PDA

View Full Version : 8th gen Civic Kick Panels, A Million Pics!! -Nexations Creations!



Nexson
01-10-2010, 08:39 PM
Hey Guys,

Here is a set of midranges with tweeters pods into a 8th gen Civic Coupe. I made these over the past month and I have compiled all the updates through other post (on other forums) and combined them into one thread for CarAudio.

ENJOY!!

I started with the midranges. Although the rings will cover this area, I still wanted it all one color just because!
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5752-1.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5819.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5822.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5823.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5824.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5828.jpg

I got a set of rings from epicenterdesigns, they were PERFECT! Thanks Jon. I filled them a bit to fit how I wanted them.

http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5834.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5845-2.jpg

Here I was mounting the ring in the best position according to space. the driver's side kick panel is very tight. There is a small area to work within the panel, so the positioning had to be precise. Owner wanted speakers facing dome light.

http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5864.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5867.jpg

Nexson
01-10-2010, 08:39 PM
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5868.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5869.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5870.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5873.jpg

Here is the tweeter pod. I had to make a custom set to fit the tweeters. I only had one tweeter cup to work with, so I decided to just make my own. I use PVC for this and cut it bigger to size. A few passes with the filler and I got it perfect. I am good with tedious items as this is. The tweeter will get wrapped in two layers of electrical tape for a slight pressure fit, then 2 dabs of hot glue from the back will secure it.
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5875.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5876.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5879.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5883.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5886.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5895.jpg

Nexson
01-10-2010, 08:40 PM
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5897.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5901.jpg

Speaker and Tweeter Pod Placement
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5907.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5909.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5910.jpg

Fleece stretched here. Not the prettiest, but I could not stretch to the edges because the dead pedal sits against the fit panel, so far side of the panel needs to remain intact. I obviously cannot wrap to the oppose side because of the hood release. Getting the perfect wrapping job does not bother me as I know it is easy to fix up.
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5914.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5920.jpg

Some B440 Polyester Resin
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5925.jpg

Here is where I sanded down the fleece and feathered in the edges with duraglass so that I could lay down the glass. I prefer to lay down the glass on the formed structure for more support. As you can see the rough edges that were CA glued with the fleece, easily turn into a nice smooth transaction in this step,
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5932.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5933.jpg

Nexson
01-10-2010, 08:41 PM
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5935.jpg

So here is where I put down some special epoxy around the brittle edges. Since I do not want to get the fiberglass to close to my perfect edges within my tweeter pod, I use the epoxy as a structural bond between the PVC and fleece, then I can glass over that, but not so close to the edge.
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5936.jpg

Some 1.5 oz mat
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5955.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5958.jpg

a little duraglass, still a lot of smoothing to do, but it is quickly taking shape.
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5966.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5968.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5969.jpg

I put down some Rage Extreme where it needed it. It is now time for primer. I am going to use some slicksand on this panel to fill in all the defects. I have to pick some up though.

http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5973.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5974.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5975.jpg

Nexson
01-10-2010, 08:42 PM
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5976.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5978.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5981.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5984.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5986.jpg

I primered the pod with slicksand, which is a very thick primer. I got it to run in many areas to build up the thickness. Once that was all sanded down I hit it up with some rattle can hi build primer. From here I will tweak out the little defects still around with spot putty. Not much longer now!
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5989.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5991.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_5994.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6000.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6002.jpg

Nexson
01-10-2010, 08:42 PM
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6006.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6011.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6012.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6015.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6018.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6021.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6022.jpg


Still Progressing through getting the surface defect free. I worked on the hood release opening. That area is tight for sanding but with have sanding in tight spots for a major of my fiberglassing life, it is no biggie. Some other areas were smoothed out as well. It is about 92% there with primer and almost ready for paint. Just some filling here and there, sand down and reprime and should be good to go!

