85' Camaro 2 12's Fiberglassed. Memphis. (Old Build log)

[kylediablo]

One of my friends came to me and said a kid he knew had his system done in his camaro by a local shop and that they had done a crappy job and everything was falling apart. when i first saw it i noticed that they didnt even build down into the well in the back and jsu thad a flat box layin on top. it was such a wast of space and the memphis subs that were in it sounded horrible in a sealed box. the look of the box wasnt to bad with the blue plexi but just the way it was put together was poor. i have had alot of competition in the past with the shop that did it so being that the kid came to me to redo it, i wanted to overdo it haha... here it it...

http://i136.photobucket.com/albums/q170/kylediablo/sundownchance.jpg
original system. (later replaced euipment with memphis)
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey002.jpg
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey005.jpg
this was the base of the box.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey007.jpg
box structure built.. i acually ended up with 3 cubic ft before displacment. i built up 3/4" around the edge and rabbited out the edge to stable fleece to. the top is a 3/4" base with a 1/2" recess.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey012.jpg
fleece.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey015.jpg
glassed.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey022.jpg
sanded and fillled. the black area is a platform that will have a backlit logo on it. the smaller hole is for the 4" areoport.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey025.jpg
covered in some blue vinyl. finally got my hands on the well needed Formica 155red glue. i could stick myself to the ceiling with that hahah,.

[kylediablo]

http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey028.jpg
the amp box.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey038.jpg
nice wiring job lol.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey039.jpg
another view of the wiring,
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey048.jpg
i made a plaque of my logo by getting a reverse decal made, and using that to paint it onto the back of some 1/4" plexi. then i frosted the logo so that the LEDS wouldnt be visable and it would jsut give it more of a glow. then i buffed it all out.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey054.jpg
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey055.jpg
finished product.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey057.jpg
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey058.jpg[/IMG
[img]http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey060.jpg
it gets alot of looks and it sounds great to. i wish i had a better camera to take a night picture of the LEDS though.
http://i136.photobucket.com/albums/q170/kylediablo/ChanceClugey061.jpg

[boomintahoe]

Awesome build man. Been offered a job yet doing this? I need to come to you for some vinyl work. I heard its one of the toughesy materials to work with. My amp rack needs to be vinyled yet...

[kylediablo]

Awesome build man. Been offered a job yet doing this? I need to come to you for some vinyl work. I heard its one of the toughesy materials to work with. My amp rack needs to be vinyled yet...

haha i got one but it sux, i rarely do custom work. you just gotta heat it up and have some good glue, send me picks of the amp rack

[kylediablo]

and have patience lol

[cf2004]

dang man, you do nice looking work.

[misfit138]

nice work, man...

[tc300]

W O W!! even more nice work kyle.....

so when can i get a box built?!?!?!!? j/k

[basshedz06]

Nice job Kyle I kno it's an old build bro but an oldie is a Goldie lol I know that's cheesy