Yanks Fan: 2005 TC Scion

[basebalz13]

Yanks Fan just dropped his car of thursday, for a complete overhaul with new wire and new equipment. The previous shop HACKED this sucker up :( none the less ive been excited about getting this.

HU- Alpine 9886
Front Stage- Hybrid Audio 6.5" Clarus component se
Front Stage Amp- True Tech 200.2
Substage- Sound Splinter RL-s 12"
Sub Amp- Orion 2500D
Kicker wiring


Here is some pics of the car


http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0367.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0368.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0369.jpg




The goodies

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0366.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0363.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0364.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0365.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0362.jpg


and a Sexi Plexi from Fraze...Does GREAT work at nice prices, anyone interested in have a piece like this done should hit him up


http://i258.photobucket.com/albums/hh277/basebalz13/Orion.jpg

[oxsign]

Nice stuff, but that sub is an rls not an rlp.

[basebalz13]

heres 3 pics that i found quite funny from the previous shop...

Everytime you closed the doors you would hear a "clank" i was like hmm, i need to figure out what that is and fix it..Come to find out the shop put the crossovers in the doors, didnt even put them in a zip lock bag to keep them from getting wet AND didnt secure them. Just left them there hanging

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0370.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0372.jpg



Im not sure what amp he had installed before for his substage, but the shop ran a single 4 gauge run from the front to the back, then couldnt use a distro block but just wrapped some 8 gauge around the 4 gauge for high front stage amp...

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0375.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0376.jpg

[basebalz13]

First I started with the doors, getting the new wiring ran(previous shop just ran to the dash and back fed through the stock wiring)

Knukonceptz 12 gauge and this little boot= no fun! ha

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0373.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0374.jpg



Previous Speakers

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0384.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0383.jpg


New Hybrids

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0386.jpg

Finsihing in the Tweeters

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0378.jpg

[basebalz13]

hooking up the crossovers



http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0389.jpg



Speaker wire ran nicely down the side..



http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0382.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0390.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0391.jpg

[Corey J.]

Im interested in this ! I have this exact same car. I got 3 sets of comps for the frontstage just dont know how im going to do it nicely. The trunks are small on these things, so I had to take out the spare tire and poam to put a descent size box in !

[JBCW1]

fraze did my plexi as well, great stuff. looks good so far and lots of nice equipment

[tehWorstest]

I did that with my crossovers once :laugh:

[blazeplacid]

install looks nice so far, but some of the pics.....need a better camera man or when taking the pic stand still for 2-3 seconds after the photo is taken.

[basebalz13]

heres my slave worker :D haha. he is a teammate that loves helping out with installs...he has a eclpise that we are about to start working on...

Running Power wire. 1 run of kicker 1/0 for + and -. Came throught the steering column


http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0392.jpg



http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0393.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0395.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0396.jpg

[basebalz13]

heres the first look of the box :)


http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0398.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0399.jpg



working on the carpet

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0397.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0400.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0401.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0402.jpg


ughhh lol

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0403.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0404.jpg

[basebalz13]

Amp Rack


http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0405.jpg


hmmm???

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0407.jpg




wonder whats going on there...

notice fans are opposite, one ***** air in, other pushes air out




http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0408.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0409.jpg



http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0410.jpg




uhhh ohhhh



http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0411.jpg

[basebalz13]

double post mess up

[basebalz13]

uploading finshed pictures now

sorry for the lack of pictures and details, but this was sorta a rush build. car got dropped off on thur and had to be picked up on sunday around 3pm...but we got it done :)


http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0412.jpg

[captaincheesey]

Looking nice and clean.

[basebalz13]

Nice stuff, but that sub is an rls not an rlp.

oh oops, lol edited...thanks!

[basebalz13]

Im interested in this ! I have this exact same car. I got 3 sets of comps for the frontstage just dont know how im going to do it nicely. The trunks are small on these things, so I had to take out the spare tire and poam to put a descent size box in !


what size did you manage to fit?

the box in the pics is 3.25 cubes after displacement

[basebalz13]

install looks nice so far, but some of the pics.....need a better camera man or when taking the pic stand still for 2-3 seconds after the photo is taken.


lol, i know. i **** at taking pictures, and the other person ***** even worse haha

[basebalz13]

Looking nice and clean.



thanks, that was the look i was going for :)

[Corey J.]

My tc has a Madmaxx 18 in it with a box volume of 6.2 cubes tuned to 31hz. I have a discus 2000.1 on it ! Hits the lows very well. The sub i got can handle 4k rms but dont have the electrical to support a Memphis 4k . Without any deadener these cars sound like an empty folgers can.

[Maglite]

Nice clean install. :cool:

[basebalz13]

My tc has a Madmaxx 18 in it with a box volume of 6.2 cubes tuned to 31hz. I have a discus 2000.1 on it ! Hits the lows very well. The sub i got can handle 4k rms but dont have the electrical to support a Memphis 4k . Without any deadener these cars sound like an empty folgers can.

oh nice, the one scott built. i know about that one :crazy: throw some power to it


and dang thats BIG nice! haha

[basebalz13]

Nice clean install. :cool:

thank you

[basebalz13]

and here they are...


under the hood


http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0414.jpg


New Headunit

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0415.jpg


and the amp rack

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0417.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0420.jpg

http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0424.jpg

[Snow90]

Install looks clean as ever.

Except rl-s ftl.

[72 chevy van]

nice i like what you did with the amp nice sub too.