Then I have to make the other one!
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6028.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6030.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6031.jpg

Nexson
01-10-2010, 08:43 PM
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6034.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6035.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6036.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6037.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6038.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6039.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6042.jpg


So I got some work done today. On the first pod, I am just filling in small sanding scratches, which takes about 4-6 phases of filling,sanding and primering. Once, I get to this stage in the project, I am happy anyways!

I was able to get some work on the 2nd kick panel. I copied and cut out the exact shape as cut on the opposite kick. I will use this as reference to match up the tweeter and speaker identically to the original kick.

http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6043.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6045.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6046.jpg

Nexson
01-10-2010, 08:43 PM
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6048.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6053.jpg

I got started on the opposite kick panel. With this kickpanel, I am able to stretch the fleece to the opposite end of the panel itself. With the driver's side, I had to allow for the dead pedal to be installed without interference.

These are the pictures thus far, I am not a fan of how it looks in this stage, but the adhesion between the fiberglass and plastic is fantastic and that is all I care about at this point. I am going to sand it all down now and clean it up!

Here's some pictures.

http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6118.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6122.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6124.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6130.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6131.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6132.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6134.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6135.jpg

Nexson
01-10-2010, 08:44 PM
So I went threw a couple sanding wheels on the dremel and got this thing shaped just the way I want. Usually when feathering the fleece into the plastic, you get the fabric very brittle, this is not a problem because I have a solution. Obviously this panel is going to get a couple layers of glass, but before that, I use an epoxy that gets beneath the fleece and makes a solid bond between the brittle fabric and the panel itself. This allows for a solid foundation for the glass to lay. I went around with the epoxy in all the weak areas . When working with small parts like this, and the parts being plastic, you have to obviously make accommodations. Next I will glass, then fill and sand.

http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6147.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6148.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6154.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6155.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6156.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6157.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6161.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6163.jpg
http://i36.photobucket.com/albums/e25/nexson1/2nd%20album/IMG_6164.jpg

I sanded down the epoxy that dried overnight. With this epoxy, it is a good idea to just let it dry completely instead of sanding it to find out it is still a bit "gou-E" at the bottom, which pretty much goes with all epoxies. At any rate, I fiberglassed with B440 and 1.5oz. This one is shaping up quickly!

http://i36.photobucket.com/albums/e25/nexson1/IMG_6167-1.jpg

Nexson
01-10-2010, 08:44 PM
http://i36.photobucket.com/albums/e25/nexson1/IMG_6169-1.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6172-1.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6173-1.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6177-1.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6180.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6184.jpg

I got the first layer of duraglass on and sanded down. I am currently filling in the deep crevices in the filler, then off to slick sand!
http://i36.photobucket.com/albums/e25/nexson1/IMG_6290.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6291.jpg

A little eye candy for you all =)

http://i36.photobucket.com/albums/e25/nexson1/IMG_6326.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6327.jpg

Nexson
01-10-2010, 08:44 PM
http://i36.photobucket.com/albums/e25/nexson1/IMG_6328.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6330.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6334.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6337.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6343.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6346.jpg

So I am making progress on the passenger side kick. With all the fiberglassing and sanding, the tweeter opening needed to be slightly tweak. With the help of a little filler, the tweeter opening is back to perfect again. So a little primer and a little spot putty and this kick is almost ready for paint!
http://i36.photobucket.com/albums/e25/nexson1/IMG_6428.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6430.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6447.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6448.jpg

Nexson
01-10-2010, 08:45 PM
http://i36.photobucket.com/albums/e25/nexson1/IMG_6450.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6503.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6506-1.jpg


Here's how they looked once they were finished =)

http://i36.photobucket.com/albums/e25/nexson1/IMG_6802.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6804.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6806.jpg
http://i36.photobucket.com/albums/e25/nexson1/IMG_6807-1.jpg

James Bang
01-10-2010, 08:50 PM
are they just going to vent into the carpet?

