Where to find 8" pvc pipe?

[basscort2009]

i googled it and didnt find anything. where can i find some 8" pvc pipe. i only need like a foot or less for a port i need to make asap.

[RAM_Designs]

Construction site...just walk on and take some scraps.

[Rich B]

Use Sonotube or Quicktube (pillar molds for construction) if you cant find PVC.

Its thick waterproof cardboard, and unlike PVC it doesnt resonate with low bass notes.

It might be available at a Lowes or a Home Depot, but Im not sure.

[bhsdriller]

Could buy a sonotube

Edit:beat me to it

[18inchjeepin]

my local menards ad, said you can order 8,10, and 12 inch pvc

[basscort2009]

my local menards ad, said you can order 8,10, and 12 inch pvc

any website?

[basscort2009]

Construction site...just walk on and take some scraps.

wish it was that easy for me

[mrogowski]

Sonotube - its good and cheap.

[basscort2009]

Use Sonotube or Quicktube (pillar molds for construction) if you cant find PVC.

Its thick waterproof cardboard, and unlike PVC it doesnt resonate with low bass notes.

It might be available at a Lowes or a Home Depot, but Im not sure.

i saw that and felt it, i can bend and crack that stuff easy. how will it fare being faced frontward so the inside will be flying around since it wont be braced? i would like some more input n these sonance tubes so i can do some research and maybe make a lowes run tonight lol

[amartin_72]

I have 8" flared ports and I buy the pvc in bulk. What do you need?

[basscort2009]

i cant fit a 8" flare. only pvc straight pipe. i need 10 inches but like a foot and a half for good measure i ya got some pm me and send some pics please?

[spl_robb]

i saw that and felt it, i can bend and crack that stuff easy. how will it fare being faced frontward so the inside will be flying around since it wont be braced? i would like some more input n these sonance tubes so i can do some research and maybe make a lowes run tonight lol

its an easy fix on that, just add some layers of resin.
i will do that to mine, i am just changing tuning on my box to see what suits me better.

[amartin_72]

Pvc will not crack, and it does not resonate at low frequencys it is very strong. Unless you find the real contractor sonotube the stuff at lowes is like 1/16 thick and flimsy, youll end up spending tons on resin to stiffen them up.

[basscort2009]

resin will be a PITA to get allll in there lol. or i guess i could just resin the outside.... lol

[basscort2009]

Pvc will not crack, and it does not resonate at low frequencys it is very strong. Unless you find the real contractor sonotube the stuff at lowes is like 1/16 thick and flimsy, youll end up spending tons on resin to stiffen them up.

thats what i was talking about the stuff at lowes is crappy. where can i find some real sonotube?

[amartin_72]

http://i37.photobucket.com/albums/e76/amartin_72/DSCF0941.jpg I can just give you a custom length of the center section on the ports.

[basscort2009]

awesome man! how much for 11 inches and how much for 17 inches? shipped on each amount please

[hunterw]

i got my 8in pipe here....ferguson. i dont know which one of these would have it but its a start

http://www.ferguson.com/FergusonLocationsDirectory/Locations.action?CLEARPREFS=TRUE&address=75201

[basscort2009]

crap i cant get link to work.

[hunterw]

well just go to ferguson.com and use the location finder lol

[basscort2009]

amartin clear ur pms! lol

[basscort2009]

well just go to ferguson.com and use the location finder lol

cant figure out the site :/ im slow i guess.... lol

[xseveredveganx]

cant figure out the site :/ im slow i guess.... lol

It doesn't have the product on the site. I do believe hunterw just goes to his local Ferguson and purchases the pipe.

[basscort2009]

gotcha. well theres one 8 minutes away from me so i ma go see what there prices are

[MakeshiftAudio]

I get broken pieces of it from Locke Supply. Average of $18-20 for a usable 6'-7'.

[amartin_72]

Sorry

[basscort2009]

I get broken pieces of it from Locke Supply. Average of $18-20 for a usable 6'-7'.

eh i got a little better deal fromamartin. ill keep it in mind though if it dont work out.

[mlstrass]

most plumbers will have pieces of 8" pipe you can get for cheap, but I'd do the 8" aero...

[basscort2009]

yea i got the 8 inch half aero ported tube from amartin.

[mazdakid]

how tall is the 8" with the flare?

[basscort2009]

beats me. may wanna ask him. im only doing one flare cuz thats all i can fit. and im externally porting it

[DBfan187]

construction sites, H&S Supply

[basscort2009]

construction sites, H&S Supply

already got some. thanks though

[80INCHES]

http://www.usplastic.com/catalog/product.asp?catalog%5Fname=USPlastic&category%5Fname=13834&product%5Fid=16848

/thread

80

[basscort2009]

^^ uh i already got some and its way thicker than that flimsy plastic stuff. thanks though