PDA

View Full Version : 4 nighshade 18s yukon xl build 155+ 16v minus the bullshit



godhatescivics
12-06-2009, 07:52 PM
as the truck sits now
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10448.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10485.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10486.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10487.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10488.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10490.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10491.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10492.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10493.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10494.jpg

godhatescivics
12-06-2009, 07:54 PM
buss bar for the 7 16vs
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10495.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10496.jpg

Villeza1
12-06-2009, 07:54 PM
Whoa hoo!! Finally!

godhatescivics
12-06-2009, 07:56 PM
some videos
http://i377.photobucket.com/albums/oo213/andrewsowinski/th_SDC10447.jpg (http://s377.photobucket.com/albums/oo213/andrewsowinski/?action=view&current=SDC10447.flv)
http://i377.photobucket.com/albums/oo213/andrewsowinski/th_SDC10449.jpg (http://s377.photobucket.com/albums/oo213/andrewsowinski/?action=view&current=SDC10449.flv)

godhatescivics
12-06-2009, 08:09 PM
and more
http://i377.photobucket.com/albums/oo213/andrewsowinski/th_SDC10483.jpg (http://s377.photobucket.com/albums/oo213/andrewsowinski/?action=view&current=SDC10483.flv)
http://i377.photobucket.com/albums/oo213/andrewsowinski/th_SDC10482.jpg (http://s377.photobucket.com/albums/oo213/andrewsowinski/?action=view&current=SDC10482.flv)
http://i377.photobucket.com/albums/oo213/andrewsowinski/th_SDC10481.jpg (http://s377.photobucket.com/albums/oo213/andrewsowinski/?action=view&current=SDC10481.flv)

godhatescivics
12-06-2009, 08:16 PM
will have 7 16vs with quater inch buss bar with a 16v under the hood

Cabin_Pressure
12-06-2009, 08:19 PM
Who ran the 1/0?

godhatescivics
12-06-2009, 08:20 PM
me lol

godhatescivics
12-06-2009, 08:21 PM
been there over a year with no problems

plugitin
12-06-2009, 08:21 PM
Who ran the 1/0?

almost looks like the tire would rub on it when turned to the left...

godhatescivics
12-06-2009, 08:22 PM
the box will be built this week and install as soon as subs and saz 4500s show up

godhatescivics
12-06-2009, 08:23 PM
na its fine there was no where to run it with the 4x4

AudioXtremes
12-06-2009, 08:24 PM
Strange looking nightshades.

godhatescivics
12-06-2009, 08:26 PM
there not here yet or the 4500s people wanted to see what was in it now so there you go

godhatescivics
12-06-2009, 08:32 PM
battries and buss bars will be in tommorrow alts ill be getting stepped up and ext regulated this week

Cabin_Pressure
12-06-2009, 08:37 PM
been there over a year with no problems

Been LUCKY for a year. That's a good way to short a charging system. I have a 4x4 Expedition, mine follows the same route, doesn't look anything like that ghetto **** though. I have mine in flex loom and then a hightemp heat sleeve grouping the runs together. Then it is strapped to the frame runners every foot or so.

basebalz13
12-06-2009, 09:43 PM
what you doing with the 4 15's???


tuned in for results sorry about the old thread

gtbike900
12-06-2009, 09:44 PM
need to make some better vids going to have to use a better camera its not picking up the flex get more vids up tomorrow plus vids with my term lab

gtbike900
12-06-2009, 09:45 PM
selling them there mint on like 900 rms right now a peice

gtbike900
12-06-2009, 09:47 PM
Been LUCKY for a year. That's a good way to short a charging system. I have a 4x4 Expedition, mine follows the same route, doesn't look anything like that ghetto **** though. I have mine in flex loom and then a hightemp heat sleeve grouping the runs together. Then it is strapped to the frame runners every foot or so.

let it burn it got 10000 coverage on sound and blue book is like 15500 on it right now i got 9600 cash when i got car jacked in akron

CranberryYumYum
12-06-2009, 10:07 PM
hey op you're silly. thinking tcs are nightshades psh. those are my subs anyhow

basebalz13
12-06-2009, 11:36 PM
price for the 15's? picked up

grimreper912003
12-06-2009, 11:38 PM
That a kenwood deck?

profundus-sanus
12-06-2009, 11:43 PM
can i haz teh axis?

CranberryYumYum
12-06-2009, 11:43 PM
price for the 15's? picked up

x2

godhatescivics
12-06-2009, 11:57 PM
idk ill ask him

sub-FATHER
12-07-2009, 12:04 AM
I COME IN PEACE?


so is this gonna have a back seat when your done?

big_Edge_head
12-07-2009, 12:29 AM
Looks like you should replace your tires.

Snow90
12-07-2009, 12:33 AM
Hmmm TC Sound Axis?

er do you mean TC-3000.

gtbike900
12-07-2009, 12:39 AM
no axis with tc cones direct from tilo and it a peace of sh1t jvc arsenal that the screens broke and has spliters off the only working rcas witch are front my flip out got stolen wile it was inpounded for 4 months and my tires are funked i know first let me fix the wheel bearing thats clankin when i turn 90 mph wall drunk = broken wheel bearing lol

gtbike900
12-07-2009, 12:41 AM
the third rows in my old house the the buckets are staying i could get 25 cube and 10 batts and 3 amps back there its an xl

godhatescivics
12-07-2009, 01:11 AM
x2

hows 1300 sound no dents or scatches

Snow90
12-07-2009, 11:48 AM
hows 1300 sound no dents or scatches

pretty decent price IMO. But splitting up?

ThunderCat95
12-07-2009, 12:13 PM
1/0 routing fail.

DB-Audio
12-07-2009, 01:38 PM
good job man looks nice

gtbike900
12-07-2009, 07:20 PM
i will split them up for 340 a peice

TurdFergueson2
12-07-2009, 07:24 PM
Is that below window line?

godhatescivics
12-07-2009, 09:30 PM
yes its a ss no wall truck

NeverEnuffBass
12-07-2009, 10:01 PM
as the truck sits now
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10494.jpg

:wow:

gtbike900
12-07-2009, 10:35 PM
batts are in will get pic when is not dark out and hopefully term lab it tomm if the local shops not bizy to loud to mic around here tweaked the box position today to and i have to turn the volume down to read highway signs blurs vision picking up alts tomm and dropping them off to be stepped up and externaly regulated should be fully operational by thursday if i can ever get off work in time to get to the shop

gtbike900
12-07-2009, 10:36 PM
and nightshades and 4500s are going to be here for sure next weekend yay

CranberryYumYum
12-07-2009, 11:37 PM
i'm being torn up inside :'(

sub-FATHER
12-08-2009, 09:53 PM
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10494.jpg[/QUOTE]

:eek:this guy really know what he's doing!:bowdown:

Can I have your advice?:hilariou:

sub-FATHER
12-08-2009, 09:55 PM
for real though, is there gonna be anything being built here. so far all i've seen is an old set up.

