12-31-2009, 11:28 AM
I'm planning to do a bandpass in the bed of my 89 s-10. I have 2 t3 tss 10's to use and a mm4000.1. I'm not sure if these subs work well in a bp, anyone have any experience with them. If I don't use them I'm going to do 2 12's but I'm unsure which brand will work in this set up. The design that I was thinking was 2cu ft for the sealed(for 10's) or 3cu ft(for 12's) and that will leave me about 9 cubes to play with for the front chamber and port. I was thinking tuning to 45hz with about 180sq in of port. This set up will be mostly for local comps but maybe I can make the port interchangable for some daily listening. Any help, thoughts, or tips would be greatly appreciated. This will be my first bp build by the way and I'm looking forward to doing it just need some insight.