PDA

View Full Version : Need help with a box plans



Independence83m
11-18-2009, 05:50 PM
I have a chevy blazer and i have a lot of room for a box, which is going to hold only one 12. But i totally forgot how to do this (i built one before for 2 12JLw3's), i need some real help. I am willing to pay someone for a design or do whatever it takes to get this thing done.

its a RE *** 12d4 and it calls for 2@33Hz(i would like a slot port)
the sub displacement is .15 cu ft and i'm working with about 28 inch length.

PV Audio
11-18-2009, 05:54 PM
http://img23.imageshack.us/img23/6509/215cubes32hz27sqin3ai.png

That's 2.15 @ 32hz. After displacement, it'll be 2 @ ~33-34 which is fine.

Independence83m
11-18-2009, 08:06 PM
appreciate ya bud.

PV Audio
11-19-2009, 12:03 AM
Don't appreciate me, I just took it from Moe. There's a link at the top of this forum. :)

Independence83m
11-19-2009, 03:18 PM
i checked it out but i didn't do the simple math of adding the .15 and didn't know if the tuning was right.

iamamp3pimp
11-19-2009, 03:25 PM
That is a solid enclosure. if you are willing to have a tiny amount of trust, get @ me....I have many many ideas for a design like this.