18inchjeepin
12-08-2009, 09:56 PM
better than nothing

sub-FATHER
12-08-2009, 09:57 PM
better than nothing

what do you mean?

18inchjeepin
12-08-2009, 10:00 PM
pics are better than ppl bichering at each other

sub-FATHER
12-08-2009, 10:05 PM
pics are better than ppl bichering at each other

yeah... to bad these are not even pics of the build they are talking about building.

profundus-sanus
12-08-2009, 10:08 PM
the box will be built this week and install as soon as subs and saz 4500s show up


yeah... to bad these are not even pics of the build they are talking about building.

:eek:

sub-FATHER
12-08-2009, 10:14 PM
:eek:

leg rider! and not even a loud one!

profundus-sanus
12-08-2009, 10:19 PM
leg rider! and not even a loud one!

lol

you got me

:crying:

ThunderCat95
12-08-2009, 10:38 PM
:wow:

Im with you on that one, not only is all that wire dangling far too close for comfort to both the ground and suspension, but it appears to be wedged in between an air ride sensor and exhaust manifold..at least get some zip ties in there.

gtbike900
12-09-2009, 07:09 PM
no where near exhaust and it is zip tied and it just looks like it by air ride

sub-FATHER
12-09-2009, 07:14 PM
no where near exhaust and it is zip tied and it just looks like it by air ride

its garbage! ane just seeing your skillz makes me want your help someday!:laugh:

ThunderCat95
12-09-2009, 07:20 PM
no where near exhaust and it is zip tied and it just looks like it by air ride

Well that solves half of the problem!

wishuponansg
12-09-2009, 07:21 PM
its garbage! ane just seeing your skillz makes me want your help someday!:laugh:

so much for coming in peace...

Annnarbor84
12-09-2009, 09:14 PM
This thread is doomed sub2weeker is involved, he really likes leg riders and punks though:rolleyes:

NeverEnuffBass
12-09-2009, 09:44 PM
as the truck sits now

http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10490.jpg


Red wire all the way on the right... just twisted together to that other wire? Not even insulated?

sub-FATHER
12-10-2009, 01:52 AM
having a build log requires actual building to take place!

just as prices are required in the classified section.

DBBOOM
12-10-2009, 02:00 AM
This, and the first thread are fails. Just BS about a set-up that is going to happen............someday. Taking a pic of that 1/0 run and posting it was almost as dumb as admitting you ran it.

NoCoSPL
12-10-2009, 03:34 PM
I could of swore making a build log was to receive support, suggestions, and share ideas across all members of ca.com. Stop all the bashing its stupid, I'm sure gt would like a confidence boost from interested members to help keep the build log going, no one in the whole neighborhood gives a shyt about what someone is doing to their car so you bring it here so you can show what kind of progress your making if any. Sub2weeker, less posting on build logs destroying all confidence of the builder himself, where is your build log? Speaking of progress, I'm ready to see ur 160.

wishuponansg
12-10-2009, 03:48 PM
I could of swore making a build log was to receive support, suggestions, and share ideas across all members of ca.com. Stop all the bashing its stupid, I'm sure gt would like a confidence boost from interested members to help keep the build log going, no one in the whole neighborhood gives a shyt about what someone is doing to their car so you bring it here so you can show what kind of progress your making if any. Sub2weeker, less posting on build logs destroying all confidence of the builder himself, where is your build log? Speaking of progress, I'm ready to see ur 160.

win

gtbike900
12-10-2009, 04:00 PM
Sorry I Am Not Having Alot Of Free Time Workin Like 60 Hours A Week A 7000 Dallor Build Take Alot Of Work To Be Able To Afford

NoCoSPL
12-10-2009, 06:57 PM
Sorry I Am Not Having Alot Of Free Time Workin Like 60 Hours A Week A 7000 Dallor Build Take Alot Of Work To Be Able To Afford

A good build always takes time, and money, some people don't realize that. :rolleyes:

godhatescivics
12-10-2009, 08:05 PM
UPDATE
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10538.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10539.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10543.jpg

godhatescivics
12-10-2009, 08:06 PM
Alts Are Get Candy Painted And Stepped Up Will Be Here Saturday

sub-FATHER
12-10-2009, 10:14 PM
This, and the first thread are fails. Just BS about a set-up that is going to happen............someday. Taking a pic of that 1/0 run and posting it was almost as dumb as admitting you ran it.

lol.... but the batteries look nice now.

sub-FATHER
12-10-2009, 10:30 PM
I could of swore making a build log was to receive support, suggestions, and share ideas across all members of ca.com. Stop all the bashing its stupid, I'm sure gt would like a confidence boost from interested members to help keep the build log going, no one in the whole neighborhood gives a shyt about what someone is doing to their car so you bring it here so you can show what kind of progress your making if any. Sub2weeker, less posting on build logs destroying all confidence of the builder himself, where is your build log? Speaking of progress, I'm ready to see ur 160.

that is exactly what a build log is for, to show PROGRESS.

You dont put up an "IM GOING TO BUILD LOG", ask questions then talk **** because you dont like the suggestions. AND THEN have NO pictures to show of the build that is in mention.

i even gave travis the benifit of the doubt, and that build was all talk. i will continue to check out build logs and give advice and call people on their bullshit when they put up a false front.

these people can ask questions in other sections of the forum, this is the "BUILD LOG" not the ask questions log..

And josh, I'm just wondering what your problem is. you wantta talk ****?

I wasnt gonna say anything, i though i could let it go, but I'm pretty pissed off at you for telling my buddy not to buy my hifonics goliath amps at our last car show. I had four of em and he wanted to buy one and you decided to put your two cents in and talk **** telling him not to buy em, That was some btch ****.

NoCoSPL
12-11-2009, 01:22 AM
that is exactly what a build log is for, to show PROGRESS.

You dont put up an "IM GOING TO BUILD LOG", ask questions then talk **** because you dont like the suggestions. AND THEN have NO pictures to show of the build that is in mention.

i even gave travis the benifit of the doubt, and that build was all talk. i will continue to check out build logs and give advice and call people on their bullshit when they put up a false front.

these people can ask questions in other sections of the forum, this is the "BUILD LOG" not the ask questions log..

And josh, I'm just wondering what your problem is. you wantta talk ****?

I wasnt gonna say anything, i though i could let it go, but I'm pretty pissed off at you for telling my buddy not to buy my hifonics goliath amps at our last car show. I had four of em and he wanted to buy one and you decided to put your two cents in and talk **** telling him not to buy em, That was some btch ****.

Right and that is what build logs are about. Don't get me wrong but i do get kinda frustrated on here with you cause you aren't the same. In person your cool, calm and quiet and you don't argue but on here you are the opposite, im not here to make enemies especially local, which means you, and i don't want it to be awkward at spl events because we go to nearly every one.

