PDA

View Full Version : Enclosure Build For SubinNCali



DonH
12-23-2009, 06:07 PM
Alright box is 2.5ft^3 @ 32hz after all displacement with 30in^2 of port. Driver is a custom 12"

Pics:

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4380.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4382.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4383.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4384.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4388.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4385.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4389.jpg

have more pics just have to go to work :( will post when on my lunch break

DonH
12-23-2009, 06:08 PM
reserved:

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4390.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4392.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4393.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4395.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4394.jpg

http://i368.photobucket.com/albums/oo125/don_hampton90/100_4396.jpg

DonH
12-23-2009, 06:08 PM
reserved#2

Twisted_0912
12-23-2009, 06:11 PM
lookin good

salone
12-23-2009, 08:10 PM
Nice work.

DB-Audio
12-23-2009, 09:52 PM
nice job so far don great chraftsmanship

Mike465
12-23-2009, 10:48 PM
Looking good man :)

DonH
12-23-2009, 11:20 PM
new pics up.

and thank you to everyone for the comments!

Pioneer~Saturn
12-24-2009, 12:21 AM
Lookin good

mobileaudio219
12-24-2009, 12:30 AM
Yep, Looks good!

DonH
12-24-2009, 04:01 AM
thanks guys wish i could work at a shop doing this instead of working at rite aid! FTL!

James Bang
12-24-2009, 11:42 AM
Did you sand the paint off where the port wall meets the bottom piece? It doesn't look like you did.

DonH
12-24-2009, 04:18 PM
Did you sand the paint off where the port wall meets the bottom piece? It doesn't look like you did.

actually yes i did :D

James Bang
12-24-2009, 05:56 PM
Good. The pic below is why I mentioned it. It's a good thing you sanded the paint off, because wood glue bonds wood to wood, and not wood to paint :) Good stuff.




http://i368.photobucket.com/albums/oo125/don_hampton90/100_4396.jpg

SubbinNCali
12-24-2009, 06:59 PM
Looking good! Can't wait until Saturday!

DonH
12-25-2009, 02:35 AM
Looking good! Can't wait until Saturday!

yeah man! have a merry Christmas :veryhapp:!

Highs on bass
12-25-2009, 02:53 AM
Question I've seen alot of ppl build a bunch of boxes. and they spend all the time doing 45's. Yet I see one area where no one does the 45 cut. If you look on the outside walls you have 45's. But at the last turn for the port on its way out of the box. There is a 45 on that wall but the inside wall where the subs chamber is. Its a 90. Kinda pointless. If you have all these 45's but at the point where you will have a large air load there is that nasty little 90 degree that loads up everything. Why not make that a 45 as well?

DonH
12-25-2009, 03:37 AM
Question I've seen alot of ppl build a bunch of boxes. and they spend all the time doing 45's. Yet I see one area where no one does the 45 cut. If you look on the outside walls you have 45's. But at the last turn for the port on its way out of the box. There is a 45 on that wall but the inside wall where the subs chamber is. Its a 90. Kinda pointless. If you have all these 45's but at the point where you will have a large air load there is that nasty little 90 degree that loads up everything. Why not make that a 45 as well?

are you talking about the inside of the port?

also 45's in every corner can REDUCE teh output of a box by not allowing the proper loading of the sub woofer if you did not know.

DonH
12-28-2009, 07:28 PM
box was finished forgot pics :(