PDA

View Full Version : Worsts Warden Build V.2 - Pictures, YAY.



Johnny Law.Lulz
02-02-2010, 06:03 PM
Build
1989 F150 Standard Cab

- Audio Build
- 12" IA Warden
- Box is 2.39 Cubic Ft tuned to 37.5, i will be making exchanable ports later to drop to 32hz.
- RD 3250 V.1
- SAX 125.2
- Earthquake 6.5"s ( In the mail )
- Alpine IDA-x303
- 2 Powertech 110 Ah Batt ( carried over from previous, another coming soon )
- Alpine 6 Disc Changer ( carried over from previous )
- Powermaster 250 amp alt ( recently repaired )
- All Knu KLMX 1/0 and 4 gauge with knu fuseholders
- Hifonics MX-3 Bass Controller

Truck Improvements - Coming within a few weeks.
- Flat black wagon wheels
- Truck put in primer grey
- Roll pan
- Cowl induction hood
- All chrome trim put in flat black
- New exhaust, short tubes, race cat, cherry bomb glasspack
- AC Delete pulley ( already here )

Amp strips polished and logos blacked out.

Before
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050642.jpg

After
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050849.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050848.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050847.jpg

SAX with polished strip
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050844.jpg

What you can see through back window
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050845.jpg

MX-3
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050964.jpg

Alt, voltmeter, and stuff waiting for install
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050962.jpg

Warden Today
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/cid__IMG00258.jpg

Alpine installed
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060010.jpg

Johnny Law.Lulz
02-02-2010, 06:05 PM
Wire Ran
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060005.jpg

Batt
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060004.jpg

Installed Pix
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060006.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060007.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060008.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060009.jpg

View from between the seats
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1060011.jpg

Ray21
02-02-2010, 06:07 PM
Enclsoure specs?

Johnny Law.Lulz
02-02-2010, 06:07 PM
Truck as it currently sits.
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1040960.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1040961.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1040959.jpg

Johnny Law.Lulz
02-02-2010, 06:08 PM
Nice. What kind of enslosure for the Warden?

Ill edit the original post with that information.

Bobby322
02-02-2010, 06:10 PM
more pics of the box? Is it like a " T " or just a cube? How much did that HU run you? :)

Johnny Law.Lulz
02-02-2010, 06:12 PM
more pics of the box? Is it like a " T " or just a cube? How much did that HU run you? :)

its just a normal truck box with spacers on the front so i guess its kinda like a T, The HU was like $165 i believe.


I have an older pic of the box, since this pic i have added 2 more spacers on the front.
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/P1050843.jpg

Bobby322
02-02-2010, 06:16 PM
ahh i see. no middle seat?

Johnny Law.Lulz
02-02-2010, 06:17 PM
No, i dont need a middle. These are buckets from an 87 Bronco.

Bobby322
02-02-2010, 06:20 PM
haha nice i used to roll with no middle

mbrooky
02-02-2010, 06:21 PM
how's it sound? vids? and looks like a wiring nightmare! :p:

twistedchild420
02-02-2010, 06:21 PM
Warden Today
http://i92.photobucket.com/albums/l8/worstenemy453/F-150%20Build/cid__IMG00258.jpg



................
http://i174.photobucket.com/albums/w81/RHWW_DMan/daed0d5a.jpg

Johnny Law.Lulz
02-02-2010, 06:23 PM
how's it sound? vids? and looks like a wiring nightmare! :p:

It sounds pretty good, i havnt got the MX-3 hooked up yet so its not really dialed in.


................
http://i174.photobucket.com/albums/w81/RHWW_DMan/daed0d5a.jpg


lulz.


I might be getting a bigger truck and if i do, This sub will get a twin sister and a bigger amp.

302yota
02-02-2010, 10:47 PM
that sub is massive....nice setup

S.B.C.
02-02-2010, 10:51 PM
Looking good

hatedonmostly
02-02-2010, 10:54 PM
Ugh...

Wiring and everything needs some serious cleaning up bro. :crap:

Johnny Law.Lulz
02-02-2010, 11:14 PM
Its good, its not a show truck so its clean enough for me.

hatedonmostly
02-02-2010, 11:15 PM
Meh, I'd not feel comfortable driving around my daily like that

S.B.C.
02-02-2010, 11:17 PM
Meh, I'd not feel comfortable driving around my daily like that

could be the 130 deeeebeeeez u be bangin wit yo

hatedonmostly
02-02-2010, 11:19 PM
could be the 130 deeeebeeeez u be bangin wit yo

SQ setup :fyi::fyi:

pieper88
02-02-2010, 11:21 PM
what are you using to strip those amps?