As for your amps, im confused, i thought you had 2 and you blew 1. . . I didn't even know they were for sale or you even had more, what guy you talking about anyway?

sub-FATHER
12-11-2009, 01:35 AM
Right and that is what build logs are about. Don't get me wrong but i do get kinda frustrated on here with you cause you aren't the same. In person your cool, calm and quiet and you don't argue but on here you are the opposite, im not here to make enemies especially local, which means you, and i don't want it to be awkward at spl events because we go to nearly every one.

As for your amps, im confused, i thought you had 2 and you blew 1. . . I didn't even know they were for sale or you even had more, what guy you talking about anyway?

eric from greeley told me you said he shouldnt buy my amps and buy the 40.1 instead, since that show he wont leave james alone about buying his 40.1 and james isnt selling his... I never said anything about it because it was hear say. so i appologize if you never told him anything. but this is what i was told. and i will continue to be cool at all shows to everyone because i'm all about the cause and am not in fact the diq everyone sees me at first being. I just express my opinions openly here, and people get offended and i cant help that.

slam
12-11-2009, 02:02 AM
giving ur opinion on this build is like him giving eric his opinion on what to buy. whats the diffs? Its not on the net? just wondering

TnT_Sounds
12-11-2009, 02:07 AM
that is exactly what a build log is for, to show PROGRESS.

You dont put up an "IM GOING TO BUILD LOG", ask questions then talk **** because you dont like the suggestions. AND THEN have NO pictures to show of the build that is in mention.

i even gave travis the benifit of the doubt, and that build was all talk. i will continue to check out build logs and give advice and call people on their bullshit when they put up a false front.

these people can ask questions in other sections of the forum, this is the "BUILD LOG" not the ask questions log..

And josh, I'm just wondering what your problem is. you wantta talk ****? I wasnt gonna say anything, i though i could let it go, but I'm pretty pissed off at you for telling my buddy not to buy my hifonics goliath amps at our last car show. I had four of em and he wanted to buy one and you decided to put your two cents in and talk **** telling him not to buy em, That was some btch ****.

What the **** are you talking about? You really like to ride **** that much, that my name is always coming out of your mouth? :confused:

I dont even like you, therefore there is no benefit for you to doubt. My build is coming along actually. i will have project_pechkin come out when i we go to load the box with a forklift. Where are you door panels being built? Where is your amp? Where is the 160?

And who the **** do you think you are taking shots at Josh like that? Nobody even knows you or gives a **** who you are. Keep doubting all you want. You will never go to SBN or the big ****

Keep the bullshit somewhere else. Obviously you dont know what a ******* "BUILD LOG" is.

NoCoSPL
12-11-2009, 12:40 PM
eric from greeley told me you said he shouldnt buy my amps and buy the 40.1 instead, since that show he wont leave james alone about buying his 40.1 and james isnt selling his... I never said anything about it because it was hear say. so i appologize if you never told him anything. but this is what i was told. and i will continue to be cool at all shows to everyone because i'm all about the cause and am not in fact the diq everyone sees me at first being. I just express my opinions openly here, and people get offended and i cant help that.

Ah yes, eric I know who ur talkin about he called me yesterday trying to sell me a kinetic 1800 localy, if anyone is interested lmk. He asked me what he thinks would be a better decision, I don't quite remember so don't get me wrong but I'm sure I would of recomended the 40.1 over the hifonics ;), but that is just my 2 cents, I'm sure you have yours also, and that's fine :)

NoCoSPL
12-11-2009, 12:43 PM
I wish I could get my hands on some of those **** 16v batts. . . Next build. . .

98HOEONSIXEZ
12-11-2009, 01:28 PM
A good build always takes time, and money, some people don't realize that. :rolleyes:
i realized that ..i wish mine was only 7k...another note..nice build

98HOEONSIXEZ
12-11-2009, 01:34 PM
A good build always takes time, and money, some people don't realize that. :rolleyes:


Right and that is what build logs are about. Don't get me wrong but i do get kinda frustrated on here with you cause you aren't the same. In person your cool, calm and quiet and you don't argue but on here you are the opposite, im not here to make enemies especially local, which means you, and i don't want it to be awkward at spl events because we go to nearly every one.

As for your amps, im confused, i thought you had 2 and you blew 1. . . I didn't even know they were for sale or you even had more, what guy you talking about anyway?


welcome to the net...can be whoever you wanna be and and claim to have any and everything under the sun..... it shines its finest at ca.com

98HOEONSIXEZ
12-11-2009, 01:36 PM
I wish I could get my hands on some of those **** 16v batts. . . Next build. . .

tthhiiissss

photocrazy8
12-11-2009, 01:44 PM
Dual alts, Super hot :)

gtbike900
12-11-2009, 08:10 PM
it going quad alts as soon as i sell the bracket on there now i have some one buying it in a couple weeks and i get 16v for the low if anyone needs them

gtbike900
12-11-2009, 08:16 PM
and i will fix the 1/0 runs when i get my 4 alts on there im doing 4/0 runs to each alt and the **** under the hood is a mess i know i will fix that. external reg equils no more relay for the 2nd alt and the only reason the 1/0 runs through were it does is too keep it away from the exhaust it and it no where near the wheel it just looks like that

WrenchGuy
12-11-2009, 09:28 PM
I'm very familiar with that 1/0 placement. it can be cleaned up a little more. I wouldn't be afraid to get some tabs tacked to the frame to tie or clamp to.

Its what i got to do in my next build. It really is the best route to take so carry on. Looks like your onto something good.

sub-FATHER
12-11-2009, 09:39 PM
What the **** are you talking about? You really like to ride **** that much, that my name is always coming out of your mouth? :confused:

I dont even like you, therefore there is no benefit for you to doubt. My build is coming along actually. i will have project_pechkin come out when i we go to load the box with a forklift. Where are you door panels being built? Where is your amp? Where is the 160?

And who the **** do you think you are taking shots at Josh like that? Nobody even knows you or gives a **** who you are. Keep doubting all you want. You will never go to SBN or the big ****

Keep the bullshit somewhere else. Obviously you dont know what a ******* "BUILD LOG" is.

so now you have a forklift at your house too?

gtbike900
12-11-2009, 10:51 PM
at least some one understands why it there and not laying on my headers but i will be getting some flexable sealtight for around the wire we use it all the time when were building pools for the electrical its like flexable conduit

NoCoSPL
12-13-2009, 02:39 PM
I wish I could get my hands on some of those **** 16v batts. . . Next build. . .

gtbike900
12-13-2009, 07:34 PM
how does 165 each plus actual shipping sound for brand new kinetik 16v pm me if you need some

NoCoSPL
12-13-2009, 09:14 PM
I wish I could get my hands on some of those **** 16v batts. . . Next build. . .

godhatescivics
12-15-2009, 08:29 PM
http://i377.photobucket.com/albums/oo213/andrewsowinski/IMG_8717.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/IMG_8710.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/IMG_8709.jpg

godhatescivics
12-15-2009, 08:38 PM
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10558.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10557.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10556.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10555.jpg

