PDA

View Full Version : grimreper912003's build



grimreper912003
12-04-2009, 02:18 AM
My build is coming together. This is the start. Stuff will be streaming in as the week goes by. :)

Truck:
http://i121.photobucket.com/albums/o225/grimreper912003/11011224a.jpg

SUBSTAGE:

Sub - 15" PSI Cascade Omega D1:
2-2.5k RMS

http://i121.photobucket.com/albums/o225/grimreper912003/tyiuy.jpg
http://i121.photobucket.com/albums/o225/grimreper912003/jkjj.jpg
http://i121.photobucket.com/albums/o225/grimreper912003/sell.jpg

Amp - Kole Audio Q1-3000D:
Said to do the rated 2300w @ 1ohm. Will be dropping her to .5ohm (was told she'll take it. Well see :))

http://i121.photobucket.com/albums/o225/grimreper912003/dscf2252.jpg
http://i121.photobucket.com/albums/o225/grimreper912003/dscf2254v.jpg

Box:
5.41 after all displacment. Tuning is ~30hz... 30.029hz to be exact. 64 sq in of port area. Should be a fun one for my chopped and screwed music :)

http://i121.photobucket.com/albums/o225/grimreper912003/541cuft.jpg

grimreper912003
12-04-2009, 02:18 AM
FRONTSTAGE:
I have ID OEM's, Hi-Vi T20-4 tweeters, and will be running passive on JL VR xovers. For an amp I will be running a Sundown SAX-125.2.

Amp:
http://i121.photobucket.com/albums/o225/grimreper912003/sundown4.jpg

My doors have been done for awhile now but this is what it looks like:
http://i121.photobucket.com/albums/o225/grimreper912003/04282005a.jpg
http://i121.photobucket.com/albums/o225/grimreper912003/04282005.jpg

ELECTRICAL:
I have a large deep cycle + Interstate starting batt right now. Plans are in the air for a second alt :)

A single run of 1/0 KLMX running to the rear batt then to the sub amp, a single run of 8awg KLMX running to the frontstage amp.

The fuse holder for my 8awg + 1/0awg to 4awg reducers are ordered.


MORE TO COME AS THE BUILD CONTINUES

grimreper912003
12-04-2009, 11:00 PM
Threw the sub in my 5 cu ft box @ 32hz w/ 111sq in of port (still need to build a new one) off my cheap 2ch amp (mids on 1ch at 2Ω and sub one 2ch at 2Ω) Its temp but the sub already flexs my mirrors and seats :)

Maybe pics tomorrow :)

Annnarbor84
12-04-2009, 11:05 PM
Looks good man:)

grimreper912003
12-04-2009, 11:09 PM
Thanks man. Any update on your build for the 18"s?

Annnarbor84
12-04-2009, 11:10 PM
Thanks man. Any update on your build for the 18"s?

Keep an eye on the thread, will be updated as stuff arrives this week:)

tez4life
12-04-2009, 11:15 PM
http://i121.photobucket.com/albums/o225/grimreper912003/sundown4.jpg


Who would take such a ugly picture of such a beautiful amp......:D

Good stuff man, looks like a nice build. I miss my Oems, they should do very well on that Sundown. Have fun. :)

grimreper912003
12-04-2009, 11:17 PM
http://i121.photobucket.com/albums/o225/grimreper912003/sundown4.jpg


Who would take such a ugly picture of such a beautiful amp......:D

Good stuff man, looks like a nice build. I miss my Oems, they should do very well on that Sundown. Have fun. :)

once it gets here I will update :P. It looks like the sub amp and frontstage amp will be here at the same time :)

Plottin4success
12-05-2009, 04:38 AM
Im gonna be runnin the same amp. Nice Hoe BTW. :)

DonH
12-05-2009, 09:36 PM
that amp will do about 2300 @ .5ohm but not 1 ohm. watch in on the hotter days. had the swiss model, same board and it went poof @ .5ohm on a warmer day :crying:

also watch the speaker terminal outputs as nothing hits them with the slightest of force! they use a 90 degree angle which is extremely delicate and can crack! hence why all new amps use 45 degree angles


oh and the little fan is noisy as ****!

grimreper912003
12-05-2009, 09:42 PM
that amp will do about 2300 @ .5ohm but not 1 ohm. watch in on the hotter days. had the swiss model, same board and it went poof @ .5ohm on a warmer day :crying:

also watch the speaker terminal outputs as nothing hits them with the slightest of force! they use a 90 degree angle which is extremely delicate and can crack! hence why all new amps use 45 degree angles


oh and the little fan is noisy as ****!