Johnny Law.Lulz
02-02-2010, 11:25 PM
Meh, I'd not feel comfortable driving around my daily like that
Nothin is exposed, everything is secure and all connections will be checked regurlarly. No problemz.




could be the 130 deeeebeeeez u be bangin wit yo

HAHAHA.

SQ setup :fyi::fyi:

Bullshit

what are you using to strip those amps?

you talking about the polished strips ?

pieper88
02-02-2010, 11:28 PM
yeah the polished part

hatedonmostly
02-02-2010, 11:28 PM
Nothin is exposed, everything is secure and all connections will be checked regurlarly. No problemz.



HAHAHA.


Bullshit


you talking about the polished strips ?

135 w/ one 10" and 800W is good :fyi:

Johnny Law.Lulz
02-02-2010, 11:37 PM
yeah the polished part
1) Used a surface prep disc to get the anodization of
2) Used wet sanding from 800-1000-1500-2000 untill i got most of the scratches out
3) used the buff/polishing wheel on the bench grinder to get the shine.


135 w/ one 10" and 800W is good :fyi:

eh, not bad i guess

If this doesnt break 150 then i need to think of a new box desgin.

twistedchild420
02-02-2010, 11:40 PM
SQ setup :fyi::fyi:

Sorry but AQ and SQ don't go together :fyi:

hatedonmostly
02-02-2010, 11:42 PM
1) Used a surface prep disc to get the anodization of
2) Used wet sanding from 800-1000-1500-2000 untill i got most of the scratches out
3) used the buff/polishing wheel on the bench grinder to get the shine.



eh, not bad i guess

If this doesnt break 150 then i need to think of a new box desgin.

Good luck. I find it hard to picture one 12" doing a 150, no matter what vehicle it's in.

Unless you're talking burp


Sorry but AQ and SQ don't go together :fyi:

'twas a joke, lad. :)

infamous_e46
02-02-2010, 11:44 PM
http://i47.photobucket.com/albums/f159/2muchvtec/gifs/image.png

..

Johnny Law.Lulz
02-02-2010, 11:48 PM
i dont care if it takes a burp, this just isnt a burp build. It moves a **** ton of air. just sitting it, you can feel it around you.

skmfkr
02-03-2010, 07:37 AM
haha nice i used to roll with no middle

lol same thing i did when i had my reg cab dakota. but i had my amp on the floor...i had one amp on the back wall like you did worst and it edned up dying. that back wall is gonna flex alot and probly cause you problems

Bobby322
02-03-2010, 08:55 AM
you'll be wayy higher outlaw with a door open.

hatedonmostly
02-03-2010, 08:56 AM
you'll be wayy higher outlaw with a door open.

Can you do bassrace with a door open? lol

SQcrewcab
02-03-2010, 09:12 AM
lol same thing i did when i had my reg cab dakota. but i had my amp on the floor...i had one amp on the back wall like you did worst and it edned up dying. that back wall is gonna flex alot and probly cause you problems

His back wall should not flex to much. Look at his amp rack, it is BOLTED to the back wall, should help a bit with the flex. I do agree though, the back wall on most trucks do flex alot.

Johnny Law.Lulz
02-03-2010, 11:21 AM
lol same thing i did when i had my reg cab dakota. but i had my amp on the floor...i had one amp on the back wall like you did worst and it edned up dying. that back wall is gonna flex alot and probly cause you problems

I actually dont get too much flex because of my tuning. When i do my changable port, it should flex a lot more. But my amp rack is 2.25" thck and bolted to the back wall with 2 1/2 bolts. Its should be fine. :laugh:


you'll be wayy higher outlaw with a door open.

Yerp = )


Can you do bassrace with a door open? lol

I do MECA, all scores are outlaw.


His back wall should not flex to much. Look at his amp rack, it is BOLTED to the back wall, should help a bit with the flex. I do agree though, the back wall on most trucks do flex alot.
This. just like above

twistedchild420
02-03-2010, 11:23 AM
Vids?

hatedonmostly
02-03-2010, 11:24 AM
I do MECA, all scores are outlaw.

woot.

Johnny Law.Lulz
02-03-2010, 02:06 PM
Vids?

Im hoping within a week or 2, i think my brother has a vid camera.


woot.

Exactly.