98HOEONSIXEZ
12-15-2009, 08:41 PM
good stuff man

gtbike900
12-15-2009, 10:20 PM
subs and amps will be here this sunday get pics as soon as i get them and i think im getting the power master ext regulator instead of using the one pictured alts should be installed and running this weekend going up to my buddy paint shop to put them on

Mr. Slate
12-15-2009, 10:23 PM
What alternators are those?

gtbike900
12-15-2009, 10:32 PM
stock alts from a 2000 and up yukon stepped up and externaly regulated as in the model of alt cant remeber

gtbike900
12-15-2009, 10:33 PM
i think there ad244s

gtbike900
12-20-2009, 11:30 PM
2 saz4500s and 4 18 inch nightshades and 1 saz100.4 will be here late tonight and i will have pics up monday after work

godhatescivics
12-21-2009, 03:53 AM
http://i377.photobucket.com/albums/oo213/andrewsowinski/12210995000300.jpg

inkfx
12-21-2009, 06:00 AM
I'm staying tuned for the build. To me it doesn't matter how long it takes to build some **** as long as it gets done right.

But on the topic of beef, lets all meet up and fight. That should solve everything. I'm so rich I'll even buy all the tickets AND for us to eat pancakes afterwards.

dbeez
12-21-2009, 04:34 PM
looks like someone has stuff arriving..

godhatescivics
12-21-2009, 08:26 PM
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10605.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10604.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10603.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10602.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10601.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10601.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10608.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10607.jpg

godhatescivics
12-21-2009, 08:39 PM
And Well It Begins

godhatescivics
12-21-2009, 08:40 PM
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10612.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10611.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10610.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10609.jpg

godhatescivics
12-21-2009, 08:51 PM
your feelings hurt

gtbike900
12-21-2009, 09:12 PM
yep thats the subs and amps from my fantasy build you guys think i was bullshitin

RidnClean
12-21-2009, 09:15 PM
u want a cookie

gtbike900
12-21-2009, 09:16 PM
ya howie i do you got outmeal rasin

RidnClean
12-21-2009, 09:20 PM
i happen to have some, but i left em at work.

not a fan, guess that's why its still there.

dbeez
12-21-2009, 10:40 PM
this is all lies..

godhatescivics
12-21-2009, 10:58 PM
mhm

thericanballer
12-21-2009, 11:01 PM
thats nice equipment man. :thumbsup:

sub-FATHER
12-21-2009, 11:02 PM
that is a rediculous amount of 4500's

someone is balling!

godhatescivics
12-21-2009, 11:17 PM
oh you but hurt there big guy

sub-FATHER
12-21-2009, 11:20 PM
oh you but hurt there big guy

nah. just jealous because i cant ball anymore. the state and federal government put a stop to my mass production of illegal substances

gtbike900
12-21-2009, 11:20 PM
hey dbeez you will see the truck tomorrow

gtbike900
12-21-2009, 11:22 PM
ya im hurting cause of the same thing just distro

dbeez
12-21-2009, 11:22 PM
well i will see it this week for sure..

godhatescivics
12-21-2009, 11:26 PM
darren you coming up here

dbeez
12-21-2009, 11:32 PM
yep will be in norwalk from tomorrow night til sunday i wanna see some nice setups so get them all ready to show..

godhatescivics
12-21-2009, 11:39 PM
i aint got ****

dbeez
12-21-2009, 11:58 PM
wow i will have to deduct style points for that son.

Savag3
12-25-2009, 06:12 PM
I'm staying tuned for the build. To me it doesn't matter how long it takes to build some **** as long as it gets done right.

But on the topic of beef, lets all meet up and fight. That should solve everything. I'm so rich I'll even buy all the tickets AND for us to eat pancakes afterwards.

^ ^ this in every thread ^ ^

godhatescivics
12-25-2009, 08:23 PM
his temp set up
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10633.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10631.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10630.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10629.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10632.jpg

Annnarbor84
12-26-2009, 02:25 AM
Why a temp setup:confused:

gtbike900
12-26-2009, 02:45 AM
cause i had some boxes laying around and wanted some bump in my truck i should have my 2 18 test box in tomorrow and be charging at 18.4 im only doing 2 right now to figure out the proper air space for 4 of them before i build the monster box 2 layers of birch all around and a tripple top flush mount and 4x4 45ed for all corners and 2x4 for bracing

gtbike900
12-27-2009, 12:53 AM
well i built my test box today it 8.4 cubes after dis with 2 6 inch aeros tuned to 28.5 and it looks like i need more port area from how its acting im thinking like 3 6 inch aeros what do you guys think i will have pics of the box build up soon

gtbike900
12-27-2009, 12:54 AM
and my current term lab score is a 151 at 38htz on music untuned

gtbike900
12-27-2009, 12:59 AM
i also need to tune higher cause the fs is 41htz on my 18s the fs on the axis is 22htz witch is how i got away with a 9.5 cube box with 57 inches of port tuned to 27

gtbike900
12-27-2009, 01:02 AM
after i add the 3rd aero to my test box i will have 10.6875 inches of port per cube instead of 6.7 as it sits witch should help and will be tuned to 35hrz

basebalz13
12-27-2009, 01:07 AM
you finally listening to us :D

gtbike900
12-27-2009, 01:17 AM
im stubbern not stupid why do you think i built a test box

gtbike900
12-27-2009, 01:18 AM
im going to get the test box doing 154s + on 16v before i build the 4 18 box

basebalz13
12-27-2009, 01:19 AM
why? the real box wont react the same as the test box, so you are basically wasting your time

gtbike900
12-27-2009, 01:25 AM
i know that but want to at least have an idea what the subs like

icweiner
12-27-2009, 01:28 AM
yep spl subs like dem dere big ports.

gtbike900
12-27-2009, 01:28 AM
and if i go 16v and i murder the subs then i will get differant speakers or run one amp on all 4 if i find out i need 4 6 inch areos for 2 18s then i know im going to have to do a slot port instead of aeros and i want to find out my tuning

gtbike900
12-27-2009, 01:31 AM
i have $60 in the test box my the box im building for the 4 18s will be over $200 so got to make sure it at least close to what the subs want

basebalz13
12-27-2009, 01:47 AM
i know that but want to at least have an idea what the subs like

THE SUBS LIKE 4 CUBES PER SUB.

gtbike900
12-27-2009, 01:54 AM
i know that im thinkin 15 to 16 cubes common camber after dis probily 15 cubes cause in a common camber you need less port area and i need a kinda small box cause of the 10 to 11 k they will be seeing

basebalz13
12-27-2009, 01:56 AM
IMO depending on how you do the box... try and do sepeate chambers

helps with imp rise

gtbike900
12-27-2009, 01:56 AM
im going to set it up to see about 8 k daily and then adjust sub control for 10 to 11k for burps

gtbike900
12-27-2009, 02:00 AM
if i do seperate chambers then test box with 2 subs just need to be doubled after i figure out tuning on it im thinking 7.75 cubes each chamber with about 80 inchs of port tuned to 35 but i need to do testing to be sure

sub-FATHER
12-27-2009, 02:15 AM
ok. so here is my advise.... i originally said the port was too small and you would be wasting your time with the aero ports.

