PDA

View Full Version : 2K10 Rebuild - What is Worst up to.



Johnny Law.Lulz
12-01-2009, 05:38 PM
Audio
- AQ 2200
- SAX 125.2
- Custom Sundown Z12 with Nightshade softparts
- 2.37 Cubic Feet before displacements. Tuned to 35hz with 2 3" Aeros
- Lanzar Opti 6.5" Components ( will review shortly )
- Kinetik HC1800 ( Already there, want to go to a 2400 )
- Powermaster 250 Amp Alt ( Already there )
- Alpine 9886 ( already there, will be Alpine flip out in a few months )
- Alpine 6 Disk CD changer, will be hiddin in the center console.
- All Knukonceptz wiring.

- Old System - So i had the 3 E8's on the SAE-1200 when i had my bench seat, Since then i have taken the buckets and a center console from a Bronco.

- Goals - I am building this to be a daily pounder and it will see some amateur street classes in MECA untill i build my ranger.

- Help - Mobius ( SP? ) is making me a cut sheet, Ill be doing everything my self and my stepdad is going to carpet it all for me.

What it will go in.
http://i92.photobucket.com/albums/l8/worstenemy453/P1050313.jpg

Early Pix.
http://i92.photobucket.com/albums/l8/worstenemy453/P1050308.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1050309.jpg

This is 2 full sheets of 3/4, i need them to cut it down so i could fit it in the truck with no hangover :laugh:
http://i92.photobucket.com/albums/l8/worstenemy453/P1050310.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/P1050311.jpg


Part of the vast arsenal. The Bosch table saw

http://i92.photobucket.com/albums/l8/worstenemy453/P1050312.jpg


I have already put 4 sheets of deadner in each door and installed the Lanzar Opti's, i didnt take any pix = ( Ill take pix of my tweet location though.

Other things that will happen in the next month or 2.
- 4" Rough country suspension lift
- Offset wagon wheel powder coated black. 15"
- MT MTZ's, Swamper M16's, Maxxis Buckshots 35"x12.50x15 ( havnt decided which one i want yet )
- Body work will be done and truck will be put in primer.
- Painted in the spring.
- Regeared to 4.10s ( 4x4 )

k_schutte
12-01-2009, 05:45 PM
goddam AQ amps are ****! Good luck with yout build!

Johnny Law.Lulz
12-01-2009, 05:47 PM
I really wanted the 90x4 to keep things clean but i got a good deal on the SAX and i think its pretty **** too. I will post pix of the sub when i get it. Im paying Jacob tonight.

michaellane
12-01-2009, 06:01 PM
will that kinetik 1800 be enough for that amp?

Johnny Law.Lulz
12-01-2009, 06:02 PM
It will for now with the Alty. I want a 2400 or i will add something like a 1200 or 1400. If i add a second it will go under the hood as well.

89chevy
12-01-2009, 06:10 PM
you should be good with that battery and alt i just finished and installed my box in my single cab with 2 hdc3 10s and a 2200d and all i have is stock alt and a kinetik 1400 with the big 3 and i havent seen below 14 over long period playing but havent thrown the full power to subs yet still breaking in.

Johnny Law.Lulz
12-01-2009, 06:13 PM
I dont really have the big 3 but all my wire is 4 gauge already, only thing that wasnt was my Alt wire and i made that 4 gauge when i put it in.

Truck is an 1989 F-150 XLT lariat with 5.0 and A4OD Auto trans, mostly stock performance wise and it will stay that way other than finishinh my exhaust cuz i want to focus on a ranger project.

bumpin buick
12-01-2009, 06:13 PM
Lookin good, I love the Z series from Sundown, good subs.

basebalz13
12-02-2009, 12:47 AM
ranger project??? hmmmm

S.B.C.
12-02-2009, 12:50 AM
cute

Johnny Law.Lulz
12-02-2009, 12:52 AM
ranger project??? hmmmm

I love mini trucks too :laugh:

Ill do a lil teaser, Square body extended cab ranger with a slightly worked 302/C4 swap, lowered to the ground, all flat black done correctly, motor blacked out, Saleen wheels powdercoated flat black and then come the equipment :crazy: That will come in a month or too, i have to gather funds :greedy:

basebalz13
12-02-2009, 12:54 AM
pics or lies -.-

Johnny Law.Lulz
12-02-2009, 12:57 AM
No pix yet. Im in planning stages now, ill be buying the engine/trans in January hopefully and hope to have it finished this time next year so she'll be ready to compete in 2K11.

I gotta get this 351W/C6 and the bronco rolling chassis outta the driveway before the parents let me bring another project in. Plus gotta get my 1983 Yamahas sold too.