[Cashdollar2009]

The amp rack looks awesome!!! Nice job, MUCH cleaner than the previous shop attempts... :crap:

[basebalz13]

i decided to show the full plexi piece, instead of just the orion and guts because i like what the LED lights did to it around the edges

[ejschultz]

Does that factory cover close over the HU? I'm thinking about getting a tC and it would be something that would be cool. Of course, it's not a deal breaker if it doesn't.

[Corey J.]

How does it sound is my question ?
Heres a vid of mine . Dont do any justice at all. At least my cam dont make that ****** bass sound you here on alot of cameras.
http://i112.photobucket.com/albums/n196/corey608/th_Littletcflex001.jpg (http://s112.photobucket.com/albums/n196/corey608/?action=view&current=Littletcflex001.flv)
And pic of my sub vs. the tss 18
http://i112.photobucket.com/albums/n196/corey608/newMOJOMAX008.jpg

[yanks fan]

First off, David's the fukkkking man. The install is unreal. The box and amp rack came out absolutely sick. I can't even tell you how pleased I am with how it came out. I can't say thanks enough David.

As for the review. I couldn't be happier with it. The low end is great on the sub and even the "higher" end for the sub is pretty strong. On my drive home I listened to everything from Frank Sinatra to Young Jeezy and from Michael Buble to Sublime. I previously had a 15" SI Mag V3 and thought the SQ from that was nice but the RL-s makes that sub sound sloppy. The RL-s stays so smooth for lack of a better word. Now the Mag is probably louder on the mic but the RL-s has better SQ hands down. The HAT components are worth every penny as well. The midbass is absolutely awesome. They blend in with the substage perfectly. It doesn't over power the sub at all and the sub doesn't over power the front stage either. I must say this is the nicest sounding system I've ever heard. One of the reviews I read for the components a while back said they were weak for rap and sounded bad on rap but it sounded great imo. The midbass really did well on all of the music I listened to. I can't say enough how much I like it all. This system isn't the loudest I've owned but it blows the other ones away in SQ. I'll try and make some videos for you guys of the excursion of this sub cause it's nasty.

Once again, thanks David. I can't say thanks enough bud. It all turned out better than I had anticipated. The install is absolutely sick and the system is so clean sounding.

[basebalz13]

Does that factory cover close over the HU? I'm thinking about getting a tC and it would be something that would be cool. Of course, it's not a deal breaker if it doesn't.


yes it closes completely, hidden away

[basebalz13]

First off, David's the fukkkking man. The install is unreal. The box and amp rack came out absolutely sick. I can't even tell you how pleased I am with how it came out. I can't say thanks enough David.

As for the review. I couldn't be happier with it. The low end is great on the sub and even the "higher" end for the sub is pretty strong. On my drive home I listened to everything from Frank Sinatra to Young Jeezy and from Michael Buble to Sublime. I previously had a 15" SI Mag V3 and thought the SQ from that was nice but the RL-s makes that sub sound sloppy. The RL-s stays so smooth for lack of a better word. Now the Mag is probably louder on the mic but the RL-s has better SQ hands down. The HAT components are worth every penny as well. The midbass is absolutely awesome. They blend in with the substage perfectly. It doesn't over power the sub at all and the sub doesn't over power the front stage either. I must say this is the nicest sounding system I've ever heard. One of the reviews I read for the components a while back said they were weak for rap and sounded bad on rap but it sounded great imo. The midbass really did well on all of the music I listened to. I can't say enough how much I like it all. This system isn't the loudest I've owned but it blows the other ones away in SQ. I'll try and make some videos for you guys of the excursion of this sub cause it's nasty.

Once again, thanks David. I can't say thanks enough bud. It all turned out better than I had anticipated. The install is absolutely sick and the system is so clean sounding.



:)

[grimreper912003]

http://i112.photobucket.com/albums/n196/corey608/newMOJOMAX007.jpg


I has a big ben jersey too :D we can be matchy at the next show :)

[ButtaMax]

That a BIGazz box, not my cup of tea but CLEAN!

wheres the deadener?

[wone]

very nice!

[LOLzthrowaway]

Very clean man. Good work!

[Fraze]

looks good, I love the equipment you chose to. I bet hes ALOT happier than before lol.

whoever did that plexi is the man. hha

[BumpinKota]

Nice install but why would you ever put that speaker in a sealed enclosure those things SLAM in a ported box and you have a hatch it would be so loud in there ported

[jerseyboy]

thats a clean *** install bro!! props!!!

[basebalz13]

Nice install but why would you ever put that speaker in a sealed enclosure those things SLAM in a ported box and you have a hatch it would be so loud in there ported

I'm sure it does, but it also slams in this sealed box IMO. Also that is what the customer wanted.

[basebalz13]

thats a clean *** install bro!! props!!!

Thanks man.

[ramos]

uhhh ohhhh



http://i258.photobucket.com/albums/hh277/basebalz13/John%20Gregory/IMG_0411.jpg

Hmmmmm where ever did you get that idea :up2somet: And you didn't need to reverse the fans, could have just swapped the leads and had the motor run the opposite way :)

[basebalz13]

Hmmmmm where ever did you get that idea :up2somet: And you didn't need to reverse the fans, could have just swapped the leads and had the motor run the opposite way :)

LMAO! I totally didnt think about reversing the polarity, oh well. Achieved same goal :thumbsup:

and hehe :D

[rosshimself13]

also you could of added a vent to the rack, and had them both blowing out and you would have achieved more airflow, could have used a grill made for a pc fan and put a coffee filter behind, to keep dust out... just an idea for later or next time... looks like you should use the money you made on the install for some new kicks.. i saw them a couple times and it bothered me for some reason lol

really like the amp guts/plexi idea

[basebalz13]

Haha, I finally retired them. They was my lucky install shoes!!!