Bfat567
01-10-2010, 08:52 PM
Some kick a$$ work man.

modskwod
01-10-2010, 08:55 PM
**** nice work son.

mobeious
01-10-2010, 09:04 PM
what did u use for the finish?

joe98chevy
01-10-2010, 09:06 PM
Very nice :)

Nexson
01-10-2010, 09:07 PM
Thanks Guys!


Duplicolor Bedliner, then toned it down with flat black

scorpion055
01-10-2010, 09:27 PM
this for personal use or a customer? how much do you charge?

Nexson
01-10-2010, 09:37 PM
I do fiberglass on the side. Just google "nexations creations"

I under charged, but $275

pickup1
01-10-2010, 09:38 PM
any pics of them installed?

blazron22z
01-10-2010, 09:51 PM
good work

tez4life
01-10-2010, 09:52 PM
**** nice work man, they look great...good pics too.

jerseyboy
01-10-2010, 10:04 PM
wow.. those look amazing!!!

ButtaMax
01-10-2010, 10:43 PM
what can you really say but PERFECT!

strong*I*bumpin
01-11-2010, 12:08 AM
these look so stock it's not even funny,nice work

jonny101abc
01-11-2010, 12:16 AM
Very nice work

4solobaricz
01-11-2010, 12:17 AM
**** u did a hella good job man

nutnbutcustm
01-11-2010, 01:22 AM
I must say these look absolutely amazing,ive been installing and glassing for 16 years and i can say these are some of the best looking kicks ive ever seen,look very stock the only question i ask is why no grille? they look so stock if there was a grille it would make them sooo stealth,but like i said very,very nice work. very good attention to detail. kuddo's

TaTonka
01-11-2010, 03:17 AM
All I can say is: WOW!!!

Very clean work man. I'm working on my new pair of door pods. Hopefully they turn out as good as this did.

One question:
Will that filler stick to the PVC over time? I have always heard it would crack.

blgaudio
01-11-2010, 03:30 AM
I had to post and say I'm amazed at the level of perfection in these kicks! Awesome work man!

Ridintwo6s
01-11-2010, 03:39 AM
awesome work but how did you get the speakers to stay in place ... cant see how you screwed them in .. im assuming the mounting panels in the first pictures? use small screws and mounted from the rear?

nutnbutcustm
01-11-2010, 03:54 AM
and did you use duplicolor spray on bedliner? or the roll on? what color can if it was the spray?

lucas569
01-11-2010, 04:07 AM
so you do them for $275? how do you determine angle without the car if one was to contract you to make a pair?

Blue Fury
01-11-2010, 06:22 AM
pics of them installed

mbrooky
01-11-2010, 08:46 AM
effin **** yo!:*******:

scorpion055
01-11-2010, 01:17 PM
i agree with all above posts........just amazing. probably the best glass work ive seen on here. wow.

sub-FATHER
01-11-2010, 01:37 PM
good job, that **** looks good.

jwesenick79
01-11-2010, 02:27 PM
wow, amazing work. The paintreally makes them looks stock.

canyouhearmatt
01-11-2010, 03:04 PM
wow dude that was amazing im very impressed i wish one day i could have the patience and skill to do something like this.

stilltippin863
01-11-2010, 03:29 PM
Very Nice Work!!!!!!

kmanian
01-11-2010, 09:52 PM
Absolutely awesome! Pics of them installed

Nexson
01-11-2010, 10:00 PM
To all the compliments, they are truly valued. Alot of time has been spent on these sanding away and I can honestly say I enjoy each and every project that each customer challenges me with. Thanks for the compliments, they make the time and effort worth it, so much!

To the questions, I have addressed them below.





any pics of them installed?

I sent them out today and on Wednesday, the owner will receive them.


