PDA

View Full Version : 1400wGTP box build for hdc315



AllDayMJ
01-03-2010, 09:49 PM
did this some time ago, only had phone pictures of the build. i believe it is 4.4 cubes tuned to 38.5hz and 56sq.in. of port.. i decided to have the ports extend into the trunk due to the lack of airspace for the 15.
http://img31.imageshack.us/img31/7915/0629092229.jpg
cutting the ports to length from the 10' section
http://img39.imageshack.us/img39/7563/0630091735.jpg
glassed the inside and braced with 2x 2x4s
http://img63.imageshack.us/img63/8347/0702091541.jpg
removable ports, these are the 38.5hz daily ports
http://img32.imageshack.us/img32/8576/0702091541a.jpg http://img189.imageshack.us/img189/3425/0702091541b.jpg http://img31.imageshack.us/img31/6632/0702091541c.jpg http://img85.imageshack.us/img85/9266/0702091541d.jpg http://img46.imageshack.us/img46/954/0702091542.jpg http://img31.imageshack.us/img31/9194/0702091547.jpg http://img39.imageshack.us/img39/9272/0702091548.jpg
did about 2-3 layers of glass..used a ton of resin, my dad did have a 500gal drum so i think it was about 3 gallons though. good thing it was winter resin so it set up quick with a little added heat.

AllDayMJ
01-03-2010, 09:51 PM
http://img691.imageshack.us/img691/4652/0702091942.jpg
all finished up, rounded corners. any finish would have been ruined when it was put in so it was left bare mdf.
http://img39.imageshack.us/img39/8175/0722091115.jpg
HDC315 copper coils with new suspension
http://img39.imageshack.us/img39/3388/0722091115a.jpghttp://img189.imageshack.us/img189/4066/0722091118.jpg http://img85.imageshack.us/img85/6601/0722091141.jpg
PowerBass ASA1500.1d 1500w RMS @1ohm
http://img63.imageshack.us/img63/6358/0722091141a.jpg

Pimpdaddyq
01-04-2010, 04:51 AM
Looks good and exciting.. Cant wait til finished pics..

thorshammer1
01-04-2010, 10:36 AM
Look forward to seeing pics in car :)