PDA

View Full Version : I messed up my box, lol.



Gearstix
08-26-2009, 01:53 PM
My box will be double baffle.
I've got the first baffle screwed and glued onto the box. I drew out the sub holes and cut them out with a jig saw, figuring I could trace them out on the second baffle.

When I got the sub holes cut out I realized, the first baffle is screwed to the box. LOL.

So is there any way I can transfer the position of the sub holes to the second baffle?

tRiGgEr
08-26-2009, 02:02 PM
It's easy...

Measure it's location and transfer it directly to the top piece...

Or be ghetto and cut out an adhesive circle of the cutout location. Then just place it upside down on the box and slap the top piece on. Pick it up and there is your cutout location lol.

JuicyJeff
08-26-2009, 02:04 PM
You could try using one of those soft pencil things, ebony i think or something like that. But give it a good solid trace and when you put a piece of paper over the wood it will leave an image on the paper. Theres your stencil

statonburrell
08-26-2009, 02:05 PM
so thats how they do it in canada eh?

Gearstix
08-26-2009, 03:44 PM
It's easy...

Measure it's location and transfer it directly to the top piece...



Thats what I had in mind, I was just worried about it as I don't have any more MDF. Its done now though, thanks.


so thats how they do it in canada eh?
Useless post, eh?

grimreper912003
08-26-2009, 03:48 PM
Throw it away. Start over :)