PDA

View Full Version : Skip01: So Fresh So Clean, Clean rebuild



Skip01
12-10-2009, 11:54 AM
Well its that time again.....time for me too do it again.

But this time, im doing it alll right:rolleyes:...well, right for me:D

So this is where i started:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2815.jpg

Just yuck.....wires everywhere...just looks a mess

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2820.jpg

Heres what all was back there:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2819.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2825.jpg

Heres the mess under the hood....semi clean it up, gonna get a Powermaster D3400 for under there in a bit:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2821.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2822.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2823.jpg

Skip01
12-10-2009, 11:54 AM
Well...i started out too change my sunvisor plastics....and ended up taking whole headliner off...you know, while i had the sunvisor plastics already off :laugh::

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00097.jpg

1 layer of Damp Pro...helped out a bunch on low end;)

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00098.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00100.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00099.jpg


So now...the clean up gets going....as you can see here, all my setups consisted of the highs amp being here, it ***** up like 3inches of my spaceeee:

http://i63.photobucket.com/albums/h136/DatDudeBL/My%20Setups/HPIM1761.jpg

So looking at all others making false floors and such....i just went 1 step before a false floor:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2888.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2889.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2890.jpg

Skip01
12-10-2009, 11:54 AM
Ahhhhhh.....a blank canvas:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2908.jpg

Well...thats where it sits now....gonna add a fan down there afterwhile, but winter is coming so i should be good for now.

Heres some stuff needing too go in.

Gonna run 2 Power and 2 Grounds front to back....FINALLYYYY:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2906.jpg

Been charging batts nightly.....got them resting at 13.1 now:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2907.jpg

So guess ya been asking ....what subs ya bastarddd :D:

Well basically they are Nightshades...with diff basket, cone, and spider config...:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG_2067.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG_2069.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG_2073.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG_2068.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG_2075.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG_2079.jpg

Skip01
12-10-2009, 11:54 AM
So i think thats it....guess i shoulda posted a list of equipment in 1st post, but ill do that here:


2 15" Shades(aka W7s)
2 AQ or Sundown 3500s
4 D3100s
1 D3400
7cu @ 32hz

Now yall seen the box.....funky right haha, well heres the finishing touch going on the dustcaps:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM2909.jpg

hahaha...when anyone asks "What subs ya got back there"

2 15 W7s :wow::wow:


Big thanks too JBLCamry, BJFish, TeamPSI,...and last and CERTAINLY....THE LEASTTTTTT:

SSACKETT

Ya homo


SEACREAST....OUTTTT

Skip01
12-10-2009, 12:25 PM
Box is here if some didnt see:

http://www.caraudio.com/forum/showthread.php?t=447487

na_rsx
12-10-2009, 12:28 PM
get started on it nao, i wanna see this

brmcm15
12-10-2009, 12:33 PM
get started on it nao, i wanna see this

x2 looks interesting.

**** nightshades

Skip01
12-10-2009, 12:35 PM
get started on it nao, i wanna see this

ha i hear that.


I need too order some grommets too run my 1/0 through, and a spool of kicker grey.

But it should be all done in maybe a month or 2, still need amps too :crap:

rival904
12-10-2009, 12:36 PM
Sometimes, I enjoy tearing everything down and re-doing it all cleaner.

Skip01
12-10-2009, 12:38 PM
Sometimes, I enjoy tearing everything down and re-doing it all cleaner.

Yeh....i figured id make this one pretty kinda, try and hide most the wires and stuff.

mobeious
12-10-2009, 01:53 PM
still going to b gay

JBLCAMRY
12-10-2009, 01:59 PM
still going to b gay

yep

Skip01
12-10-2009, 02:47 PM
Well it is PINKKKKKK

psychoacoustics
12-10-2009, 02:49 PM
im liking the woofers did david do that for ya?

Skip01
12-10-2009, 02:58 PM
im liking the woofers did david do that for ya?

