View Full Version : 1986 Chevy Silverado
12-03-2009, 11:37 AM
I need help from someone who owns or has access to a '86 silverado I need a enclosure design and the max dimensions i get are just a little over 3ft cubed I got -2 12" Sundown Audio SA12's- and they will be powered by a -Sundown sae1200d- im told i need 4ft cubed ported and there is some more room to use but i cant really describe the dimensions so if you can help me out please do... this might also be a long shot but.... whatever.
The Space I have
12-03-2009, 10:37 PM
12-05-2009, 10:43 AM
I had 2 sundown E8's in my 89 silverado on 600rms.
2 12SA's will be ridiculous.
its only a single cab, so I could take dimensions of the box I still have. but it was only like 1.5^3ft tuned to 35hz I built with a PVC aero port..
12-06-2009, 01:37 PM
Can you make boxes and **** niqqa? or if your good at takin some dimension and **** maybe you can help me out that way i can get a design off here or something and build me one.
12-06-2009, 01:41 PM
were you at? im in lafayette
12-06-2009, 02:11 PM
im in decatur too.
i just found that there is a top builder/installer in fort wayne josh bordner hes like ranked in the top 10 nationally. crazy. id rather go with the cheaper route though :)
12-06-2009, 02:13 PM
I would go with 2 10's with that little space. you wont get the full potential out of 12's. Can those go in sealed?
12-06-2009, 08:22 PM
1ft^3 sealed but theyd be better ported no? =]
12-06-2009, 08:23 PM
hey im in indiana and have the same truck. do you need a box built or just a design n measurements
12-06-2009, 09:04 PM
design and measurements! or possibly a box price? i might be down that way soon but just design at the moment... it needs to be like 4cubed ported so measurements or design thanks a lot.
12-06-2009, 09:52 PM
do you have a bench seat? if so i find it near impossible that your gonna get 4 cubes BEHIND the seat.
12-06-2009, 10:05 PM
yes bench =[ im short as hell so i could move up some.. also like them speakers in back you know how they slant? i could build slanted so it fits good no?and if i have to go a little past hump on wall
12-06-2009, 10:07 PM
ill be honest, im not gonna measure n design and figure out how to make it work for free. if you want me to build the box we can talk but..
12-06-2009, 10:12 PM
yes they'd be louder ported but a small space like that 2 10's would be more than enough, even in sealed with the right power.
about 3.4 cu/ft ported for 2 10's would be insanley loud in a single cab, or 1 12.
let me know your measuerments and I'll help you out. the slant does make better use of your space. the problem i had when building a box behind a seat and using every possible inch was my seat would hit the sub, the slant and back if off about 1inch from the seat would take care of that.
12-06-2009, 10:13 PM
there is seriously NO room behind the seat in the truck for 4 cubes and deep enough for the woofers, i mean if you CAN slide the seat all the way up and have no problem driving like that all the time there actually is room but im WAY too big to sit like that, if you can/do let me know.
12-06-2009, 10:30 PM
im short not all the way up but enough id think... ill let you know how many clicks i can move forward... yeah i sent you pm and said i can pay if needed... just measurements or if you do design lmk.
12-06-2009, 10:34 PM
figured i was going to need some room from hittin the sub if i need the inch i might just find a way too push in the seat cover deal.12s will be loud but this might just be winter and im jonesin 4bump
12-08-2009, 03:37 PM