so now i advise you to think. you have 18s, 12s run on 4 cubes. you should be running at least 6 to these. you have the room! and build a giant slot port and you will get what your seeking after.

godhatescivics
12-27-2009, 02:17 AM
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091526.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091603.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091603a.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091641.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091651.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091750.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091751.jpg
http://i377.photobucket.com/albums/oo213/andrewsowinski/1226091816.jpg

godhatescivics
12-27-2009, 02:38 AM
up for pics

basebalz13
12-27-2009, 02:42 AM
:(

godhatescivics
12-27-2009, 02:47 AM
why you sad

icweiner
12-27-2009, 03:25 AM
why not do 6 aeros? cant hurt havin a little more port....

gtbike900
12-27-2009, 03:33 AM
thats what i was thinkin but i think im going to do a slot port aeros are kinda expensive

18inchjeepin
12-27-2009, 02:41 PM
aeros are kinda expensive

lolz, you jave $4k into your stereo and $40 is expensive

sub-FATHER
12-27-2009, 02:47 PM
lolz, you jave $4k into your stereo and $40 is expensive

kinda a bad excuse! i would still do the slot port though. this build and aeros dont mix.

XXcolossusII
12-27-2009, 02:56 PM
temp set up ?...

80INCHES
12-27-2009, 03:04 PM
ok. so here is my advise.... i originally said the port was too small and you would be wasting your time with the aero ports.

so now i advise you to think. you have 18s, 12s run on 4 cubes. you should be running at least 6 to these. you have the room! and build a giant slot port and you will get what your seeking after.

nightshade 18's like small boxes...4 cubes per 18 is fine

80

profundus-sanus
12-27-2009, 04:40 PM
http://i377.photobucket.com/albums/oo213/andrewsowinski/SDC10629.jpg

where did that ghey *** box come from?

;)

sub-FATHER
12-28-2009, 12:14 AM
nightshade 18's like small boxes...4 cubes per 18 is fine

80

the people that say that have only built small boxes and never gone big. or they only burp in that small of a box. if you want big. build big...

and if you need to make the box smaller after you build it it is allways easier to take away excess airspace than to add airspace if needed, or rebuild the box alltogether.

gtbike900
12-28-2009, 12:18 AM
where did that ghey *** box come from?

;)

they look fimilar dont they

gtbike900
12-28-2009, 12:20 AM
well i got my alts on and running externally regulated cant figure out why at idle the voltage jumps around is this normal pics should be up soon

sub-FATHER
12-28-2009, 12:22 AM
well i got my alts on and running externally regulated cant figure out why at idle the voltage jumps around is this normal pics should be up soon

run the ignition from the regulator straight to the battery and the idle will set still. and not fluctuate.

gtbike900
12-28-2009, 12:28 AM
how large of wires should i use on the ground and ignition

sub-FATHER
12-28-2009, 12:34 AM
how large of wires should i use on the ground and ignition

i used 8 guage on all three. ground, ignition and field wire from the alternator. its about the right size for the terminals on those external regulators.

gtbike900
12-28-2009, 12:39 AM
other than the idle voltage issue full tilt it only drops to 14 volts

gtbike900
12-28-2009, 12:42 AM
and i have not yet switched to 16v so im on 5 12v batts the 8 16vs in the truck are not hooked up ran out of time at the shop i left the shop at 10:45 pm

sub-FATHER
12-28-2009, 12:44 AM
other than the idle voltage issue full tilt it only drops to 14 volts

but you dont have all your amps and your box you'll be using either. so i wouldnt worry about that right now.

i really hope you take my advice on building that box bigger with a big azz slot port. they are 18s!!!! i dont care that someone else says 4 cubs works good. i'm telling you 6cubes each will give you everything your looking for. the low frequency and high numbers.

dbeez
12-28-2009, 12:47 AM
but you dont have all your amps and your box you'll be using either. so i wouldnt worry about that right now.

i really hope you take my advice on building that box bigger with a big azz slot port. they are 18s!!!! i dont care that someone else says 4 cubs works good. i'm telling you 6cubes each will give you everything your looking for. the low frequency and high numbers.

I am telling you I have ran the nightshade 18's have you...They are designed for smaller enclosure 4-5 cubes is what the shine in...

gtbike900
12-28-2009, 12:50 AM
i cant get much more than 16 cubes and still be no wall and have double thick birch box with 3rd layer flush mount baffle it will be 19.5 cubes gross

Team Nemesis-DJ
12-28-2009, 12:52 AM
but you dont have all your amps and your box you'll be using either. so i wouldnt worry about that right now.

i really hope you take my advice on building that box bigger with a big azz slot port. they are 18s!!!! i dont care that someone else says 4 cubs works good. i'm telling you 6cubes each will give you everything your looking for. the low frequency and high numbers.

We tested the NS 18 in multiple boxes ...ranging from 4-7 cubes per sub ...and 4-4.5 has been were they shine @ ...so theres really no need to build the box bigger ,when you will have to shrink it up ...

gtbike900
12-28-2009, 12:52 AM
its doing 151s on music with a port still to small so they like what there seeing just need to breathe now and be tuned higher

sub-FATHER
12-28-2009, 12:53 AM
I am telling you I have ran the nightshade 18's have you...They are designed for smaller enclosure 4-5 cubes is what the shine in...

thats great. have you fed each of your nightshades 4500 each?

or have you tried to put them in a bigger box at all?

or put 4 18s in a box together?

an 18 is a ****in 18 and the more airspace you give it the happier they will be. but what do i know! i have four 18s. why would anyone want to listen to me?

sub-FATHER
12-28-2009, 12:56 AM
We tested the NS 18 in multiple boxes ...ranging from 4-7 cubes per sub ...and 4-4.5 has been were they shine @ ...so theres really no need to build the box bigger ,when you will have to shrink it up ...

so you tested 4 18s in different boxes?

4 of these together are gonna act diffiernt in the vehicle compared to a single box in the amount of airspace it is using. these subs will sufficate and the box isnt gonna allow this system to shine the way it should

gtbike900
12-28-2009, 12:56 AM
so im doing about 16 cubes after displacement im kinda debating on common chamber and doing 2 seperate chambers to keep down rise each way has its benifits

sub-FATHER
12-28-2009, 12:58 AM
so im doing about 16 cubes after displacement im kinda debating on common chamber and doing 2 seperate chambers to keep down rise each way has its benifits

look at my build log. i have two seperate chambers and two slot ports and the dimensions are exactly what your seeking 27hz is tuned too, and i have hit a 155.2 legal on the dash with it.