No....that was SSACKETT

snfsh79077
12-10-2009, 03:33 PM
What happened to the smaller subs thing? christmas break is a day away so if you need any help let me know.

basshedz06
12-10-2009, 05:43 PM
shiitttt this fool will have another setup back in this thang after a month of this setup this man change setups like i change draws lol looking good bro hope to see this setup at scrapin this year since you didn']t show ya *** at last years.

bamaboy
12-10-2009, 05:54 PM
oh ****...i think its time for me to start post whoring

2nd note, i like those baskets

3rd note, i skimmed fast but did you put more than 1 layer up or what, i just read one layer and carried on

4th, you is a bish

5th, when is box going to be arriving?

6th, what drugs you selling this week?

7th, what POS carryover sub are you using back there?

8th, im glad im not working on my **** still



that is all, keep the pics coming

Skip01
12-10-2009, 07:04 PM
oh ****...i think its time for me to start post whoring

2nd note, i like those baskets

3rd note, i skimmed fast but did you put more than 1 layer up or what, i just read one layer and carried on

4th, you is a bish

5th, when is box going to be arriving?

6th, what drugs you selling this week?

7th, what POS carryover sub are you using back there?

8th, im glad im not working on my **** still



that is all, keep the pics coming

Just 1 layer up there

Box, dk, BJ had too order more port tubes cuz didnt have enough too make 20"

No drugs, actually been slacking this week...took off.

Its getting rough having too full time projects going on.....too money pits :crap:

Mannn...believe it or not, i have NOTHING back there haha....im bassless at the moment

Skip01
12-10-2009, 07:05 PM
What happened to the smaller subs thing? christmas break is a day away so if you need any help let me know.

I need too get some air moving back there :D


Will do, i gotta wait for my grommets too come in

SSS 18734
12-10-2009, 07:10 PM
Love the way those subs look. Looks good so far!

Skip01
12-10-2009, 07:12 PM
Love the way those subs look. Looks good so far!

Yeh....i asked Scott for something different than just the normal 12 spoke that everyone has.

Wanted em funky...even though no one would see em

-Leister-
12-10-2009, 07:20 PM
Diggin the subs.

snfsh79077
12-10-2009, 07:33 PM
I need too get some air moving back there :D


Will do, i gotta wait for my grommets too come in

I have a fan you can use :D

ktraughb
12-10-2009, 07:37 PM
if i were you i would get those batteries off that floor (looks like a concrete floor in the pic). ive always heard concrete can discharge your bat. ive not tested this and always just put a piece of wood under to be safe. i could be completely wrong, but i like to be safe.

Skip01
12-10-2009, 07:42 PM
if i were you i would get those batteries off that floor (looks like a concrete floor in the pic). ive always heard concrete can discharge your bat. ive not tested this and always just put a piece of wood under to be safe. i could be completely wrong, but i like to be safe.

There ya go ;)

mxer657
12-10-2009, 07:43 PM
if i were you i would get those batteries off that floor (looks like a concrete floor in the pic). ive always heard concrete can discharge your bat. ive not tested this and always just put a piece of wood under to be safe. i could be completely wrong, but i like to be safe.

fyi: that is outdated..

You see, the myth that concrete drains batteries does have some historical basis. Many, many years ago, wooden battery cases encased a glass jar with the battery inside. Any moisture on the floor could cause the wood to swell and possibly fracture the glass, causing it to leak. Later came the introduction of the hard rubber cases, which were somewhat porous and had a high-carbon content. An electrical current could be conducted through this container if the moist concrete floor permitted the current to find an electrical ground. The wise advice of the old days to "keep batteries off concrete" has been passed down to us today, but it no longer applies because of the advanced technology of today’s batteries.

ktraughb
12-10-2009, 07:55 PM
i thought that could be the case with the rate that batteries have changed in the last ten years. but thats also why i said ive not tested it personally. but then again, an expensive battery is not something that is fun to test out such a myth, which is why i always just trusted that myth in stride. thanks for the update.

Skip01
12-10-2009, 11:50 PM
yep....just a myth.

2003F150
12-11-2009, 09:46 AM
shiitttt this fool will have another setup back in this thang after a month of this setup this man change setups like i change draws lol looking good bro hope to see this setup at scrapin this year since you didn']t show ya *** at last years.

