PDA

View Full Version : Strange rattling noise from speaker - Turns out they are unglued aroung the edges



birdmanpresents
01-06-2010, 09:56 PM
Is this common? I had a strange noise coming from my components and when I took a look they were unglued around the edges. I guess the noise was just from them flopping around.

I was just wondering:

A) What causes this? Would it be overpowering or could it be defective material?

B) How do I prevent it from happening again?

I am in the recommended power range and gains are set correct so they shouldn't be overpowered.

ascitiesburn69
01-06-2010, 09:59 PM
if you didn't set your high pass filter correctly and you beat the hell out of them on some bassy songs then it could but I don't see them coming unglued without blowing first or having the surround rip from the cone. Unless they weren't glue correctly at the factory.

birdmanpresents
01-06-2010, 10:04 PM
^ They sounded and still sound great, I was playing them for a while thinking it was something loose in my door panel. Thats why I think it may be a defective set because they still sound fine and some more bassy song I would hear the buzz but others they still sounded amazing.

edzy
01-06-2010, 11:18 PM
what drivers?

birdmanpresents
01-06-2010, 11:21 PM
Speakers: Image Dynamics CXS64

Amp: Audison SRX 4 bridged to 2 channel at 4 ohm.

170W RMS to each speaker which are underrated and list upto 175W RMS recommended on the ID site.

So not cheap ****.

poonamt93
01-07-2010, 05:25 AM
Take the panel off to see if there are any screws loose.
but if you're in the habit of playing your music loud, you may have blown the speakers.

birdmanpresents
01-07-2010, 09:19 AM
^ I took the panels off, the skrews are not loose I already said the problem is the glue coming off around the cone and they are not blown.