DBDRAGGUY
12-28-2009, 01:01 AM
thats great. have you fed each of your nightshades 4500 each?

or have you tried to put them in a bigger box at all?

or put 4 18s in a box together?

an 18 is a ****in 18 and the more airspace you give it the happier they will be. but what do i know! i have four 18s. why would anyone want to listen to me?

YOUR AN IDIOT !

STOP GIVING ADVICE, YOU HAVE NO IDEA WHAT YOUR DOING AND YOUR DESPERATE ATTEMPTS TO CONVINCE PEOPLE YOU ARE SOME SORT OF AUDIO GURU ARE PATHETIC.

gtbike900
12-28-2009, 01:01 AM
lolz, you jave $4k into your stereo and $40 is expensive

well its a $7000 build and 6 aeros is 240 bucks and the box is $200 in birch alone plus resin and bracing

Team Nemesis-DJ
12-28-2009, 01:03 AM
so you tested 4 18s in different boxes?

4 of these together are gonna act diffiernt in the vehicle compared to a single box in the amount of airspace it is using. these subs will sufficate and the box isnt gonna allow this system to shine the way it should

Sorry ...i know nothing about these subs...i was only the first person with the NS 18 in my vehicle playing ...but to answer your question ...we built multiple single sub boxes ranging from the sizes i already posted ..and i know my install is not relavate to this install ...but i had 4 18s in a 4th order they were in a common sealed chamber =7.8

sub-FATHER
12-28-2009, 01:04 AM
YOUR AN IDIOT !

STOP GIVING ADVICE, YOU HAVE NO IDEA WHAT YOUR DOING AND YOUR DESPERATE ATTEMPTS TO CONVINCE PEOPLE YOU ARE SOME SORT OF AUDIO GURU ARE PATHETIC.

and im sure you had four 18s in your crx too.:laugh:

sub-FATHER
12-28-2009, 01:07 AM
Sorry ...i know nothing about these subs...i was only the first person with the NS 18 in my vehicle playing ...but to answer your question ...we built multiple single sub boxes ranging from the sizes i already posted ..and i know my install is not relavate to this install ...but i had 4 18s in a 4th order they were in a common sealed chamber =7.8

thats a bandpass box. but yeah you probably know how the single box designs work because you tested em.
things change when you have a big box design like this. and now that he is deciding to go with a slot port his box is gonna be even bigger than before. and what he is searching for isnt a burp system from what i've seen.

Millertime1028
12-28-2009, 01:07 AM
well its a $7000 build and 6 aeros is 240 bucks and the box is $200 in birch alone plus resin and bracing

Bet you love those credit cards

80INCHES
12-28-2009, 01:08 AM
ok. so here is my advise.... i originally said the port was too small and you would be wasting your time with the aero ports.

so now i advise you to think. you have 18s, 12s run on 4 cubes. you should be running at least 6 to these. you have the room! and build a giant slot port and you will get what your seeking after.


so you tested 4 18s in different boxes?

4 of these together are gonna act diffiernt in the vehicle compared to a single box in the amount of airspace it is using. these subs will sufficate and the box isnt gonna allow this system to shine the way it should
noob he works at sundown....so.......uh ...yea he has time to test the ns18 in every box imaginable

sub2weeker =http://j-walkblog.com/images/doyourworst.jpg

80

DBDRAGGUY
12-28-2009, 01:08 AM
and im sure you had four 18s in your crx too.:laugh:

Nope, only an idiot would attempt something like that. Seeing the 8 12's you had in your crx just further makes my point.

gtbike900
12-28-2009, 01:09 AM
Bet you love those credit cards

all paid for cash

Millertime1028
12-28-2009, 01:09 AM
sub2weeker in pawned AGAIN, as usual. Get off your high horse already and just shut the **** up for once man.

Millertime1028
12-28-2009, 01:10 AM
all paid for cash

Ballin:cool:

basebalz13
12-28-2009, 01:10 AM
wow dude, seriously PLEASE stop. you not the only person with 4 18's. HAVE YOU EVER USED A SUNDOWN NIGHTSHADE 18. if not then you have no reason for posting

gtbike900
12-28-2009, 01:10 AM
what would you guys recomend for port area per 18

sub-FATHER
12-28-2009, 01:10 AM
Nope, only an idiot would attempt something like that. Seeing the 8 12's you had in your crx just further makes my point.

dont hate. that was a masterpiece. but do us a favor and leave all the **** talking outta these threads.

sub-FATHER
12-28-2009, 01:11 AM
what would you guys recomend for port area per 18

you base that off your box. you port your box not the sub.

gtbike900
12-28-2009, 01:13 AM
well 16 cubes how much port area would you recommend

DBDRAGGUY
12-28-2009, 01:15 AM
dont hate. that was a masterpiece. but do us a favor and leave all the **** talking outta these threads.

Whatever you want to call it.

DBDRAGGUY
12-28-2009, 01:17 AM
well 16 cubes how much port area would you recommend

I used 170 sq inches for 16 cubes and it worked very well.

gtbike900
12-28-2009, 01:19 AM
and what do you think about doing 2 chambers and 2 slot ports to keep down reactive

basebalz13
12-28-2009, 01:19 AM
i would stick to the smaller side of the 12-16 Square Inches per cube since you will be tuning so low

basebalz13
12-28-2009, 01:20 AM
that would be a smart idea ;)

sub-FATHER
12-28-2009, 01:21 AM
Whatever you want to call it.

that **** was sick loud. i wish i woulda metered it. loud as *** at 60 hz yet played the super lows two. but you can talk ****.

im trying to help the guy with some ideas.

sub-FATHER
12-28-2009, 01:23 AM
i would stick to the smaller side of the 12-16 Square Inches per cube since you will be tuning so low

go with the 16 per foot or 18. if you must use a smaller box. 16 is the rule of thumb as a minimum.

gtbike900
12-28-2009, 01:24 AM
im thinkin 8 cubes per chamber with 80 inches per side what do you think

DBDRAGGUY
12-28-2009, 01:24 AM
and what do you think about doing 2 chambers and 2 slot ports to keep down reactive

I personally would do common chamber.

gtbike900
12-28-2009, 01:28 AM
at 80 inch per side tuned to 32 my ports have to be 19 inches long

80INCHES
12-28-2009, 01:29 AM
go with the 16 per foot or 18. if you must use a smaller box. 16 is the rule of thumb as a minimum.

could u stop please...u will have him tuned to the moon if u keep it up

80

TnT_Sounds
12-28-2009, 01:29 AM
I personally would do common chamber.