He always has an excuse of why he didnt show at scrapin'.....getting old skip...he always has to "work" ha have to give him a hard time. By the way that basket is nice on that sub.

2003F150
12-11-2009, 09:46 AM
shiitttt this fool will have another setup back in this thang after a month of this setup this man change setups like i change draws lol looking good bro hope to see this setup at scrapin this year since you didn']t show ya *** at last years.

He always has an excuse of why he didnt show at scrapin'.....getting old skip...he always has to "work" ha have to give him a hard time. By the way that basket is nice on that sub.

Skip01
12-11-2009, 11:43 AM
He always has an excuse of why he didnt show at scrapin'.....getting old skip...he always has to "work" ha have to give him a hard time. By the way that basket is nice on that sub.

Mannn...i was ready for last year too, had just got my SB2 setup ready and all.

Ill have something this year, not this, prolly throw another SB2 setup in...or SB1

bamaboy
12-17-2009, 01:19 PM
this is getting out of hand, i found this POS thread on page 2, where are the updates?

embarrassing

mobeious
12-17-2009, 01:53 PM
i think he is still learning how to crimp wire .. this might take a while

Skip01
12-17-2009, 01:58 PM
When either of you reach my 4 12 scores, please do continue too talk.

DB-Audio
12-17-2009, 04:21 PM
nice so far the box looks nice but why the pink plad?

bamaboy
12-17-2009, 06:37 PM
:cough:bitchass:cough:

but furrealz i do need some updates here

and whats your best legal score to date?

dont give me that amp at .125ohm measured in the kick junk

Skip01
12-17-2009, 07:33 PM
nice so far the box looks nice but why the pink plad?

Why not ;)


:cough:bitchass:cough:

but furrealz i do need some updates here

and whats your best legal score to date?

dont give me that amp at .125ohm measured in the kick junk

I never really tested legal too much, only like once on not charged batts or what not.

154.7
156.1 kick.

Id say i had a 55 legal in it, cuz all my legal too kick scores are only 1db difference.

That was amps at .5, how i played it daily.

Swear, that freaking setup was painful all sealed up , i couldnt ride in it full tilt, and gf didnt enjoy her hair being messed up....sealed up too :D

mobeious
12-17-2009, 09:25 PM
When either of you reach my 4 12 scores, please do continue too talk.



:cough: :cough: who built the box :cough: :cough

snfsh79077
12-18-2009, 01:22 AM
Why not ;)



I never really tested legal too much, only like once on not charged batts or what not.

154.7
156.1 kick.

Id say i had a 55 legal in it, cuz all my legal too kick scores are only 1db difference.

That was amps at .5, how i played it daily.

Swear, that freaking setup was painful all sealed up , i couldnt ride in it full tilt, and gf didnt enjoy her hair being messed up....sealed up too :D

I'm jealous that yours is loudest sealed up.

Skip01
12-18-2009, 09:21 AM
:cough: :cough: who built the box :cough: :cough

I paid some hobo in triple A batteries too throw it together

2003F150
12-18-2009, 09:37 AM
Yes Skip had a nice setup with the 4 Aq hdc3 12's and 2 amercan bass 500.1's. It had more in it for sure but it was a box built by bj fish and was mostly a daily box. It also helps skip has a very good vehicle to use LOL

bamaboy
12-18-2009, 10:05 AM
i forgot it was 2 500.1s, thats dosent count, what were they running at?

Snow90
12-18-2009, 04:29 PM
I need too get some air moving back there :D


Will do, i gotta wait for my grommets too come in

Where did you get your grommets from? just wondering.

I'm looking to order some for my truck too. 2 power and 2 ground also.

2003F150
12-18-2009, 05:00 PM
He was at .5 ohm a piece on the Ab500.1's

95BlackGA
12-18-2009, 05:19 PM
Honestly, box looks like ****. You might as well throw it out. Well, if you're just throwing it out, just go ahead and give me PP info and I'll pay for shipping here...