Thanks man, will do!

Corey J.
12-05-2009, 09:48 PM
Looks like ill have to check this one out ! I am always in for Wisconsin builds , especially if they are in Madtown !

grimreper912003
12-05-2009, 09:54 PM
Looks like ill have to check this one out ! I am always in for Wisconsin builds , especially if they are in Madtown !

Il be at the radio doctor shows this year :) Probably bassracing :)

godhatescivics
12-05-2009, 09:55 PM
Mee Two I Hope Coreys Gotta Pay For My Gas Thoe

grimreper912003
12-06-2009, 12:35 AM
Just worked out a trade deal for one of these :)

C&D UPS12-370FR
Volts: 12
Amps: 100Ah
Length: 13.42
Width: 6.8
Height: 9.48
Terminals: TI
Weight: (74)
Manufacturer: C&D

http://i79.photobucket.com/albums/j160/grnreaper01/cdbatt.jpg

Snow90
12-06-2009, 05:41 PM
nice man.

looking forward to seeing the end result.

One Bad MOFO
12-06-2009, 05:47 PM
Looks good so far. You going to be going to Dropfest or any of the bigger shows farther north in WI this year?

grimreper912003
12-07-2009, 12:27 AM
I may be. I'd like to. Need to rep Team Lethal Beatz this year.

I changed the box up little bit. Its now 4.98 cu ft net @ 32.1hz w/ 64sq in of port. But now it has a nifty spot for my batt :). Im willing to give up some cubes for that. Im thinking it will look pretty clean when its done and it allows the box to sit further from the back.

Still is 48x17.5x17.5, so externally the same as the other design.

http://i121.photobucket.com/albums/o225/grimreper912003/498.jpg

Whatchya think?

grimreper912003
12-07-2009, 05:59 PM
Very small update but its something. Both the men in blue and the men in brown brought something to me today. :)

8awg fise holder
2x 1/0awg to 4awg reducers :)
http://i121.photobucket.com/albums/o225/grimreper912003/12071547.jpg

Both amps and batt should be here wednesday :D

on1wheel01
12-07-2009, 07:08 PM
lookin good so far

grimreper912003
12-10-2009, 03:39 PM
threw the amp in @ 2 ohm. Its pretty **** Loud. Maybe vids at .5ohm if my batt comes :)

on1wheel01
12-10-2009, 03:45 PM
Dang the batt not in yet? Ahhh bad weather huh. Sorry bro but gotta blame it on ups lol

One Bad MOFO
12-10-2009, 04:36 PM
I may be. I'd like to. Need to rep Team Lethal Beatz this year.

Sweet. I'm hoping to have my build finished by the time the big shows start around here. It'd be cool to see some other people competing with omegas.

grimreper912003
12-10-2009, 05:56 PM
Batt came in. It is a monster! 74lbs of goodness. I thought my batt was heavy but fawk.
http://i121.photobucket.com/albums/o225/grimreper912003/100_0995.jpg
Next to a 6.5" mid for a size reference
http://i121.photobucket.com/albums/o225/grimreper912003/100_0996.jpg
Also my SAX-125.2 came in. I couldnt get rid of my grin when I was opening it. I've wanted a sundown amp for over a year.
http://i121.photobucket.com/albums/o225/grimreper912003/100_0994.jpg

modskwod
12-10-2009, 07:45 PM
Nice stuff! Should be good once you're done

grimreper912003
12-20-2009, 06:40 PM
Small update, got my second batt in finally. I think it looks pretty clean. I think I need a new deck though :(

http://i121.photobucket.com/albums/o225/grimreper912003/1220091545.jpg
http://i121.photobucket.com/albums/o225/grimreper912003/1220091545a.jpg
http://i121.photobucket.com/albums/o225/grimreper912003/1220091545b.jpg