some when you get the chance nice build by the way remembergood things comes to those who wait take your time and check and then recheck and then check agan trust trial and error


Hey box guy if I was wearing a hat Id tip it to you love they way you did the port I must say Im learning a lot as I love builds some guys have all the right stuff now Im bummed if you write a book promise I buy it and read it LOL

thanks for all the kind words,,the deadning isnt finished yet thats the plan for this weekend...also doors arnt done yet i have them put to the side for a rainy day so i can work on them more

Project_dog
02-11-2010, 05:03 PM
Dam, thats going to be one loud system. :veryhapp:

boom24
02-11-2010, 05:03 PM
Dam, thats going to be one loud system. :veryhapp:


thats the plan:)

spltuscon
02-12-2010, 04:13 PM
Box updates...

Everything is double layered, except for the top baffle which is tripled. Port is rounded over with a 1.5" roundover bit and sanded very smooth. All the other edges are rounded over with a 3/8" roundover. I almost killed myself moving this its so heavy:crap:

Pics; Check out this freakin' port...

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs219.snc3/22660_306538752179_285118207179_3386149_783360_n.j pg

http://hphotos-snc3.fbcdn.net/hs239.snc3/22660_306538762179_285118207179_3386150_122575_n.j pg

http://hphotos-snc3.fbcdn.net/hs219.snc3/22660_306538747179_285118207179_3386148_5335947_n. jpg

and I threw my old Orion HCCA on there just to mock up what it'll look like with the subs mounted

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs239.snc3/22660_306538737179_285118207179_3386147_1735740_n. jpg

I can't wait to hear this thing, its gonna be nuts :cool:

1phatclipse
02-12-2010, 09:13 PM
I give you props that is one nice looking box!!!

carguy83
02-12-2010, 11:50 PM
you got some nice enclosure building skills! loving the quality of that box! :)

Annnarbor84
02-13-2010, 01:34 AM
Beautiful box brah....

kingkon68
02-13-2010, 02:48 AM
nice very nice so sweet the sound question why sub down and not up and are you going to paint the box or bedliner?

spltuscon
02-13-2010, 07:55 AM
Thanks for all the compliments!

I think he said he was gonna paint it, and he wanted the subs inverted for the look. The 4XL's have a **** motor and he painted the baskets blue so they look hot.

boom24
02-13-2010, 08:41 AM
Thanks for all the compliments!

I think he said he was gonna paint it, and he wanted the subs inverted for the look. The 4XL's have a **** motor and he painted the baskets blue so they look hot.

dave thanks again...this box is absulutly a peace of art....the pictures dont do it justice what so ever,and yes iam gunna paint the box...and ill post some pics later of the box and subs in my car...gutta do some test fitting today

boom24
02-15-2010, 03:25 PM
http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/106.jpg

test fit

boom24
02-15-2010, 03:28 PM
http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/107.jpg
.
.http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/111.jpg
.
.http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/112.jpg
no clear coat yet

boom24
02-15-2010, 03:34 PM
some pics of the box with 2 coats of clear on it prob do 1 more coat...it looks absultly amazeing in person

http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/119.jpg
.
http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/122.jpg

http://i204.photobucket.com/albums/bb19/davef249/walled%20jeep/127.jpg

TeamElite-Mike
02-15-2010, 03:46 PM
About time you put those up :D

wone
02-15-2010, 04:25 PM
**** bro thats ****

Project_dog
02-15-2010, 04:55 PM
Is that MDF? That's looks beautiful and it's not done yet.

TeamElite-Mike
02-15-2010, 05:29 PM
Yes, mdf with tons of primer, sanding, and painting.

Project_dog
02-15-2010, 06:53 PM
To bad you didn't live a lot closer. I would have you make me a box.

boom24
02-15-2010, 07:25 PM
**** bro thats ****
thanks man there has been alot of work done so far and still alot to go

Is that MDF? That's looks beautiful and it's not done yet.
thanks for the kind words ,iam a total of 8 coats of primer sanded between each,2 coats of color and 2 coats of clear i just hit it 1 more time so iam at 13 coats so far there is textured paint over the base coat and with the clear i can brush my teeth in it...and yes mdf

To bad you didn't live a lot closer. I would have you make me a box.
thair is always shipping :)

Project_dog
02-15-2010, 07:27 PM
Shipping would cost a lot.

boom24
02-15-2010, 07:29 PM
fraite..100-150 tops

Project_dog
02-15-2010, 07:37 PM
You mean Freight? J?K

Then the box would be 100-150 for one, where I need two. So 500 for two sub boxes.. OUCH

spltuscon
02-15-2010, 07:45 PM
To bad you didn't live a lot closer. I would have you make me a box.

I tried to return your pm but it says you aren't allowed to receive them so check your setting and try me again....I'd love to help you out if I can.

spltuscon
02-15-2010, 07:46 PM
Dave- the paint is coming out great man, I can't wait to check it out in person!

CRXBMPN
02-15-2010, 07:51 PM
I met up with Steve Griff today to hook him up with my amps and he showed me his box done up with the same paint scheme... looked good, and this looks good too. I've used the exact same stuff for a box for mine but neglected the clear coat, now I see what I was missing!

Looks good.

boom24
02-16-2010, 06:26 AM
I met up with Steve Griff today to hook him up with my amps and he showed me his box done up with the same paint scheme... looked good, and this looks good too. I've used the exact same stuff for a box for mine but neglected the clear coat, now I see what I was missing!

Looks good.

thanks man

Annnarbor84
02-16-2010, 07:22 PM
Nice

Project_dog
02-17-2010, 03:29 AM
Any more pictures.

boom24
02-17-2010, 06:21 AM
not yet...lateron today

RWINDUSTRIES
02-17-2010, 06:37 PM
Looks great!! Hope I get to hear it some day.

boom24
02-17-2010, 06:41 PM
Looks great!! Hope I get to hear it some day.


at some point if are stuff goes tru ,i promise u will hear it