I must say these look absolutely amazing,ive been installing and glassing for 16 years and i can say these are some of the best looking kicks ive ever seen,look very stock the only question i ask is why no grille? they look so stock if there was a grille it would make them sooo stealth,but like i said very,very nice work. very good attention to detail. kuddo's
I appreciate that! I only been on glass 5 years, so maybe I am the noob! We never implemented in a grill because we recessed the speaker and we like the look of the speaker itself. Another problem was that these mid's didn't come with a grill as well. If they had, they would be impleneted. A mdf ring can always be cut and grill cloth and be wrapped to create an insert for a grill.

All I can say is: WOW!!!

Very clean work man. I'm working on my new pair of door pods. Hopefully they turn out as good as this did.

One question:
Will that filler stick to the PVC over time? I have always heard it would crack.
All you got to do is rough the PVC up well and it will stick. I always fiberglassed and epoxied over the filler/pvc seam, as you can see in the pictures, it is the white "stuff"

and did you use duplicolor spray on bedliner? or the roll on? what color can if it was the spray?It was the aersol spray, it is a blue can. That is the best coarse texture I have seen to date.


awesome work but how did you get the speakers to stay in place ... cant see how you screwed them in .. im assuming the mounting panels in the first pictures? use small screws and mounted from the rear?
I should have taken a picture of this. But i used about half inch self tapping wood screws from the back. If you look at the original first pictures, there is 4 holes in the red "square" I was able to hit 3 out of 4 screw holes from the back and it is soild.

Nexson
01-11-2010, 10:03 PM
For those who are interested, here is a small portion of some of the other work I do. I mainly do dashes.
http://www.mp3car.com/vbulletin/fabrication/126357-my-fabrications-part2-220-images-worklogs-gauges-monitors-painting-dsl.html

tez4life
01-11-2010, 11:09 PM
Once again, sick work on those kicks.....I remember a while ago you doing a 1/2 din dvd player flushed in a dash, right? Just realized you name looked so familar.

Nexson
01-11-2010, 11:52 PM
Once again, sick work on those kicks.....I remember a while ago you doing a 1/2 din dvd player flushed in a dash, right? Just realized you name looked so familar.

Well, The half din is where it all started. thats where I got started with all this and working on interiors. I learned alot and took alot of half dins back, to repair. It is all a process in life. I have learned alot since then and can apply it to my projects now, to ensure a quality project. The main issue I battled was heat within a car, would actually crack seams. Since then I have researched alot and have found a good process with correct materials.:D

lucas569
01-11-2010, 11:53 PM
so you do them for $275? how do you determine angle without the car if one was to contract you to make a pair?

:confused:

Nexson
01-12-2010, 05:30 PM
:confused:

This was a process that the customer and I went over. The customer already knew the angle he wanted, so I sent him a series of 6 pictures in which the MDF ring was aimed in 6 different positions. He picked the picture/stance that worked the best for his setup and I rolled with it!:D

lucas569
01-13-2010, 02:10 AM
Sounds good, whats the turn around time?

i would love to get some done, still researching 4" mids at the moment.

Nexson
01-13-2010, 09:16 PM
Sounds good, whats the turn around time?

i would love to get some done, still researching 4" mids at the moment.

These took a month to complete, however it should had only taken about three weeks.

redsoxfanChris
01-14-2010, 03:07 AM
What type of paint did you use to get that factory plastic texture on the finished kicks? I'm looking for the exact same texture to finish my dash pieces. Check them out in the photo gallery.

Nexson
01-15-2010, 04:38 PM
it is duplicolor bedliner

Nexson
01-15-2010, 04:39 PM
Here they are!

http://i36.photobucket.com/albums/e25/nexson1/1-15.jpg
http://i36.photobucket.com/albums/e25/nexson1/2-14.jpg

lucas569
01-15-2010, 04:54 PM
sick

Nexson
01-15-2010, 07:55 PM
thanks!

