PDA

View Full Version : 2cu @ 34hz - check my design?



I Like Waffle
08-25-2009, 09:55 PM
Tommorow im gonna pick up some wood from home depot and throw together a couple boxes for a single 12" combined with some wood ive got laying around. Boxes will be exactly 2 cubes BEFORE sub and port displacement, i figure about 1.5 cubes after displacement? Will measure

25.5" wide
13.5" deep
12" high

heres a quick pic of the design, thinking of using one 6" port for it...not sure yet, may do one 4" port depending on the length needed. Got plenty of PVC laying around.


http://i29.tinypic.com/2u97e2o.jpg


These boxes will be for a couple of audiobahn and dub 12"s i picked up for cheap, the mid grade ones rated for 400 rms i think. Do you guys think ill get decent performance out of 2 cubes ported with this design or should i just do sealed? My goal here is just to get it sounding pretty decent so i can sell them off to a couple people, music will probably be rap most of the time also.

captnfangdango
08-25-2009, 10:03 PM
what do you think about a slot port?
http://img34.imageshack.us/i/2cubes35hz4025sqin9vv.png/

I Like Waffle
08-25-2009, 10:05 PM
Not wanting to do a slot, ive done a few round port boxes and ive gotten great output from them and theyre easy to do, just getting the length right *****