PDA

View Full Version : 2.9 cubes 39hz 8 Inch Aero



amartin_72
11-27-2009, 11:18 PM
This box is for two HDC copper 10's only 1500rms each, a tad bigger than my previous boxes ive had it in, 1.4 and 1.3ft. Only have one hdc10 for now, I might run two in the spring, but I just picked up 4 concept 10's for some friends and before I sell them to them I thought Id build my two HDC box and throw the concepts in there to try them out. The box and port are a little too big for these concepts and you can hear it, they would sound better in 1.25 each but they get loud for 30 bucks shipped each.

2.9 cubes NET, 4 cubes gross subs and port displace 1 cube.
48 inches port area 39hz www.audible-engineering.com (www.audible-engineering.com) 8" port

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk005.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk004.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk007.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk008.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk009.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk011.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk012.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk014.jpg



Ill finish the box later with resin and truck bedliner. thanks for looking

amartin_72
11-27-2009, 11:19 PM
http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk015.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk018.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk020.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk021.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk023.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk024.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk025.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk026.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk027.jpg

amartin_72
11-27-2009, 11:20 PM
http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk030.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk031.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk032.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk033.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk034.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk035.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk036.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk037.jpg

http://i37.photobucket.com/albums/e76/amartin_72/3%20cubes%2039hz/hlkkkjkk038.jpg

amartin_72
11-27-2009, 11:35 PM
The 3M packing tape is the best coupler i've found so far for the ports once they're wrapped they are rock solid.

basscort2009
11-28-2009, 01:35 AM
amazing! :D