PDA

View Full Version : Somebody please check my box design



dextermoped
08-18-2009, 12:08 PM
So this is my first crack at designing a box, my trunks dimensions are 32" X 36" X 14" Wanted to stay a little inside of that though so I can have a tiny bit of trunk. Car is an 90 Integra hatchback so I wanted the subs and ports to fire up. Friend is building the box has really good woodworking skills but hasnt built a Sub box. Need to double check that I designed the box correctly and that it wont be overly complicated to build. I have two Hifonics 12" square Brutus subs. I wanted them to be in seperate chambers so that I can turn one off when the wife rides with me. Thanks for any help or tips

http://i400.photobucket.com/albums/pp87/dextermoped/box2_12_2cuA35Hz.jpg

dextermoped
08-18-2009, 11:08 PM
anyone?

hatemonger
08-18-2009, 11:12 PM
how wide and tall is the port? if the port piece is 16 inches long, then inside of the port can't be 16.

dextermoped
08-18-2009, 11:56 PM
The port is 2" X 14.875"

Ryan1126
08-19-2009, 12:00 AM
are you going to have enough mounting depth? 9.5" isnt much

dextermoped
08-19-2009, 12:02 AM
Sub is about 7" tall, is that enough room?

Ryan1126
08-19-2009, 12:03 AM
oh okay then yes, you have enough room.

hatemonger
08-19-2009, 05:31 PM
if the last leg of the port needs to be 16 inches down the middle, then the back port piece/panel would be 13.25 inches instead of 16, assuming you put the box together exactly as drawn.