I think so too.

gtbike900
12-28-2009, 01:34 AM
if i do one chamber i might as well do 200 inches and shrink from there

sub-FATHER
12-28-2009, 01:34 AM
could u stop please...u will have him tuned to the moon if u keep it up

80

his port length will be around 35 inchs long at 27 hz with 16 cubes per foot on his box. if the port is smaller his port will be longer to tune that low.

gtbike900
12-28-2009, 01:35 AM
ports going to be 22 inches long though tuned to 32

TnT_Sounds
12-28-2009, 01:35 AM
if i do one chamber i might as well do 200 inches and shrink from there

Seems easier I think.

gtbike900
12-28-2009, 01:37 AM
easy to shrink hard to add lol

sub-FATHER
12-28-2009, 01:41 AM
if i do one chamber i might as well do 200 inches and shrink from there

the seperate chambers offers stability and lower impedance rise. \

and when your done with the box you have two seperate chambered boxes you can sell instead of destroying it.

its easier to run your amps and make sure your amps are strapped to 2 subs

gtbike900
12-28-2009, 01:45 AM
and if i do 2 chambers i need to do less bracing

gtbike900
12-28-2009, 01:46 AM
im still not sure though 2 ppl say chambered 2 say common camber

sub-FATHER
12-28-2009, 01:49 AM
im still not sure though 2 ppl say chambered 2 say common camber

what do you want? do what you want! just base it off of ideas and tweek it to make it your own. be inovative and create something of yours.

basebalz13
12-28-2009, 01:51 AM
his port length will be around 35 inchs long at 27 hz with 16 cubes per foot on his box. if the port is smaller his port will be longer to tune that low.

once again you are wrong, will you please just stop postin


the smaller the port area, the shorter the port has to be. the more port area the longer the ports will be. jus stick on the smaller side 80 sq for 8 cubes is a little on the small side, build a test box n try it out

gtbike900
12-28-2009, 01:53 AM
well then if im going with what i think 2 chambers would be the best and im going with 100 inches of port do to the advice i have been givin if ports to big i can always shrink it and cut down the lenght to retune

sub-FATHER
12-28-2009, 01:55 AM
once again you are wrong, will you please just stop postin


the smaller the port area, the shorter the port has to be. the more port area the longer the ports will be. jus stick on the smaller side 80 sq for 8 cubes is a little on the small side, build a test box n try it out

sorry 27 inches long with 16 ft box with 160 cubes

and 200 cubes would be 34 inches long for 27 hz...

port noise is an issue with that many subs also.

sub-FATHER
12-28-2009, 01:57 AM
feed them subs airspace since you have the juice and you will realize that 95 percent of these clowns should just sit back and watch.

basebalz13
12-28-2009, 02:18 AM
GTbike, refrain from listening to anythng sub2weeker says concerning port area and box size, and youll be good to go :)

profundus-sanus
12-28-2009, 07:35 AM
sorry 27 inches long with 16 ft box with 160 cubes

and 200 cubes would be 34 inches long for 27 hz...

port noise is an issue with that many subs also.

wtf are you talking about?

200 cubes?

YOU'RE A NEWB and everyone here knows it.. You clearly don't understand port tuning yet your trying to give advice on it? I would have to assume you mean 200 square inches instead of 200 cubic(something with an unnamed unit)?

Also your suggesting subs need more space in a common chamber when in actually they can work in less space, when common chamber.

Plus your arguing with dj...It's halarious that you think you know more about the NS than dj.

sub-FATHER
12-28-2009, 02:05 PM
wtf are you talking about?

200 cubes?

YOU'RE A NEWB and everyone here knows it.. You clearly don't understand port tuning yet your trying to give advice on it? I would have to assume you mean 200 square inches instead of 200 cubic(something with an unnamed unit)?

Also your suggesting subs need more space in a common chamber when in actually they can work in less space, when common chamber.

Plus your arguing with dj...It's halarious that you think you know more about the NS than dj.

oops... sorry bout the cubes. square! imagine that....and its obvious you know what i meant. and so does gtbike. give me a break nick. here i'll post up a 158 for you in a couple of days. maybe that will shut you up. oh and your two 12s.

i cant believe my buddy Ron Gooding has to have teammate like you! apparently you were suckin some kock to get sponsored.

i've been building for over 18 years

plugitin
12-28-2009, 02:39 PM
oops... sorry bout the cubes. square! imagine that....and its obvious you know what i meant. and so does gtbike. give me a break nick. here i'll post up a 158 for you in a couple of days. maybe that will shut you up. oh and your two 12s.

i cant believe my buddy Ron Gooding has to have teammate like you! apparently you were suckin some kock to get sponsored.

i've been building for over 18 years

everytime some one says something to you...you come back with, "well i can do this many db's, or ill show you xxx.xx dbs." It really gets old:crap:

DBDRAGGUY
12-28-2009, 02:51 PM
oops... sorry bout the cubes. square! imagine that....and its obvious you know what i meant. and so does gtbike. give me a break nick. here i'll post up a 158 for you in a couple of days. maybe that will shut you up. oh and your two 12s.

i cant believe my buddy Ron Gooding has to have teammate like you! apparently you were suckin some kock to get sponsored.

i've been building for over 18 years

Dropping names now, You just dont stop do you?

sub-FATHER
12-28-2009, 04:33 PM
Dropping names now, You just dont stop do you?

and i'de be beating *** too right about now:p: can we stop?

IMO...... i would build a bigger port and a bigger box for these subs.

i would use 16sqin per cubic foot of airspace for the port opening. minimum! he has a LOT of power he is feeding these. and a bigger box offers more as far as tuning low and still producing high numbers in this particular build.

profundus-sanus
12-28-2009, 07:48 PM
oops... sorry bout the cubes. square! imagine that....and its obvious you know what i meant. and so does gtbike. give me a break nick. here i'll post up a 158 for you in a couple of days. maybe that will shut you up. oh and your two 12s.

i cant believe my buddy Ron Gooding has to have teammate like you! apparently you were suckin some kock to get sponsored.

i've been building for over 18 years

ron left team maxxsonics a couple months ago :confused:

and the 2 12's comment :laugh:
My expedition had 4 18's walled in it as of a couple weeks ago... which i'm gutting it right now but thats irrelevant

dbeez
12-28-2009, 09:09 PM
and i'de be beating *** too right about now:p: can we stop?