I might be getting an extended cab F250 so this would be re-coned into a 15".

Johnny Law.Lulz
02-04-2010, 12:04 AM
Well, i started blowing the dustcap off today during my test and tune session so ill be fixing that tomorrow.

Go2Sleep
02-04-2010, 12:13 AM
Nice Sub.

Johnny Law.Lulz
02-04-2010, 12:16 AM
Earthquakes should be here tomorrow so everyone will get to see me deadening job and tweets and all.

Plottin4success
02-04-2010, 01:17 AM
I want that sub. That wiring is nasty, but who cares if its loud.


My back wall flexes like a mofo. I might be building me a new box here soon. 2.2 with an external aero so I can change tunings. I really want to tune low to like 26hz just to see what it feels like. lulz

GetLikeMe
02-04-2010, 01:31 AM
Is that bass controller a epicenter or is it just to control the amp? why not just run a RD bassknob?

Johnny Law.Lulz
02-04-2010, 03:19 PM
I want that sub. That wiring is nasty, but who cares if its loud.


My back wall flexes like a mofo. I might be building me a new box here soon. 2.2 with an external aero so I can change tunings. I really want to tune low to like 26hz just to see what it feels like. lulz

Wiring isnt really that bad. You can really see any of it with the seat all the back anyway. Give me $800 and the sub is yours.


Is that bass controller a epicenter or is it just to control the amp? why not just run a RD bassknob?

Couldnt find an RD knob. The MX-3 controls subsonic and everything and has a bass EQ and remote but i can turn the remote all the way to the left to turn it "off" and let the sub run solely on the setting on the amp. Its pretty sweet for $50 bucks on ebay.

Snow90
02-04-2010, 06:01 PM
150 with a single 12.

A lot harder than you may think.

Johnny Law.Lulz
02-04-2010, 06:04 PM
Sounds a lot better than i thought it would, im hoping to get it on a TL soon, im making some calls tomorrow to find one.

Also fixed the dustcap, looks like **** but it works lol.

CranberryYumYum
02-04-2010, 10:17 PM
http://i678.photobucket.com/albums/vv150/CranberryYumYum/j5wftz.gif..

Johnny Law.Lulz
02-05-2010, 12:36 AM
if your ******* has something to say then say it.

hatedonmostly
02-05-2010, 12:50 AM
vids

Mookie
02-05-2010, 12:55 AM
Looks good. Mean looking driver.

Johnny Law.Lulz
02-05-2010, 12:08 PM
Well its moving a **** ton of air on a lot of songs, i have it holding a 200 Amp fuse right now, at full driving tilt on my single batt and stock alt its only dipping to 11, I have to put the powermaster in and find basscourt so i can grab another one of these batts. Once i get the other batt, im going to see if itll hold a 150 Amp so i can get into AS3 in MECA.

Vids will come, be patient.

CranberryYumYum
02-05-2010, 04:57 PM
if your ******* has something to say then say it.

i was joking. just thought your thread needed a funny picture

:crying:

good build..!

VIDS

Johnny Law.Lulz
02-05-2010, 06:29 PM
Got the Earthquakes in today. They look sick.

Johnny Law.Lulz
02-07-2010, 12:15 PM
I think i might get a Stetsom 4K2D soon. Pics of the earthquakes will be up shortly. Maybe i can get a ****** vid with the camera today.

skmfkr
02-07-2010, 02:31 PM
I think i might get a Stetsom 4K2D soon. Pics of the earthquakes will be up shortly. Maybe i can get a ****** vid with the camera today.

in my expereince i had the 3250 wired to .5 oh and a 4k2 wired to 2ohms and the 4k2 was 1.5db down from the 3250. i dunno what the imp rise was tho and the box ended up not getting used cuz it ****** lol it was too big i think

Johnny Law.Lulz
02-07-2010, 03:10 PM
O rly. I might just save for a SAZ-4500 then.

power-fanatic07
02-07-2010, 03:13 PM
1200 for a 4500 vs 6-800 for a used 3500

also, i hear the presale for the saz2500's will be starting in a month or so

thericanballer
02-07-2010, 03:16 PM
i wants vids :(

Johnny Law.Lulz
02-07-2010, 03:17 PM
I will hopefully get out today since this blizzard is done and get the earthquakes in.

thericanballer
02-07-2010, 03:22 PM
I will hopefully get out today since this blizzard is done and get the earthquakes in.

well then, one word for you....HURRY lol
its pretty cold in FL right now hahhaha

CranberryYumYum
02-07-2010, 05:39 PM
well then, one word for you....HURRY lol
its pretty cold in FL right now hahhaha

yeah i know the low is supposed to be what 68 or something?