SqGuySoCal562
01-15-2010, 08:18 PM
Very nice work man c
kudos! one question have u worked with Accords? i have a 96LX sedan i would love to get done , i'm usually doin this myself but with being at school full time and living in a apt i have no room to created those like i would like. so if u are able to come up with some kicks for myyear Accord hit me back so we can work out the details. my mids are goin to be HAT L3'si'll just need the kicks for the mids i will put my tweeets up in the A-pillar.

thx,


Micheal
[email protected]

kmanian
01-15-2010, 10:53 PM
One thing, your work is awesome, but holy crap! all that work to make them look stock and put them in a car that has a hole in the carpet and is unkept. those things should me in BMW 7 series ...

lucas569
01-16-2010, 02:17 AM
One thing, your work is awesome, but holy crap! all that work to make them look stock and put them in a car that has a hole in the carpet and is unkept. those things should me in BMW 7 series ...

to me it looks thats where the footrest WAS.

benzmansl65amg
01-16-2010, 02:43 AM
Ridiculous

Chris Z
01-16-2010, 03:22 AM
http://i36.photobucket.com/albums/e25/nexson1/2-14.jpg
Nice slippers! Those look about the same as mine. Nice and warm, eh?

Toone
01-16-2010, 12:32 PM
possibly some of the sexiest pods ive seen

Nexson
01-16-2010, 02:42 PM
One thing, your work is awesome, but holy crap! all that work to make them look stock and put them in a car that has a hole in the carpet and is unkept. those things should me in BMW 7 series ...
I understand what your saying, I just think the owner didn't clean the interior up yet because he was anxious for the install!

to me it looks thats where the footrest WAS.The owner hasn't installed the dead pedal back in yet. So yea, you are correct.


Ridiculous
again!

Nice slippers! Those look about the same as mine. Nice and warm, eh?maybe the owner can chime in on that one!


possibly some of the sexiest pods ive seenthanks! That means alot!!

supermaxx123
01-17-2010, 02:35 AM
Is it for a 3-way system?

Nexson
01-18-2010, 07:57 PM
im not sure, Ill have to ask him

ThreeMan
01-18-2010, 08:51 PM
******. Fantastic work.

bigaudiofanati2
01-22-2010, 12:39 AM
Very very nice man, I think this weekend I am going to go to a junk yard get a set and start practicing this. I have the stuff just need to work on it.

path2spl
01-24-2010, 01:36 PM
amazing. what did you use to paint them to look factory??

Alc5M
01-24-2010, 01:46 PM
Is it for a 3-way system?

I dont think so, i think thats just the factory grille, prob left the factory paper in the door and just wired these up, lol

Nexson
01-25-2010, 10:48 PM
duplicolor bedliner!

misfit138
01-26-2010, 08:57 AM
These kicks are nice, but I'd like to see more of your work...

kingkon68
01-26-2010, 11:49 PM
Sharp very sharp the best Iv seen as yet is that black spreakle paint? if I had your hands Id cut minds off

Nexson
01-29-2010, 11:36 PM
These kicks are nice, but I'd like to see more of your work...

here ya go!
My Fabrications, PART2!!!! 220+ Images, WORKLOGS! Gauges, Monitors, Painting! DSL!!! - MP3Car.com (http://www.mp3car.com/vbulletin/fabrication/126357-my-fabrications-part2-220-images-worklogs-gauges-monitors-painting-dsl.html)


Sharp very sharp the best Iv seen as yet is that black spreakle paint? if I had your hands Id cut minds off

Not a day goes by, that I am not grateful for my hands.

misfit138
01-29-2010, 11:48 PM
My Fabrications, PART2!!!! 220+ Images, WORKLOGS! Gauges, Monitors, Painting! DSL!!! - MP3Car.com (http://www.mp3car.com/vbulletin/fabrication/126357-my-fabrications-part2-220-images-worklogs-gauges-monitors-painting-dsl.html)

I tried the link 3 times with the same result; Computer locked up tighter than a nun's c*nt...

Nexson
01-31-2010, 04:14 PM
try on a different browser, I have over 220 pics of work on that thread.