PDA

View Full Version : box design help please



uGotF-ckedUp
08-14-2009, 01:06 AM
can someone design me a new box for my RE SE 15. displacement is 0.17 ft^3
4 cubic foot after all displacement, and i want angles in the corner of the port and angled port. tuned around 35hz.

or can someone teach me how to figure it all out? =]

thanks

plugitin
08-14-2009, 03:36 AM
angled port? Your max dimensions would be helpful too...

uGotF-ckedUp
08-14-2009, 12:30 PM
its going in a impreza hatch, so around 35" wide, 30 deep, and how ever tall

plugitin
08-14-2009, 01:01 PM
i'm still confused on the angled port thing...search google for a box calculator...i like rockford fosgates.

uGotF-ckedUp
08-14-2009, 03:36 PM
just like this box http://www.caraudio.com/forum/showthread.php?p=6473948#post6473948
its pretty much the size i need to

box is going to go in a 97 subi impreza hatchback..
i dont have the car yet, because i have to go to Minnesota to get it from my uncle

dappa5
08-14-2009, 03:39 PM
so hit up d_man 1 he'll quote it for you
if not lmk i'll give you a quote

uGotF-ckedUp
08-15-2009, 01:05 AM
i will build it.. i just dont know how to figure out the what the port length should be.. i want a pretty wide port. my box right now has a 5" wide port =] .

plugitin
08-15-2009, 02:51 AM
have you tried to google "port calculator"? You will find some very useful calculators...

dappa5
08-15-2009, 08:06 AM
i will build it.. i just dont know how to figure out the what the port length should be.. i want a pretty wide port. my box right now has a 5" wide port =] .
you don't want to go to wide
to much port area can also be bad
so if a 5" wide by w/e port equals 25 in^2 of port area per ft^3 it may not work well this is why port tunning is so imPORTant /rule of thumb for slots is 12-16 in^2 per ft^3 of net volume
that being said I've gone both bigger and smaller with good results and with not so good results
it all depends on set up box/subs/vehicle/imp rise/voltage/etc......
not to be a DB but you should hit up some one to DESIGN you an enclosure
you can still build it but that way you kno what the outcome will be b-4 building it so no :smash: after building most guys here will charge $5-15
some will do it free / some will give you simple design and some will provide cutsheets and assembly sheets (so easy ,a caveman could do it ) so it is worth it to ask for design quotes and get it right 1st time /not that you wouldn't but better to be sure
hope this helped srry to be so long winded :crap:

uGotF-ckedUp
08-15-2009, 01:16 PM
port is 5" by 12.5 inches. so thats what 62.5in^2?
box is 3.5ft^3 and tuned at 35 hz

dappa5
08-15-2009, 01:22 PM
wow how long is that thing 30+ inches??
and it's not too oversized it's only 17 in^2 per cube so you good there

SSS 18734
08-15-2009, 01:23 PM
Here's a free design I made a while back. It's pretty much exactly what you need. The port will be side-firing, though. With your width, that shouldn't be a problem.

http://www.caraudio.com/forum/showthread.php?t=393770

uGotF-ckedUp
08-19-2009, 03:00 PM
wow how long is that thing 30+ inches??
and it's not too oversized it's only 17 in^2 per cube so you good there

i dont remember for sure but i think the box is 30" x 30" x 14"
port is 29 1/4" long

heres a pic of the box
http://i151.photobucket.com/albums/s140/Young-mikado/se15box.jpg

DonH
08-19-2009, 03:06 PM
hey bro! u need a design right.... my pm thingy is acting all ghey!

i can shoot a design togethar right quick and accurate for u with cutsheet and simple directions on how to construct for 10 bux.... also if u wanted i can put a list of what everything u will need for construction to finish! i charge a flat $10.90 through paypal... LMK BRO!


and to explain the 45 degree in the corner of the port.... it is so the corner of the port will have continuous width and not get larger then smaller again like in a corner ....

dappa5
08-19-2009, 06:42 PM
what a coincidence that's what I charge lol