View Full Version : The diameter of the hole for

02-02-2010, 03:07 AM
The diameter of the hole for the port, in the front panel, was cut about 1/4 of an inch oversized. A wrap of 3/16 thick Weather Strip was applied to the outside of the port. The port was squeezed into the hole resulting in a snug and secure fit. I bought three pairs of ports that could be trimmed to different lengths and inserted into the enclosure in this manner.

Self Certification Remortgage (http://www.self-cert-mortgage-centre.co.uk/self-certification-remortgage.html)
auto insurance quotes (http://www.quotes-auto-insurance-review.com/)