PDA

View Full Version : Is this possible?



kinglbj7385
08-12-2009, 02:58 PM
well i need some help guys. I want to just do a single sealed 15 in my trunk but he only problem is that the max height in my trunk is 13".
I wanna do a wedge enclosure but im not sure if it will work because the mounting depth of the sub i want is like 8". can anyone draw me up something quick? max dimensions would be W-38 H-13 D-28.
http://www.the12volt.com/caraudio/boxcalcs.asp#wed
There are two diff types on there and i thought the second one would work better for what im trying to do but any way you can get it to work is good with me. i could draw something up but i cant figure out if the mounting depth of the sub will screw it up. thanks guys

Oh yea i want it to be about 2.6-2.7 before sub displacement so about 2.5 with the sub in

kinglbj7385
08-12-2009, 03:06 PM
oh and i forgot, but i wanted to make it as slanted as possible so it would point more towards the back of the car and not upwards. thanks fellas

dappa5
08-12-2009, 03:18 PM
n/m

dappa5
08-12-2009, 03:27 PM
n/m

dappa5
08-12-2009, 06:45 PM
accually i was bored and i looked up that sub and no it is possible
for that sub you need @least 16" of vertical (or near vertical)face to achieve that with you max height of 13 " you must go to 54 ish degrees and @ that angle the sub is to big
the mounting depth is 8"
and hole dia is 14"
disreguard how far back the box goes i just made it big the angled part is the important part http://i668.photobucket.com/albums/vv50/DAPPA5/15sealed-2.jpg