View Full Version : hole for sub
09-07-2009, 05:26 PM
well, i'm building a ported box and i have a question:
whats the better place to put the sub? right in the center, at the edge opposite to the vent? no matter where?
09-07-2009, 06:08 PM
wow i don't even kno where to start / wait that's because you didn't give enuff info??
all will depend on box type /placement/type of port /size of port etc...
09-07-2009, 10:19 PM
it's a quite simple vented box. the design i got it from reaudio enclosure calculator site. so, it is an L ported box, 2cuft tuned at 33hz.
the front plate, where the sub typically goes is 19 x 13.
the box height is 14, width is 22.5, and depth is 17. port with 2 inches.
09-07-2009, 10:40 PM
A box that maximizes air space between the back of the cone and the entrance of the port typically seems to be the safest way to go. But there are really a lot of factors that go into it, so take that statement with a grain of salt.
09-08-2009, 09:38 AM
i guess i'll go the conventional way. thx