:sneaky:

mobileaudio219
12-18-2009, 06:14 PM
Lookin good!

bamaboy
12-18-2009, 06:52 PM
He was at .5 ohm a piece on the Ab500.1's

get that **** out of here...

Skip01
12-18-2009, 07:14 PM
get that **** out of here...

Its called LOUDNESS sir.


Get in line with ur 48s with 2 18s.

I did that **** with 2 12Rs.

Also was doing 153s with 4 Rs and 1 40.1, and 52s with same and 200.1, and 151s with 4 10Rs and 2 2200s, and 149s with 1 12.

Comeon now son, we have the same vehicles and you wayyyyy off :rolleyes::rolleyes:

Step ya game up

And 2003F150 has a wall....hahaha, and barelyyyyy does a 60.....get outta here

Skip01
12-18-2009, 07:15 PM
Where did you get your grommets from? just wondering.

I'm looking to order some for my truck too. 2 power and 2 ground also.

Havent got mine yet....but im prolly gonna get these:

http://www.darvex.com/PG34/0+Gauge+Pro+Grommet.html

basshedz06
12-18-2009, 07:31 PM
Its called LOUDNESS sir.


Get in line with ur 48s with 2 18s.

I did that **** with 2 12Rs.

Also was doing 153s with 4 Rs and 1 40.1, and 52s with same and 200.1, and 151s with 4 10Rs and 2 2200s, and 149s with 1 12.

Comeon now son, we have the same vehicles and you wayyyyy off :rolleyes::rolleyes:

Step ya game up

And 2003F150 has a wall....hahaha, and barelyyyyy does a 60.....get outta here

that an plus its called box effiency also bro lol.
cause it is obvious that you found what your truck likes an it works with your setup also you can't build a wall in a truck an expect for it to be loud you have to work at it. if you have a wall with some 18's an only doing mid 40's with yur setup its obvious its not a sub or amp problem but a box problem man. if your box isn't effiecient enough you won't do the score you want to do or expect to do.

bamaboy
12-19-2009, 11:52 AM
Its called LOUDNESS sir.


Get in line with ur 48s with 2 18s.

I did that **** with 2 12Rs.

Also was doing 153s with 4 Rs and 1 40.1, and 52s with same and 200.1, and 151s with 4 10Rs and 2 2200s, and 149s with 1 12.

Comeon now son, we have the same vehicles and you wayyyyy off :rolleyes::rolleyes:

Step ya game up

And 2003F150 has a wall....hahaha, and barelyyyyy does a 60.....get outta here
hey hey...
the 18s would do a 50.x on music, i havnt played a test tone on my stuff since i had mt's a long time ago,any score i ever post is using music, im not a meter person

type R's are just loud, we know

UPDATES!!!!

quit tingling type R's nuts and get me some new pictures:emb:

Skip01
12-19-2009, 03:10 PM
Did you ever even post a vid of ur 4 12s, that weak huh?

Ill have 2 pics up today.

bamaboy
12-19-2009, 03:46 PM
i say im gonna do it everytime i come back home, but i never end up doing it, been nasty here lately with rain and such, i want to try and get one over the break, we'll see:(

Skip01
12-20-2009, 11:49 AM
Same here...its cold, windy and had record rains last few days, weeks even ha...heres some pics:

Got my Mechman 250 back from repair...:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00277.jpg

My silcone-bronze hardware:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00276.jpg

Tell people whats up:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00166.jpg

And my lil lady updated my frog:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00274.jpg

hempy
12-20-2009, 04:09 PM
Same here...its cold, windy and had record rains last few days, weeks even ha...heres some pics:

Did y'all flood last week?

Skip01
12-20-2009, 07:00 PM
Did y'all flood last week?

No, our area is pretty good for being on teh westbank.

It got up pretty high in our driveway though

Skip01
12-27-2009, 07:57 PM
Ordered stuff today.......that is all

connersdad19
12-29-2009, 04:08 PM
moar pics...

2003F150
12-30-2009, 05:37 PM
Mine barely does a 160 that you wont sit in lol.....funny ****(and yes I know your kidding with me)

Skip01
12-30-2009, 09:23 PM
Got this in today....:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3024.jpg

Call me stupid....but how do these work?

