PDA

View Full Version : Will this port mess with tuning a lot?



plugitin
01-04-2010, 03:19 AM
http://i86.photobucket.com/albums/k109/DaDuckyThing24/subboxnew.jpg

hmm, lemme know what you think...

SicAudio
01-04-2010, 03:22 AM
i dont see why it would

gonna be a butch to figure the tuning ( just more math is all )

Pimpdaddyq
01-04-2010, 03:27 AM
Ditto to what SicAudio said.. shouldnt effect anything.. just hopefully you can figure out what its truly tuned to.. whats the box size, tuning preference, etc?

Bumpin' Goalie
01-04-2010, 03:31 AM
Not a problem. Math might take some tedious time though. Also, make sure port width doesn't fluctuate.

schackel
01-04-2010, 03:40 AM
yes it would where L2 is the port does not have as much area as the L1

SicAudio
01-04-2010, 03:43 AM
u r right i just saw that in the drawing i missed it the first time ( i cant see 3d too well my bad )

plugitin
01-04-2010, 03:43 AM
yes it would where L2 is the port does not have as much area as the L1

this was my concern...

kind of just threw this together for a drawing, so no defined volumes yet or lengths. Its not too much of a difference...so i might go with it still

Toxic Tuan
01-04-2010, 05:11 AM
I would section it off and create a dual port. One on the top and one on the bottom separated by a horizontal MDF piece. Once you get to the turn, match the port according to its area. That will solve the problem.

Tuan

SicAudio
01-04-2010, 05:12 AM
ur a sharp one Tuan

good idea

on1wheel01
01-04-2010, 01:07 PM
I would section it off and create a dual port. One on the top and one on the bottom separated by a horizontal MDF piece. Once you get to the turn, match the port according to its area. That will solve the problem.

Tuan

this....
Seems to know his **** Tuan does

PV Audio
01-04-2010, 01:16 PM
this....
Seems to know his **** Tuan does
:slap: Thank you, Captian Obvious :)

plugitin
01-04-2010, 02:33 PM
I would section it off and create a dual port. One on the top and one on the bottom separated by a horizontal MDF piece. Once you get to the turn, match the port according to its area. That will solve the problem.

Tuan

just the guy i was waiting to hear from :)

i think i get what your saying at the turn in the port. ill draw her up a little later after work...thanks man

on1wheel01
01-04-2010, 04:29 PM
:slap: Thank you, Captian Obvious :)

blow me ;)

PV Audio
01-04-2010, 07:18 PM
blow me ;)
:laugh: I was just poking fun at you.

Toxic Tuan
01-04-2010, 11:26 PM
I'm glad i can help. :)

Tuan