Plottin4success
02-08-2010, 01:16 AM
yeah i know the low is supposed to be what 68 or something?

lol

wishuponansg
02-08-2010, 01:59 AM
yeah i know the low is supposed to be what 68 or something?

nuh-uh... like... 58. lol.

Johnny Law.Lulz
02-08-2010, 02:02 AM
lulz, the low here is like 25ish i believe, to go with the 2 feet ish of snow on the ground.

Plottin4success
02-08-2010, 10:21 AM
Where are the pics *****?

Dont give me that "its snowing outside" bullshit excuse either. Pansy.

Johnny Law.Lulz
02-08-2010, 12:41 PM
Pix have been up forever ******.

This might all be coming out and going in the F250 i might be buying, lol, having no job and still gettin payed without the parents help is a hard *** life.

Snow90
02-08-2010, 01:03 PM
Pix have been up forever ******.

This might all be coming out and going in the F250 i might be buying, lol, having no job and still gettin payed without the parents help is a hard *** life.

Sounds hard..

Johnny Law.Lulz
02-08-2010, 01:30 PM
completely hard. lulz.

Snow90
02-08-2010, 02:39 PM
completely hard. lulz.

LULZ little boy.

Johnny Law.Lulz
02-08-2010, 02:42 PM
The F250 is another standard cab though = (

hatedonmostly
02-08-2010, 03:11 PM
wtf do you do for money feg

Johnny Law.Lulz
02-08-2010, 03:27 PM
I let women play out fantasies on my body for money.

kylediablo
02-08-2010, 04:04 PM
nice warden, tommys about to get me some 21's, hopefully soon lol

Johnny Law.Lulz
02-08-2010, 04:06 PM
The amp is a powerhouse, i cant get it to clip on the setting its on now, i have the MX-3 dialed down a tad for daily but i have a lot on tap ready for competitions. I need to figure out what im going to do because my first comp is in March.

statonburrell
02-10-2010, 08:12 PM
http://img268.imageshack.us/img268/1102/1897coolstorybrahcat.jpg
..

Johnny Law.Lulz
02-10-2010, 11:58 PM
lulz

Plottin4success
02-11-2010, 01:04 AM
I meant pics of the earthquakes. When are the vids coming?

Johnny Law.Lulz
02-11-2010, 01:06 AM
Idk and i had pix of them but dont know what happened. I havnt put them in yet.

Im waiting untill May to get a new Truck so i dont have to hurry with transplanting the system. My first comp this season is March 7.

Plottin4success
02-11-2010, 01:09 AM
kk.

I should be getting my dsc2000 here soon. I had some unexpected **** come up these last 2 months and had to put the system on hold. Cant wait till I get it. The wait is killing me. :laugh:

Johnny Law.Lulz
02-15-2010, 10:54 PM
Im hoping to get some numbers in here shortly. Im expecting a 148 atleast and i know if its anything short of that, its because of my box. I cant do anything about it untill i get my new truck so ill just have to pack it but im hoping it wont be disappointing.

Plottin4success
02-23-2010, 03:40 AM
So where are the vids/numbers at fagboy?

Johnny Law.Lulz
02-23-2010, 11:42 AM
This **** is done. Warden, Earthquakes, SAX coming out today, RD 3250 V.1 Sold.

Bobby322
02-23-2010, 01:16 PM
you dont like it?

Johnny Law.Lulz
02-23-2010, 01:18 PM
My box was wack and im selling the truck. Warden will be reconed to a 15" and used in my truck on 4-5K

Bobby322
02-23-2010, 01:28 PM
lol all the work just to tear it all out? what was wrong with the box?

Johnny Law.Lulz
02-23-2010, 01:30 PM
It was right for the sub, tuned too high, im doing a slot porti n my next build. Stay tuned for the V.3 build.

ramos
02-23-2010, 01:34 PM
The amp is a powerhouse, i cant get it to clip on the setting its on now, i have the MX-3 dialed down a tad for daily but i have a lot on tap ready for competitions. I need to figure out what im going to do because my first comp is in March.

Roanoke Show ? :)

Johnny Law.Lulz
02-23-2010, 01:36 PM
Im not going to be at the one in March i dont think but i should be at the one in April with the new truck. Im hoping.