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3027.jpg

Im assuming the left part goes inside the engine bay, and than tighten the nut down, than the rounded side goes into car?


Man....im gonna miss putting stuff in my hatch area now haha, soooo much room

mobeious
12-30-2009, 10:59 PM
lol

bamaboy
12-30-2009, 11:00 PM
gtfo tard...

dvldogyut
12-30-2009, 11:16 PM
what kind of baskets do your subs have they look good?

dvldogyut
12-30-2009, 11:21 PM
Call me stupid....but how do these work?

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3027.jpg

Im assuming the left part goes inside the engine bay, and than tighten the nut down, than the rounded side goes into car?

i think they go the other way because you will see it more from under the hood than laying down to look at them under the dash

Skip01
12-31-2009, 12:12 AM
lol

Cuz you dont know


gtfo tard...

Same here.....doesnt have a clue

Skip01
12-31-2009, 12:16 AM
what kind of baskets do your subs have they look good?

Special SSackett brand ;)

hempy
12-31-2009, 12:49 AM
Other way around with the grommet. You want the sealing end to be in the engine bay.

Skip01
12-31-2009, 02:01 AM
Other way around with the grommet. You want the sealing end to be in the engine bay.

And i tighten it down with the nut on the inside of car?

smoka
12-31-2009, 02:02 AM
Doesn't really matter which way you mount the grommets. What really matters is that you have the room to tighten the sealing end.

My Hemi didn't leave me much room so I put my round ends inside the dash.

http://i24.photobucket.com/albums/c19/smokey77/Trunk/DSCN0928.jpg

Skip01
12-31-2009, 02:21 AM
Doesn't really matter which way you mount the grommets. What really matters is that you have the room to tighten the sealing end.

My Hemi didn't leave me much room so I put my round ends inside the dash.

http://i24.photobucket.com/albums/c19/smokey77/Trunk/DSCN0928.jpg

So tighten the rounded end all the way?

smoka
12-31-2009, 02:27 AM
Take off rounded part. Put the grommet through the firewall and tighten the nut. Then loosely put the round end back on. Then run the wire through. Finally tighten the round end (this part is what weatherproofs it).

mobeious
12-31-2009, 10:04 AM
Cuz you dont know



i have one in my truck lol

bubbagumper6
12-31-2009, 10:06 AM
I like those grommets...where'd you buy em?

EDIT: and are they metal or plastic?

Mookie
12-31-2009, 10:13 AM
Looks good. More pics!

Skip01
12-31-2009, 11:22 AM
I like those grommets...where'd you buy em?

EDIT: and are they metal or plastic?

Plastic

And here:

http://www.darvex.com/PG34/0+Gauge+Pro+Grommet.html

mobeious
12-31-2009, 11:44 AM
cod?

Skip01
12-31-2009, 12:30 PM
cod?

I was just on raping sir.

snfsh79077
01-09-2010, 04:23 PM
hows everything going skip? I finally got all my **** installed and I'm now peaking at 28hz :crazy: I still have a week until the semester starts if you need any help running wire.

Skip01
01-13-2010, 01:25 PM
hows everything going skip? I finally got all my **** installed and I'm now peaking at 28hz :crazy: I still have a week until the semester starts if you need any help running wire.

Yeh i seen that.....my old Civic was like that, but 36hz....it was still one of my fav setups.


Im waiting til it gets a tad warmer too start running the wire...and still figuring it out in my head how i wanna do it ha :crap:

Skip01
01-13-2010, 01:56 PM
Shipping DAYYYY:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3040.jpg


Just a lil peak:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3041.jpg

BAM:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3042.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3043.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3044.jpg

Anddddd.........:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3045.jpg

Box came in too:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3046.jpg



Gay thing is, 2 subs was shipped at once, but yet one arrives before the other haha....genius move on FedEx.

Im blameing it solely on SSackett though......its one of his dirty lil schemes, i know it

Canaan
01-13-2010, 04:41 PM
http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3027.jpg



I like these grommets, but dam...$6.50 each at cost and $8.99 retail?.