IMO...... i would build a bigger port and a bigger box for these subs.

i would use 16sqin per cubic foot of airspace for the port opening. minimum! he has a LOT of power he is feeding these. and a bigger box offers more as far as tuning low and still producing high numbers in this particular build.

once again I am going to ask you to leave this thread evidentually you have no clue when you plan to really overpower a sub a huge box with huge port area is not really ideal..A smaller box will help control the sub as will the smaller port area..however i will ask again have you ever ran a nightshade at all any size since the 18 evidentually hit a nerve with you..if you have no experience with sundown subs then just stop cause you sound dumber and dumber the more you talk and who gives a **** about your walled minivan..I will pull the same numbers in a non walled suburban...

basebalz13
12-28-2009, 09:14 PM
psh, that dude on team nemisis/sundown is already doing the same^

156.6 with 2 18's non walled, and 2 3500D's

http://www.youtube.com/watch?v=AHzQF_JCF9I

Team Nemesis-DJ
12-28-2009, 09:18 PM
psh, that dude on team nemisis/sundown is already doing the same^

156.6 with 2 18's non walled, and 2 3500D's

http://www.youtube.com/watch?v=AHzQF_JCF9I

http://www.youtube.com/watch?v=AHzQF_JCF9I
lol ...what do we know ....:rolleyes::D

basebalz13
12-28-2009, 09:29 PM
http://www.youtube.com/watch?v=AHzQF_JCF9I
lol ...what do we know ....:rolleyes::D

i reckon nuttin Dj, if you put those 18's in a bigger box your going to get louder :confused:

:rolleyes: :crazy:

Millertime1028
12-28-2009, 09:30 PM
lol @ subqweefer

gtbike900
12-28-2009, 09:33 PM
called fuller this morning he said do 16 cubes with 200 inches of port tuned to 35 port being 16 inches long

gtbike900
12-28-2009, 09:34 PM
common chamber

basebalz13
12-28-2009, 09:37 PM
personally id do 2 seperate chamber, imp rise...

gtbike900
12-28-2009, 09:39 PM
i was going to but fuller said to do a common chamber

dbeez
12-28-2009, 09:47 PM
what the hell do you guys know if the box was bigger you could be doing 160's in the low 30's idiots:rolleyes:

gtbike900
12-28-2009, 09:49 PM
hey new plan im buying new amps the slap chop guys selling sham wow 20ks lolz

Mr. Slate
12-28-2009, 09:50 PM
what the hell do you guys know if the box was bigger you could be doing 160's in the low 30's idiots:rolleyes:

That would be amazing.:D

dbeez
12-28-2009, 09:52 PM
That would be amazing.:D

mr subs that last 2 weeks can make it happen contact him for details:rolleyes:

sub-FATHER
12-28-2009, 11:52 PM
http://i645.photobucket.com/albums/uu180/sub2weeker/PICT0251-1.jpg

cant help but see the similarity of the nightshades and these. am i truly that wrong?

Millertime1028
12-28-2009, 11:55 PM
Totally different motor design ^

basebalz13
12-28-2009, 11:57 PM
LMFAO holy cow, you are so fkin stupid

those are those cheap *** konaki correct?

DD.. AQ(dd knock off)... Konaki(AQ knock off)

or something like that

sub-FATHER
12-29-2009, 12:01 AM
LMFAO holy cow, you are so fkin stupid

those are those cheap *** konaki correct?

DD.. AQ(dd knock off)... Konaki(AQ knock off)

or something like that

for some reason PSI likes em
http://www.caraudio.com/forum/showthread.php?t=448615&highlight=konaki

roarzorz
12-29-2009, 12:39 AM
Whoa, a whole bunch of stupid going on in here. hahaha

gtbike900
12-29-2009, 12:41 AM
ya i would say so my ameican bass hds look nothing like my nightshades

gtbike900
12-29-2009, 12:45 AM
my hds have tripple 3/4 inch slugs my nightshaeds have triple 1 inch slugs hds have a cross drilled vented pole nightshades do not

gtbike900
12-29-2009, 12:48 AM
plus the gap in the motors are completly differant i dont think i could get a 8 layer flat would in my hd

gtbike900
12-29-2009, 12:49 AM
plus the coil and spiders are differant so how can you compare the 2

gtbike900
12-29-2009, 12:52 AM
not to mention the nightshade motor allows for a longer coil

Team Nemesis-DJ
12-29-2009, 12:54 AM
Some ppl ....just see a sub ...hmmmm ..o its a 18 and its round ...has to be the same ...

gtbike900
12-29-2009, 12:56 AM
the nightshade has a 25% bigger magnet

gtbike900
12-29-2009, 12:57 AM
no wait 33% bigger did the math wrong

gtbike900
12-29-2009, 12:59 AM
if a 18 is an 18 than why do speakers come with specs and box recommendations

DBDRAGGUY
12-29-2009, 01:22 AM
and i'de be beating *** too right about now:p: can we stop?

IMO...... i would build a bigger port and a bigger box for these subs.

i would use 16sqin per cubic foot of airspace for the port opening. minimum! he has a LOT of power he is feeding these. and a bigger box offers more as far as tuning low and still producing high numbers in this particular build.

Wow, your going to beat my *** now?:crap:

sub-FATHER
12-29-2009, 01:31 AM
Wow, your going to beat my *** now?:crap:

dude i dont even live near you. look... i'm wrong your all right. :eek:

plugitin
12-29-2009, 01:32 AM
if a 18 is an 18 than why do speakers come with specs and box recommendations

holy **** man, you do realize there is a edit button, right?

DBDRAGGUY
12-29-2009, 01:38 AM
dude i dont even live near you. look... i'm wrong your all right. :eek:

Thats good news,I was worried for a minute.

roarzorz
12-29-2009, 12:50 PM
Some ppl ....just see a sub ...hmmmm ..o its a 18 and its round ...has to be the same ...

SPL... It's one size fits all! :laugh:

basebalz13
12-29-2009, 02:15 PM
ya i would say so my ameican bass hds look nothing like my nightshades


my hds have tripple 3/4 inch slugs my nightshaeds have triple 1 inch slugs hds have a cross drilled vented pole nightshades do not


plus the gap in the motors are completly differant i dont think i could get a 8 layer flat would in my hd


plus the coil and spiders are differant so how can you compare the 2


not to mention the nightshade motor allows for a longer coil


the nightshade has a 25% bigger magnet


no wait 33% bigger did the math wrong


if a 18 is an 18 than why do speakers come with specs and box recommendations



there is a edit button, please learn to use it

on1wheel01
12-29-2009, 03:06 PM
wow there is a whole lot of ******* in this thread. How has no one banned sub2weeker yet? Please dont follow anything he says. Just because u have been "building" for 18 years doesn't mean u know what the hell ur doing. When u first joined u asked beyond newb ?'s for someone with 18 years of "experience". Listen to the other guys and ull be fine. The only thing u should listen to him about is how to **** a good wang im sure he knows all bout that lolz.

Pioneer~Saturn
12-29-2009, 03:31 PM
Whoa, a whole bunch of stupid going on in here. hahaha

Quoted for truth


thats great. have you fed each of your nightshades 4500 each?

or have you tried to put them in a bigger box at all?

or put 4 18s in a box together?

an 18 is a ****in 18 and the more airspace you give it the happier they will be. but what do i know! i have four 18s. why would anyone want to listen to me?

Quoted for wtf'ness

DBDRAGGUY
12-29-2009, 04:54 PM
Quoted for truth



Quoted for wtf'ness

Nothing to be learned in this thread FYI

grimreper912003
12-29-2009, 07:38 PM
I give my MJ18 10k in 27cu ft @ 47hz :fyi:

sub-FATHER
03-24-2010, 01:05 AM
i had to dig this thing up! cant believe it was so burried. whats up with the progress on this build???

godhatescivics
04-21-2010, 05:50 PM
trucks at the paint shop