QuantumAudio
12-02-2009, 01:18 AM
2 sheets of MDF for a 2 cube box?? Hell I didnt even use 2 sheets on my 18 cube box

Johnny Law.Lulz
12-02-2009, 09:49 AM
My box is 61" wide 14 tall in the back, 9 deep at bottom and 5 at the top. I need 2 peices to get all the long pieces cut. Ill have a lot of leftovers but that will do my amp rack.

DB-Audio
12-02-2009, 02:21 PM
pics man get some pics

DNick454
12-02-2009, 02:23 PM
:thumbsup: for a system that costs more than the car :laugh:

Johnny Law.Lulz
12-02-2009, 02:23 PM
Its raining today and Mobeious hasnt gotten my cutsheet to me so no progress lol. Ill take some pix of the buckets in the truck so you can see how much room im workin with.

Johnny Law.Lulz
12-02-2009, 02:24 PM
:thumbsup: for a system that costs more than the car :laugh:

I only paid $800 for the truck :laugh::laugh::laugh::laugh:

DNick454
12-02-2009, 02:30 PM
I only paid $800 for the truck :laugh::laugh::laugh::laugh:


What engine, 4x4? miles? tranny?

Johnny Law.Lulz
12-02-2009, 02:32 PM
I dont really have the big 3 but all my wire is 4 gauge already, only thing that wasnt was my Alt wire and i made that 4 gauge when i put it in.

Truck is an 1989 F-150 XLT lariat with 5.0 and A4OD Auto trans, mostly stock performance wise and it will stay that way other than finishinh my exhaust cuz i want to focus on a ranger project.


What engine, 4x4? miles? tranny?

Poast

Has 177K on it. Runs amazing, will idle at 600 All day if i kept gas in it.

manny1337
12-02-2009, 06:59 PM
i really like the bodys of those old fords but im a gm truck guy myself ;).


get some more pics of install. and whatd you do with the 8's?

Savag3
12-02-2009, 07:09 PM
:thumbsup: for a system that costs more than the car :laugh:

but that would include 75% of all sik system vehicles . .

Johnny Law.Lulz
12-03-2009, 06:43 PM
i really like the bodys of those old fords but im a gm truck guy myself ;).


get some more pics of install. and whatd you do with the 8's?

I traded the 8" to Retroaudioinc so some carbon fiber mat so i can start doing carbon fiber dustcaps and ****.


but that would include 75% of all sik system vehicles . .

:laugh::laugh:



Heres the update from my sub with a quote from jacob, ill proly build the box on Sunday.


I used the new triple joint ring that I made for the Z v.2 and NS v.2 on
here as well...

Added a little bit of padding for the leads on the cone - I noted a
slight tapping at full excursion even with the tied down leads.

Just waiting on dust cap... trimmed the former as much as possible so
hopefully it fits.

- Jacob


http://i92.photobucket.com/albums/l8/worstenemy453/CIMG3129.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/CIMG3130.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/CIMG3131.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/CIMG3137.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/CIMG3133.jpg
http://i92.photobucket.com/albums/l8/worstenemy453/CIMG3136.jpg

statonburrell
12-03-2009, 06:49 PM
even with 2 threads on the same subject, you still won't be loud :fyi:

Johnny Law.Lulz
12-03-2009, 06:50 PM
This thread is about my build, the other thread is about my sub = )

statonburrell
12-03-2009, 06:52 PM
lol im just messin with ya man good luck with the project, hopefully I can start my build soon just gotta find a salvage title crew cab silverado 4x4.. gonna do a blowthrough with 4 15's on 12k watts tuned to 34 Hz:cool:

Johnny Law.Lulz
12-03-2009, 06:55 PM
Mines better, im getting loud witout cutting **** up.

statonburrell
12-03-2009, 07:01 PM
thats why im doing it to a salvage title truck

Johnny Law.Lulz
12-03-2009, 07:02 PM
My ranger project will be louder than you if it kills me doing it.

statonburrell
12-03-2009, 07:03 PM
lol but will it be tuned as low?? i'm only trying to bass race the 49.9 class and hopefully middle weight bass box

Johnny Law.Lulz
12-04-2009, 03:44 PM
lol but will it be tuned as low?? i'm only trying to bass race the 49.9 class and hopefully middle weight bass box

Im going to tune to 34ish. like you. Im thinking 4 12"s on 12K. Will be able to be played daily. Maybe 2 sick *** 15"s



Box cutsheet is here, ill be hopefully throwing it together Sunday.

Johnny Law.Lulz
12-09-2009, 11:49 AM
Well i polished the strip on the SAX and took the sundown and SAX 125.2 emblems off.

Im going to start building the box today, my ports will be here friday and i think the sub will be here saturday.

Im just going to paint the box black and save my money for my other project.

basebalz13
12-09-2009, 11:51 AM
why did you take the emblems off?

Johnny Law.Lulz
12-09-2009, 12:00 PM
Because i wanted it to look clean. You can still kinda see the SAX ones if you look at the right angle and if you flip over the silver strip, that emblem is still there.