PDA

View Full Version : what box to go with Pioneer Premier TS-W3002D2



xgallegos4
12-22-2009, 01:36 AM
i have 2 Pioneer Premier TS-W3002D2 12's how big of a box should i go with and ported or sealed? and what should it be tuned to? and which would be the best wood to have it built

SSS 18734
12-22-2009, 02:09 AM
Stay away from sealed enclosures for these.

Depending on the amount of space you have to work with and your desired tuning, do between 2.2 and 3 cubic feet per woofer, with approximately 35-45 cubic inches of port, tuned between 32 and 38 (depending on your listening preferences).

The standard box-building material is MDF.

xgallegos4
12-22-2009, 02:24 AM
if it helps its going to be in a 2001 impala

jchancellortool
01-02-2010, 01:22 AM
I had 2 of these powered by a Orion 2500d @ .5 ohm in a 3.2 cube box tuned to 32hz.. They slammed and sounded great but needed a bigger box. If I were to do it again I would do 5 cubes tuned to 36hz

bassman2000
01-03-2010, 08:04 PM
I would stick with a vented design for those woofers. Specifically check out www.atrendusa.com. Atrend has a part number 12DVR that would work very nice with these.

xgallegos4
01-03-2010, 09:08 PM
any box designers?
bump

gsuchyta
01-03-2010, 09:19 PM
sendin you a pm right now

xgallegos4
01-03-2010, 10:19 PM
thanks gsuchyta anyone else i want a few box plans to choose from anyone????

gsuchyta
01-03-2010, 10:23 PM
I will let everyone know the max dimensions for those impala trunks 00-05 is width 36" height 17" and depth 22"
With those dimensions you have to shave two spots on the edges to get it to squeeze in there but with 16.5" height you should be fine.

Came out to 4.9 cubes net at 35 hz. 67.5 square inches port area. Should work fine as thats the biggest box your goin to be able to fit in there

xgallegos4
01-03-2010, 10:24 PM
thanks
bump