PDA

View Full Version : Spray Adhesive ???



Johnny Law.Lulz
11-26-2009, 11:30 PM
Looking for something as good or close to 3m Super 77 for cheaper. Any suggestions ?

Johnny Law.Lulz
11-26-2009, 11:34 PM
??

Johnny Law.Lulz
11-26-2009, 11:43 PM
up

RAM_Designs
11-26-2009, 11:45 PM
wow, a little impatient?

RAM_Designs
11-26-2009, 11:46 PM
???

RAM_Designs
11-26-2009, 11:46 PM
??

Johnny Law.Lulz
11-26-2009, 11:46 PM
just a little

hazardous0388
11-26-2009, 11:46 PM
just use the 3m. its great stuff.

Johnny Law.Lulz
11-26-2009, 11:47 PM
it aint cheap niqqa

altoncustomtech
11-27-2009, 12:02 AM
i doubt anything that is equivalent will be any less expensive...... I've used the cheaper stuff before, several different brands and had HORRIBLE results.... 3M and V&S 1081 are worth the money cuz they really work.....

hazardous0388
11-27-2009, 12:04 AM
i doubt anything that is equivalent will be any less expensive...... I've used the cheaper stuff before, several different brands and had HORRIBLE results.... 3M and V&S 1081 are worth the money cuz they really work.....

this is a smart guy right here. i used a can of the 3m on each of my door when i apholstered them and have never had any issues. great CHEAP way to carpet paneling or boxes.

I Like Waffle
11-27-2009, 12:07 AM
i use sta-put. Its bad ***. Construction grade stuff from what i heard. Never seen it in stores though, i get it from a friend who steals it from work.

hatedonmostly
11-27-2009, 12:10 AM
i use sta-put. Its bad ***. Construction grade stuff from what i heard. Never seen it in stores though, i get it from a friend who steals it from work.

Not a cool story bro.

Blue Fury
11-27-2009, 12:38 AM
Not a cool story bro.
lie

BassMechkanic
11-27-2009, 01:12 AM
you get what youu pay for, 3m great for small fast jobs, or contact cement (headlinerglue) stuff used to make firmica counter tops on lager jobs need to withstand the heat

mlstrass
11-27-2009, 01:19 PM
powerpoxy available at most menard's is cheaper and MUCH better then 3M...

Canaan
11-28-2009, 11:56 AM
To hell w/ the stuff in a can.

Buy yourself a cheap latex spray gun and use contact cement.
Woodweld Original (no the gel) works fine and you can get it for ~$35 a gallon. I just have a $40 Kobalt sprayer, its works fine. After ~7 boxes, it more than paid for itself vs. paying for canned stuff every time.

Also w/ the Woodweld cement, you have more work time to get your seams perfect.


http://www.lowes.com/lowes/lkn?action=productDetail&productId=41163-68-00273&lpage=none

SPL Blazer
11-28-2009, 02:08 PM
I believe the OP was asking for something just as good as the 3M, only cheaper. Buying a spray gun and using $35 a can adhesive isn't what he's looking for.

I've used Gorilla glue, it ******. I've used the 3M Vinyl adhesive, it ******. And I've used a couple different types of the 3M super adhesive, the Super 77 I believe it's called worked out really well and it's not that much $$. If your making a project that you want to look good then don't be a cheapskate, you get what you pay for.

Johnny Law.Lulz
11-28-2009, 02:30 PM
I went ahead and bought the Super 77, I was concerned because i saw it for $22.75 a can at Fastenal but i told my stepdad and he said Lowes should be cheaper. Lowes had it for like $10.15 so its all good.

TMali
11-28-2009, 02:32 PM
ive always used 3m super 90...but that only because i get it for free

SPL Blazer
11-28-2009, 02:47 PM
The Super 77 and Super 90 are what I've always preferred, at least when painting a box wasn't an option.

Johnny Law.Lulz
11-28-2009, 03:18 PM
Yeah, id rather not paint. Im just going with the normal black carpet.

SPL Blazer
11-28-2009, 03:26 PM
Painting isn't for everyone, or for any application, but they do look a lot better than carpet.

Johnny Law.Lulz
11-28-2009, 03:27 PM
Id paint it if i had the time but i dont really. Id put a nice layer of fiberglass around everything and color match.