Not a chance I could sell these in the shop. I use the HELL out of pop-in plastic one though, I always put a ring of hot-glue on them so it bleeds thru the drilled hole and really locks into place.

Nice build.

snfsh79077
01-13-2010, 07:15 PM
Yeh i seen that.....my old Civic was like that, but 36hz....it was still one of my fav setups.


Im waiting til it gets a tad warmer too start running the wire...and still figuring it out in my head how i wanna do it ha :crap:

I need more power because with imp rise my sub is laughing at the power lol I want to see if I can break into the 40s that low. Would be a lot of fun lol.

Yea its been super cold but today was actually a good day. After school starts I should still be available on weekends.

Skip01
01-24-2010, 10:04 PM
Getting amps next week most likely.....lil surprise....hehe

TheFiverMan
01-25-2010, 09:49 AM
Looking good.

Skip01
01-30-2010, 06:33 PM
Got 1 of 2 amps today......i heard both the subs make a "Eekkk" noise..hehe:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3064.jpg

Wow....nice and doubled boxed:


http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3065.jpg


Scratch that.....TRIPLE BOXED:



http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3066.jpg


Hey there beautiful.......heres looking at you:



http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3067.jpg


Bit dusty.....ill towel her off:


http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3068.jpg


http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/HPIM3069.jpg


Getting the other one prolly in a week or 2, but ill have setup up and running at 1ohm on 1 amp by next week.

SEACREST OUTTTTT

Skip01
02-06-2010, 06:54 PM
Well....after many fails with a hole saw...i manned up and bought this step-up bit...50 bucks...jebus:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00381.jpg


Got 1 done and another ready:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00382.jpg

My weapons of choice:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00383.jpg

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00384.jpg

Andddd.....with no more pics taken, haha:

http://i63.photobucket.com/albums/h136/DatDudeBL/Skip01%20REBUILD/IMG00386.jpg


Amp powers on, rcas in....box in, started getting cold...ill knock out subs tomorrow....playing and alll

Eugenics
02-06-2010, 07:08 PM
Lookin good

mobeious
02-06-2010, 09:37 PM
looks gangster

BassnVW
02-06-2010, 09:45 PM
Did JBLCAMRY design that box for BJ? looks good by the way!

jdmferio13
02-06-2010, 09:52 PM
are those the raptor 3/8 1/0 guage ring terminals.where did you get them

Skip01
02-06-2010, 10:10 PM
are those the raptor 3/8 1/0 guage ring terminals.where did you get them


Yeh...3/8th and i believe eBay.....its been a while, cant remember

Andrew12
02-09-2010, 02:20 AM
moAr!

spltuscon
02-09-2010, 04:56 AM
You'll love the D9...its a great amp and you can really abuse the hell out of it. I've been running mine at .25 for a few days on a SS-XXX15 for testing and it's totally stable for burps and stable on music almost full tilt. It really comes alive under 1 ohm :)

Skip01
02-21-2010, 09:04 PM
Teaser vid uploading

na_rsx
02-22-2010, 09:19 AM
hurry

mobeious
02-22-2010, 10:09 PM
epic fail ... he forgot to post the video

Skip01
03-03-2010, 02:01 PM
Im never on this site since the look change:

YouTube - 2 Custom 15s and 1 RD D9 (http://www.youtube.com/watch?v=ynv74kR2V9I)

mobeious
03-03-2010, 02:10 PM
weak

Skip01
03-18-2010, 09:37 PM
YouTube - 15s Bizzle (http://www.youtube.com/watch?v=83-QYstR_fw)

ascitiesburn69
03-18-2010, 09:47 PM
Nice^^^
Check your **** Text messages feggg...

WhiteIce
03-18-2010, 10:00 PM
Canes FTMFW!

Skip01
03-19-2010, 09:38 PM
Canes FTMFW!

That had been in there overnight haha, i forgot it when i took the bag in...bastards

Skip01
03-19-2010, 09:38 PM
Nice^^^
Check your **** Text messages feggg...

You check ur saturn......ohhhhhhhhh